X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-167-29707

Well Details

Well ID: 34-167-29707
Loading map...
Country: United States
State: Ohio
County: Washington
Municipality: Belpre Township
Operator Name: BROAD STREET SERV LLC
Well Pad ID:
Farm/Lease Name: FLOWERS WAYNE & LORETTA(SWIW #14)
License Status: Final Restoration
License Date: 2011-12-06
Spud Date: 2012-02-06
Spud Drilling Contractor: G & L DRILLING
Final Drill Date: 2012-04-27
Well Total Depth: 6045.00 ft
Configuration: Vertical
Latitude: 39.300000
Longitude: -81.610000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2011-12-06 Proposed Formations: CLINTON - MEDINA, Issued Date:12/6/2011, Expired Date:12/5/2013 12:00:00 PM, Drilling unit acres:71.758, Proposed Well Type:SWD, Proposed Well Class:SWIW
Last Compliance Report 2011-12-06 LOST HOLE @ 6050'.
Reached Total Depth 2012-04-27 LOST HOLE @ 6050'.
Plugged/Abandoned 2012-06-18 LOST HOLE @ 6050'.
Completion Report Received 2013-02-25 LOST HOLE @ 6050'.
Construction Permit Expires 2013-12-05 LOST HOLE @ 6050'.
Record Last Modified 2017-10-24 LOST HOLE @ 6050'.

For data sources see[2]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2012-02-16 0 0 0 After a failed test, the POB was tested today to 500# for 15 min. and it held. This well is feared to hit large amounts of water and wanted to be ready to stop if encounered. Also homes within 1000' so I required the test.

For data sources see[3]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1197597243 2013-1-31 0:00: SW No Violations
-306711034 2012-4-18 0:00: DD No Violations
-447762035 2012-7-13 0:00: DD No Violations 0.40
-766838026 2012-4-16 0:00: DD No Violations
-980194908 2012-4-12 0:00: SW No Violations
0306711034 2012-04-18 Drill / Deepen / Reopen No Violations Stopped by drill rig for update they were still reaming out well bore @5210 drilling 3 min per ft, according to driller they should be at total depth later this week and possibly be ready to run casing this weekend.
0307238255 2012-02-09 Drill / Deepen / Reopen No Violations I found drill rig on location coming out of the hole due to a plugged bit. They report an injector is going out of the rig engine so it is slow going - they predict, if they can get the engine fixed, that should be ready to cement surface casing late Friday or sometime on Saturday. The drill pit has been properly lined and the water truck is bringing in fresh water for the cementing. The permit is posted in doghouse and silt fences are positioned on the down side of rig to protect the small stream contamination.
0447762035 2012-07-13 Drill / Deepen / Reopen No Violations A random inspection this day found both drilling and plugging pits still open, about to run over with fresh water due to heavy rains earlier in the week. Oil had accumulated in a ditch above the culvert below the drill pit, possibly from frac tank or some other source but about to go into drainage ditch. Built dike to stop it and called Tony of Broad Street - he said would have trucks down right away to drain pits and clean up any oil on the ground. Oil only in patch about 2 long and less than a quart but pit looks like it might have more on top. I or another inspector will check on Monday to make sure all work is completed.
0452514725 2012-04-12 Drill / Deepen / Reopen No Violations Killbarger drill rig shows up 4/9/2012, starts cleaning hole 4/10/2012. This day, they were at 3565 and shut down briefly to mix salt water mud. They did not start to ream hole until 2810 and this day while waiting, ran DV tool to see if hole was not straight. Found it to be 2.5 degrees off at 1800, at 3550/ was zero degrees off. This does not explain why previous service rig had trouble getting down hole between 1500-1900.
0455487351 2012-03-05 Drill / Deepen / Reopen No Violations My inspection this day to determine if remnants of spill are visible and to view how clean-up is going. Silt fences still up, supported by straw bales but all signs of drilling mud in the shallow pools in the pasture are gone. G & L drill rig is moving off location today, Broad Street will have Knox Energy service rig come in and clean out hole and run production casing. Company water truck on location draining the pits. Took pictures showing no cutting or signs of drilling mud in the stream, also across the road where mud had run into larger creek. Today, I saw no traces of drilling mud or cuttings. Citation is RESOLVED.
0766838026 2012-04-16 Drill / Deepen / Reopen No Violations Kilbarger reaming out well bore attempting to clean up well bore so they can run and cement casing in place, they were @4707 drilling on fluid.
0919062130 2012-03-08 Drill / Deepen / Reopen No Violations The rig today was unloading bigger mud pump from Kilbargers when I arrived. They had 4576 of casing in the hole with a latch down plug, shoe and tooth bit (with port removed) on the bottom. They said they would be mixing mud all afternoon, would start back on the hole first thing in morning. Hoped to cement late Friday or the weekend.
0980194908 2012-04-12 Salt Water Injection Well No Violations Stopped by drill site to check on drilling status they were tripping bit@4226 Kilbarger Drilling on site reaming well bore trying to get hole in condition to run casing to bottom and cement it in place.
1197597243 2013-01-31 Salt Water Injection Well No Violations Inspection revealed that injection pump was in operation during my inspection and it was noted that B&D Oil Gathering was unloading at site during my inspection.
1241354551 2012-02-07 Drill / Deepen / Reopen No Violations My inspection this day routine, due to drill rig starting to drill. On arrival, found they were about 1 hr from starting to drill out from under conductor, it was cemented in place last night. I stated the need for a blow out pre-venter and that we should do the test after surface casing is set. The surface casing will go thru the Berea - target injection zone the Clinton/Medina.
1250735796 2012-03-01 Drill / Deepen / Reopen Violations Noted I arrived at drill rig today at 8:15 AM, having been called out to witness cementing of production string of casing. When I arrived, I found they were not ready but had casing in the well to 5500 and could not circulate. Casing was again stuck in the hole. When I did arrive, found small stream that parallels lease road running with drilling mud. I found the drill hole was full of mud and running over onto the surrounding ground and was running down into the small stream below the rig instead of running down the flow ditch from the rig and into the drilling pit. As we arrived the drill crew was quickly trying to shut off the flow of mud, using the dozer to cover and fill in the ditch the mud was flowing downhill to the stream. Bill Stolanick quickly took samples while I went up the rig and took pictures and gathered information as to what had happened. After closing off the ditch, the stream was flowing clean at the end of an hour. I called OEPA, Rocky King, supervisor and starting working on clean-up. Much of the drill mud had crossed the road thru the culvert and was laying in shallow pools in Mr. Flowers cow pasture. I advised him to keep cows out for a few days. In conversation with Trevor Irwin from OEPA, decided to let these pools dry up and work into the ground. He says they do not look at drill mud as a hazardous material. He suggested if there were sediments laying on the stream bed, to collect and dispose of properly. Late in the afternoon, rig owner and Broad Street supervisor still trying to find a way to get casing run to bottom and cemented. Citation will be written - owner needs to clean up area impacted by spilled drill mud, fix spilled pit liner.
1321403211 2012-02-23 Drill / Deepen / Reopen No Violations Total depth of 6177 for this well reached on 2/19/2012. They hit no significant water while drilling the initial 6.5 hole. 2/19 - Open- hole logged well and loggers only got to 5900 - top of Clinton sand was 5800. They came out of the hole, went back in with drill pipe and bit and drilled to 6277 - cleaned hole 2.5 hrs. (with air and soap), came out of hole. 2/20/12 - Again tried to log and only got to 5600. 2/21/12 - went back in with 4.5 casing and drill bit (jets removed) in hopes of getting to bottom and cementing casing - used 300 bbl oil-based mud that was 10.5# weight . Started heavy mud at 5200 - starting 400 above where well got tight. At 5644 lost circulation, pulled out 2 joints to try and get circulation back, twisted off 2/22/12 PM at @5600. Pulled casing and found 3570 with bit left in hole. 2/23/12 - Overshot grapple fishing tool arrived with operator, heavy mud coming in - digging and lining a 2nd pit to mix mud. Have decided to ream hole all the way down with 7 7/8 bit. Went back in fishing tool, grabbed casing and found it free - found it had dropped @ 120 in hole. Will begin again 2/24/12 AM with fresh start to recover 3570 of casing left in hole. Goal is to ream hole to bottom, drilling with heavy mud and LCM additives, clean hole, go back in with casing and cement in place. From 2/22/12 on, well making considerable water and blowing back out of hole at connections - they are still pumping water down other disposal well on property and I strongly suggested they shut it down until this well cemented. They say too costly as have a take or pay contract. To be continued.
1331599379 2012-03-12 Drill / Deepen / Reopen No Violations On 3/8, rig had casing in the hole to 4576 and was starting to mix mud in hopes of getting pipe to bottom and cementing it in place. After I left, they found bit on bottom of casing was plugged and they would have to come out of the hole. They pulled all pipe on 3/8. On Friday, 3/9/12, they decided to run a deviation tool in the hole and this was scheduled for 3/12. I was on location this day to see the logger try to run tool and he got to 5485 which was in the base of the Big Lime. He could not go deeper but this was 1000 deeper than the rig got with casing. The data is being studied and decision will be made soon as to what the next step will be.
1340189632 2012-06-17 Plug / Plug Back No Violations On site to witness plugging operation on lost hole.
1441538159 2013-09-30 Final Restoration No Violations Well has been plugged. Site has been graded and vegetation has been established. Spoke with landowner and he is satisfied with the restoration. No evidence of any equipment was observed.
1985039823 2012-06-12 Salt Water Injection Well No Violations Waiting on service rig to plug said well.
2050723671 2012-04-26 Drill / Deepen / Reopen No Violations 4/16/12 - Talked to tool pusher, Gary Smith - he said they were at 4707 this morning and tripping for a bit - will put on a new tri-cone. Had tripped Friday night when they thought their PDC bit was bad and had put on a re-run tri-cone at that time. Still drilling slow. I passed this information on to Dave Ball, the UIC inspector. 4/23/12 - Talked to Ed Butler and he reports rig is at 5945 and still reaming. They should finish this week, clean & condition the hole and then run casing & cement in place. 4/25/12 - Talked with Ed Butler - he says they will plug the hole - wanted to know how we wanted it plugged. I suggested he call Dave Ball as he is UIC inspector. The rig went back in the hole after unplugging the bit and could only get to 5885 - lost almost 100. Later in day talked to Dave Ball and they decided to try all day 4/26/12 and then make a decision on whether to plug.
307238255 2012-2-9 0:00:0 DD No Violations 1.00
452514725 2012-4-12 0:00: DD No Violations 3.00
455487351 2012-3-5 0:00:0 DD No Violations 2.00
919062130 2012-3-8 0:00:0 DD No Violations 1.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1250735796 US-OH-106699 2012-03-02 Drilling operation causing pollution and contamination
1250735796 US-OH-106700 2012-03-02 Disposal of muds or cutting in violations of a rule

For data sources see[4]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-167-29707&oldid=14059155"