X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-163-20885

Well Details

Well ID: 34-163-20885
Loading map...
Country: United States
State: Ohio
County: Meigs
Municipality: Columbia Township
Operator Name: BANCEQUITY PETROLEUM CORPORATI
Well Pad ID:
Farm/Lease Name: AHMED/ELLIS
License Status: Active Injection
License Date: 1986-01-27
Spud Date: 1986-01-30
Spud Drilling Contractor: CO TOOLS
Final Drill Date: 1986-02-27
Well Total Depth: 2590.00 ft
Configuration: Vertical
Latitude: 39.200000
Longitude: -82.270000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1985-12-05 110 TANSKY J/TANSKY OIL PROD GeoDate 12/5/85
Oil and Gas 1985-12-05 Issued Date 12/5/85 Expired Date 12/5/86 Acres 0010000 Tool Type CT Proposed Formation BEREA Proposed Depth 00000 Proposed Drill Depth 00000
CO 1986-01-27 110 TANSKY J/TANSKY OIL PROD GeoDate 1/27/86
Salt Water Injection Well 1986-01-27 Issued Date 1/27/86 Expired Date 1/27/87 Acres 0010000 Tool Type CT Proposed Formation ONONDAGA Proposed Depth 02590 Proposed Drill Depth 02590
Storage Well 1986-01-27 Issued Date 1/27/86 Expired Date 1/27/87 Acres 0010000 Tool Type CT Proposed Formation ONONDAGA Proposed Depth 02590 Proposed Drill Depth 02590
Original Spud 1986-01-30 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Completed 1986-02-27 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Reached Total Depth 1986-02-27 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Annulus Pressure Monitoring Approved 1986-06-18 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
First Injection 1986-06-18 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Completion Report Received 1986-06-24 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Construction Permit Expires 1987-01-27 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Change of Owner 1997-07-25 Operator changed from 110, TANSKY J/TANSKY OIL PROD to 4801, BANCEQUITY PETROLEUM CORP
Last Compliance Report 2016-12-27 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.
Record Last Modified 2017-10-19 DRILLED AS SWIW CONVERT 2-1-86 I.P. A.F.

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2000-05-08 2508 2520 2
2508 2520 2
2508 2520 2

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
ACID 0 1900 Gal 0 ACID;1500GAL ACID AND 400 GAL OF WATER

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1988 TANSKY J/TANSKY OIL PROD 0.00 533.00 366
1989 TANSKY J/TANSKY OIL PROD 0.00 406.00 365
1990 TANSKY J/TANSKY OIL PROD 0.00 0.00 365
1991 TANSKY J/TANSKY OIL PROD 0.00 490.00 365
1992 TANSKY J/TANSKY OIL PROD 0.00 211.00 365
1993 TANSKY J/TANSKY OIL PROD 0.00 272.00 365
1994 TANSKY J/TANSKY OIL PROD 0.00 0.00 365
1995 TANSKY J/TANSKY OIL PROD 0.00 0.00 365
1996 TANSKY J/TANSKY OIL PROD 0.00 0.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1988 TANSKY J/TANSKY OIL PROD Brine 0 366
1989 TANSKY J/TANSKY OIL PROD Brine 0 365
1990 TANSKY J/TANSKY OIL PROD Brine 0 365
1991 TANSKY J/TANSKY OIL PROD Brine 0 365
1992 TANSKY J/TANSKY OIL PROD Brine 0 365
1993 TANSKY J/TANSKY OIL PROD Brine 0 365
1994 TANSKY J/TANSKY OIL PROD Brine 0 365
1995 TANSKY J/TANSKY OIL PROD Brine 0 365
1996 TANSKY J/TANSKY OIL PROD Brine 0 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1030911599 2020-5-28 0:00: SW No Violations 3.00
-1139264332 2013-2-12 0:00: SW No Violations 2.00
-1156527164 2010-3-22 0:00: SW No Violations
-1287940721 2010-9-23 0:00: SW No Violations 1.00
-1415573204 2018-1-3 0:00:0 SW No Violations 0.30
-1561344386 2012-4-26 0:00: SC No Violations
-1611305155 2020-2-24 0:00: SW No Violations 4.00
-1648071760 2011-8-22 0:00: SW No Violations
-1659343750 2009-6-15 0:00: SW No Violations
-16714452 2012-8-31 0:00: SW No Violations 1.50
-1720426544 2008-9-16 0:00: SW No Violations
-1724926489 2019-1-29 0:00: SW No Violations 2.30
-1734127772 2008-2-11 0:00: SW No Violations
-1735197046 2019-4-29 0:00: SW No Violations 1.00
-1743958642 2015-8-10 0:00: SC No Violations 0.70
-1888553662 2007-11-5 0:00: SW No Violations
-1907233193 2005-1-12 0:00: SW No Violations
-195134001 2017-2-27 0:00: SW No Violations 1.00
-197596680 2011-3-29 0:00: SW No Violations
-1981311621 2004-1-15 0:00: SW No Violations
-2024948160 2018-5-15 0:00: SW No Violations 3.20
-2082491979 2006-9-25 0:00: SW No Violations
-395487262 2018-10-11 0:00 SW No Violations 2.70
-513402976 2019-4-29 0:00: SW No Violations
-547274727 2017-7-14 0:00: SW No Violations 1.00
-548055831 2012-4-20 0:00: SC No Violations 3.00
-585156901 2009-9-1 0:00:0 SW No Violations
-831528171 2019-11-14 0:00 SW No Violations 2.00
-905643794 2003-1-30 0:00: SW No Violations
0000PL2239 Preliminary Restoration No Violations Preliminary Restoration done information from Data Point
0001269i12 2001-01-18 Salt Water Injection Well Violations Noted An inspection revealed Injection and Annulus pressures were the equal when first checked after bleeding off Annulus pressure checked pressure again and it had built up to 60 lbs and stayed for approx. 10 minutes. Request that the next monthly MIT test performed by company that an inspector be present to witness test .
0010260516 2016-06-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification posted at the well and facility. Containment dike was free of fluids.
001269i407 2001-10-02 Salt Water Injection Well No Violations
001269i852 2002-03-06 Production Wells Violations Noted An inspection of the well revealed that the dike around the storage tanks is standing 1/2 full of water, also the liner in the dike may have failed due to brush growing in the dike, water pump leaking brine, oily gravel in dike area. NEED TO EMPTY DIKE, REPAIR OR REPLACE LINER IN DIKE, REPAIR WATER PUMP, CLEAN-UP ALL OILY GRAVEL AND CONTAMINATED GRAVEL FROM DIKE.
0016714452 2012-08-31 Salt Water Injection Well No Violations No violations were noted at the time of inspection.
0053954508 2016-02-23 Salt Water Injection Well No Violations Compliance Notice # 1456437349 Follow up inspection. The leaking 2 union on the injection line has been replaced. Inspected the containment dike, tanks, unloading pad, injection pump, injection line, injection pressure and annulus pressure.
005609i209 2001-06-01 Salt Water Injection Well No Violations No violations at this time.
01269i1228 2002-07-23 Salt Water Injection Well No Violations Pressures on well meet requirements at this time, filters at well will need to be removed from site.
01269i1322 2002-08-20 Salt Water Injection Well No Violations In-Complinace.
01269i1551 2002-11-21 Salt Water Injection Well No Violations No violations at this time, lease rd will need graded and water breaks in spring.
0148919856 2012-04-26 Enhanced Recovery Project No Violations Observed new unloading pad with Inspector Jon Scott. Then performed regular status check.
0165933288 2016-12-21 Salt Water Injection Well No Violations Mechanical Integrity Test. Tested the annulus at 770 psi, at 5 minutes 760 psi, at 15 minutes 735 psi.
0178139816 2006-07-12 Salt Water Injection Well Violations Noted An inspection was conducted at the facility owned by Bancequity Petroleum Corp. on 7/12/2006. During the inspection, it was noted that a fitting located at the storage tank needs replaced. An oil discharge was observed around this area.
0195134001 2017-02-27 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted at the facility and the well. The containment dike is free of fluids.
0197596680 2011-03-29 Salt Water Injection Well No Violations Good identification at tank battery. 1/4 ball valve on annulus has a crack in the valve body and needs replaced. I talked to Jess Hess and Tom Fischietto about the valve.
0261933827 2012-04-19 Surface Facility Construction No Violations Witnessed construction of unloading pad at tank battery. Crews were forming up and preparing to pour concrete.
0273491706 2007-04-19 Salt Water Injection Well No Violations No violations were noted.
0342075127 2009-03-02 Salt Water Injection Well No Violations An inspection revealed no violations at this time.
0358201034 2018-07-16 Salt Water Injection Well No Violations Inspected the unload pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted at the well and facility.
0387007605 2013-05-15 Salt Water Injection Well No Violations Inspected injection pressure, annulus pressure, containment dike, injection pump, tanks and unloading pad. Tanks have been painted. Dike has new sump pit with a sump pump connected to a steel horizontal tank in the containment dike. A brine sample was collected from a Bancequity brine truck (UIC # 25-476) Sample to be shipped to ODNR Lab.
0395487262 2018-10-11 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids.
0434413212 2006-11-13 Salt Water Injection Well No Violations A follow-up inspection on 11/13/2006 revealed that the previously noted violations have been resolved.
0438417582 2013-03-28 Salt Water Injection Well Violations Noted Inspected injection pressure and annulus pressure. 3 yellow plastic line 6 feet from pump has a pin hole and is leaking brine into dike. I called Mike McPeak and told him about the leak. Mike said that he will come to the dike today. I placed a red marking ribbon on the 3 line next to the leak.
0494985850 2015-08-11 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pressure and annulus pressure.
0513402976 2019-04-29 Salt Water Injection Well Violations Noted Our records indicate that the Division has not received the Salt Water Injection Well Annual Report (Form 204) that was due on April 15th for 2018, Please submit the Form 204 to the Division by 5/29/2019.
0547274727 2017-07-14 Salt Water Injection Well No Violations Quarterly UIC inspection. The annulus pressure was 421 PSI, the injection tubing was 328 PSI. Legible identification was posted. No violations noted.
0548055831 2012-04-20 Surface Facility Construction No Violations Witnessed the concrete being poured for the unloading pad.
0585156901 2009-09-01 Salt Water Injection Well No Violations An inspection was conducted with Mr. Jeff Fry, West Region Oil & Gas Supervisor and UIC Field Supervisor. During the inspection, it was noted that corrosion exists around the outside of casing. Low Range Quantabs revealed no chlorides in fluid found dripping from the tubing. When the gauge was removed from the annulus, the fluid released resembled corrosion inhibitor. The pressure(s) for injection and annulus were close in value and noted as 250/240.
0594801966 2009-12-09 Salt Water Injection Well No Violations An inspection revealed no violations.
0706858123 2011-11-02 Salt Water Injection Well No Violations Accompanied Jon Scott on inspection.
0725217064 2008-12-16 Salt Water Injection Well No Violations No violations were noted.
0769040020 2007-07-03 Salt Water Injection Well No Violations No violations were noted.
0832084189 2014-10-02 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Witnessed the testing of a 2 black plastic SDR 11 line from the Surface facility to the Beckley SWIW facility # 883.
0905643794 2003-01-30 Salt Water Injection Well No Violations No violations at this time.
0952107953 2008-05-27 Salt Water Injection Well No Violations No violations were noted.
0959117696 2006-11-03 Administrative Inspection No Violations The company was contacted by telephone on 11/3/2006 and informed to resolve this violation within a week.
10260516 2016-6-15 0:00: SW No Violations 1.00
1048949607 2007-01-11 Salt Water Injection Well No Violations No violations were noted.
1091468270 2004-07-29 Salt Water Injection Well No Violations No violations
1139264332 2013-02-12 Salt Water Injection Well No Violations There is some fluid in the tank battery. Injection pumps were running at the time of inspection. Spoke with Mike McPeak about the fluid in the tank battery. He stated that the next time the water truck is out there, he will have it sucked out. No other violations were noted.
1152991768 2012-06-18 Salt Water Injection Well No Violations Upon arrival, I observed a couple of inches of water inside the tank battery. Recent rain events were the reason for this. I mentioned this to Mike Mcpeak. He agreed to remedy the situation.
1156527164 2010-03-22 Salt Water Injection Well No Violations An inspection revealed no violations at this time.
1269i12 2001-1-18 0:00: SW No Violations
1269i1228 2002-7-23 0:00: SW No Violations
1269i1322 2002-8-20 0:00: SW No Violations
1269i1551 2002-11-21 0:00 SW No Violations
1269i35509 2001-02-15 Salt Water Injection Well No Violations Follow - up on NOV , tested Annulus of well to max. injection pressure . Test pressure at 765 lbs for 15 minutes , no lose. Dennis Crist also witnessed the test. IN - COMPLAINCE
1269i3550949 2001-2-15 0:00: SW No Violations
1269i407 2001-10-2 0:00: SW No Violations
1269i852 2002-3-6 0:00:0 PW No Violations
1287940721 2010-09-23 Salt Water Injection Well No Violations An inspection revealed no violations. Note: The gauge utilized for this inspection will require calibration.
1349378763 2012-10-01 Salt Water Injection Well No Violations Inspected injection pressure and annulus pressure. Collected brine sample from brine tank. Sample taken to Ohio Department of Natural Resources, Division of Oil and Gas Lab. Mike McPeak was on site during sampling.
1379007452 2013-09-10 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection line, annulus pressure, and injection pressure. Containment dike is free of water. Met with Mike McPeak on site to talk about the 1 steel line that is installed from the injection pump to the unloading pad. The 1 line drains leaking brine from the injection pump to the unloading pad sump, which is connected to a tank with in the containment dike. Mike told me that the connection was temporary and it will be changed as soon as a new pump for the injection pump sump is installed.
1393431198 2014-02-26 Salt Water Injection Well No Violations Inspected containment dike, tanks, unloading pad, injection pump, annulus pressure and injection pressure. Identification posted at the containment dike and well site.
1403716866 2014-06-25 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, unloading pad, annulus pressure, and injection pressure. Checked brine hauling log and witnessed the unloading of a Bancequity brine truck. Unloading pad has two cracks that need to be repaired. I called and talked to Mike McPeak and we discussed the unloading pad cracks and that they need to repair them.
1410877951 2014-09-16 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, annulus pressure and injection pressure. Good identification at the containment dike and well. Containment dike is free of water. Met with Mike McPeak on site to discuss the well operations.
1415573204 2018-01-03 Salt Water Injection Well No Violations The salt water injection well had 375 psi on the annulus and 260 psi on the injection tubing. The containment dike was relativity free of fluids. Legible identification was posted.
1418069198 2014-12-08 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, annulus pressure and injection pressure. Witnessed Bancequity truck unloading on the pad.
1426785320 2015-03-19 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. Containment dike was free of fluids. Identification was posted at the well and containment dike. Injection pump was in operation during the inspection.
1433860791 2015-06-09 Salt Water Injection Well No Violations Inspected the containment dike, tanks, injection pump, unloading pad, injection pressure and annulus pressure. Identification posted at well and facility. Containment dike is free of fluids.
1445341329 2015-10-19 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Containment dike was free of water. Identification posted at facility and well site.
1456437349 2016-02-22 Salt Water Injection Well Violations Noted Inspected the unloading pad, containment dike, tanks, injection pump, injection line, injection pressure and annulus pressure. The injection pressure and annulus pressure were both 350 psi. I called Mike McPeak and he came to the well site. Mike shut off the injection pump and we monitored the annulus and injection tubing pressures. The injection tubing pressure declined to 300 psi while the annulus stayed at 350psi. I talked to Mike about a leaking union on the injection line. Mike is scheduling the union to be replaced. The leak is with in the containment dike area.
1460822929 2012-04-26 Salt Water Injection Well No Violations Dike is full of water. Talked to Mike McPeak about removing the water from dike.
1461582844 2003-10-30 Salt Water Injection Well No Violations No violations
1470748543 2016-07-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted at the facility and the well site. The containment dike was free of fluids.
1475680509 2016-10-03 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification posted at the well and facility. The containment dike is free of fluids.
148919856 2012-4-26 0:00: ER No Violations 1.50
1561344386 2012-04-26 Surface Facility Construction No Violations Unloading pad has been constructed. Sump pump is installed and line is connected to steel tank.
1588270493 2020-4-30 0:00: SW No Violations 1.50
1592572368 2020-5-21 0:00: SW No Violations 4.50
1645609207 2013-04-04 Salt Water Injection Well No Violations 3 line has been repaired. The line was cut and a new section of line was installed. Violation is resolved.
1648071760 2011-08-22 Salt Water Injection Well No Violations Wellhead has been excavated around and is full of water (18 deep). Storm event with in last 24 hours of inspection. Annulus at 270 psi, injection at 270 psi. Called Jess Hess. Jess came to well site and tested the Annulus at 775 psi for 15 minutes. After 15 minutes 770 psi. Test passed.
165933288 2016-12-21 0:00 SW No Violations 2.90
1659343750 2009-06-15 Salt Water Injection Well No Violations An inspection revealed no violations at this time.
1720426544 2008-09-16 Salt Water Injection Well No Violations No violations were noted.
1724926489 2019-01-29 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure, and annulus pressure. The injection pump is manifolded to pump to the Ahmed/Ellis and to the Beckley. The injection line valve to the Ahmed/ Ellis is closed. I called Mike McPeak to inquire about the injection line valve to Ellis being shut. Mike stated that they are pumping to the Beckley facility today.
1728796398 2017-05-30 Salt Water Injection Well No Violations Salt water injection well inspection. The injection pressure was 330 PSI, the annulus pressure was 320 PSI. No violations noted.
1734127772 2008-02-11 Salt Water Injection Well No Violations No violations were noted.
1743958642 2015-08-10 Surface Facility Construction No Violations Accompanied UIC Geologist on inspection of the containment dike.
178139816 2006-7-12 0:00: SW No Violations
1786657306 2017-12-11 Salt Water Injection Well No Violations My inspection revealed the salt water injection well had 210 psi on the annulus and 350 psi on the injection tubing. The containment dike was relatively free of fluids. Legible identification was posted.
1861115487 2020-5-7 0:00:0 SW No Violations 4.50
1888553662 2007-11-05 Salt Water Injection Well No Violations No violations were noted.
1907233193 2005-01-12 Salt Water Injection Well No Violations No violations.
1909499080 2019-8-26 0:00: SW No Violations 2.00
1926685103 2017-06-08 Salt Water Injection Well No Violations Inspection with Eric Conrad, findings match Inspectors prior report.
1980417309 2011-11-02 Salt Water Injection Well No Violations Good vegetative cover established.
1981311621 2004-01-15 Salt Water Injection Well Violations Noted An insection of the well and tank battery revealed oil and oily gravel in dike around storage tanks.
2000246827 2004-03-04 Salt Water Injection Well No Violations Follow-up on NOV, In-Complaince.
2024948160 2018-05-15 Salt Water Injection Well No Violations Inspected the unloading pad, containment dike, tanks, injection pump, injection pressure and annulus pressure. Identification is posted. The containment dike is free of fluids.
2042730676 2013-11-04 Salt Water Injection Well No Violations Inspected unloading pad, containment dike, tanks, injection pump, injection line, annulus pressure, and injection pressure. Identification is posted at the wellhead and containment dike. Dike is free of water.
2082491979 2006-09-25 Salt Water Injection Well No Violations A follow-up inspection was conducted at the facility owned by Bancequity Petroleum Corp., on 9/25/2006. During the inspection, it was noted that the leaking fitting has not been replaced and the oily soil has not been removed.
2130214539 2010-06-22 Salt Water Injection Well No Violations An inspection revealed no violations.
261933827 2012-4-19 0:00: SC No Violations 3.00
273491706 2007-4-19 0:00: SW No Violations
342075127 2009-3-2 0:00:0 SW No Violations
358201034 2018-7-16 0:00: SW No Violations 1.10
387007605 2013-5-15 0:00: SW No Violations 6.00
434413212 2006-11-13 0:00 SW No Violations
438417582 2013-3-28 0:00: SW No Violations 2.50
494985850 2015-8-11 0:00: SW No Violations 2.50
53954508 2016-2-23 0:00: SW No Violations 1.50
5609i209 2001-6-1 0:00:0 SW No Violations
594801966 2009-12-9 0:00: SW No Violations
706858123 2011-11-2 0:00: SW No Violations 1.00
725217064 2008-12-16 0:00 SW No Violations
769040020 2007-7-3 0:00:0 SW No Violations
832084189 2014-10-2 0:00: SW No Violations 3.00
952107953 2008-5-27 0:00: SW No Violations
959117696 2006-11-3 0:00: AM No Violations
iTOMK00010 2001-01-18 Salt Water Injection Well Violations Noted
iTOMK000101 2001-1-18 0:00: SW No Violations
PL2239 PL No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0001269i12 US-OH-107286 2001-01-19 Failure to perform Mechanical Integrity Test
001269i852 US-OH-107486 2002-03-06 Equipment pressure rated below operating pressure
001269i852 US-OH-107487 2002-03-06 No SPCC dike/or failure to keep dike free of water or oil
001269i852 US-OH-107488 2002-03-06 Contamination at surface facility (permit after 6-1-82)
0178139816 US-OH-117740 2006-07-24 Violation of injection tubing/fitting requirements
0178139816 US-OH-117741 2006-07-24 Contamination at surface facility (permit after 6-1-82)
0438417582 US-OH-124721 2013-04-05 Contamination at surface facility (permit after 6-1-82)
0513402976 US-OH-125604 2019-05-09 Failure to file salt water injection annual report
1456437349 US-OH-113220 2016-03-03 Pollution/Contamination
1981311621 US-OH-120045 2004-01-20 Contamination at surface facility (permit after 6-1-82)
iTOMK00010 US-OH-131643 Failure to perform Mechanical Integrity Test

For data sources see[9]

References