X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-133-23614

Well Details

Well ID: 34-133-23614
Loading map...
Country: United States
State: Ohio
County: Portage
Municipality: Brimfield Township
Operator Name: DUCK CREEK ENERGY INC
Well Pad ID:
Farm/Lease Name: PLUM CREEK
License Status: Active Injection
License Date: 1987-08-21
Spud Date: 1987-10-06
Spud Drilling Contractor: CUBBY DRLG
Final Drill Date: 1987-10-09
Well Total Depth: 4050.00 ft
Configuration: Vertical
Latitude: 41.100000
Longitude: -81.350000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1987-08-21 385 TORENT OIL & GAS CO GeoDate 8/21/87
Conversion to Injector 1987-08-21
Salt Water Injection Well 1987-08-21 Issued Date 8/21/87 Expired Date 8/20/88 Acres 0002000 Tool Type RTA Proposed Formation NEWBURG Proposed Depth 04029 Proposed Drill Depth 04029
Storage Well 1987-08-21 Issued Date 8/21/87 Expired Date 8/20/88 Acres 0002000 Tool Type RTA Proposed Formation NEWBURG Proposed Depth 04029 Proposed Drill Depth 04029
Original Spud 1987-10-06 PERMIT EXPIRED.
Completed 1987-10-09 PERMIT EXPIRED.
Reached Total Depth 1987-10-09 PERMIT EXPIRED.
First Injection 1987-11-24 PERMIT EXPIRED.
Construction Permit Expires 1988-08-20 PERMIT EXPIRED.
Completion Report Received 1990-04-11 PERMIT EXPIRED.
CO 1992-03-05 1258 PANDER RAY TRUCKING INC GeoDate 8/21/87
Annulus Pressure Monitoring Approved 1994-04-26 PERMIT EXPIRED.
Last Compliance Report 2001-12-07 PERMIT EXPIRED.
Change of Owner 2013-07-23 Operator changed from 1258, PANDER RAY TRUCKING INC to 8981, HECKMAN WATER RES(CVR)INC. O&G
Record Last Modified 2017-10-19 PERMIT EXPIRED.

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2000-05-05 3795 3880 1
3795 3880 1
3795 3880 1

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
ACID 15 5200 Gal 0 3000 GALLONS OF 15% ACID AND 2200 GALLONS OF WATER

For data sources see[4]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1004404213 2019-4-22 0:00: SW No Violations 1.00
-1006816334 2016-8-22 0:00: SW No Violations
-1027196725 2017-2-1 0:00:0 SW No Violations
-1048891859 2010-12-16 0:00 SW No Violations
-1053539516 2019-7-12 0:00: SW No Violations
-112241534 2009-8-19 0:00: SW No Violations
-1140843101 2010-2-16 0:00: SW No Violations
-1188813984 2006-5-3 0:00:0 SW No Violations
-1207113919 2007-5-14 0:00: SW No Violations
-1229566074 2006-2-8 0:00:0 SW No Violations
-1246444897 2012-12-19 0:00 SW No Violations
-1252044596 2007-8-24 0:00: SW No Violations
-1291640453 2012-11-1 0:00: SW No Violations
-1326994723 2019-1-15 0:00: SW No Violations 1.00
-1337326906 2012-8-16 0:00: SW No Violations
-1340503419 2020-8-13 0:00: SW No Violations 1.50
-1350632747 2013-11-20 0:00 SW No Violations
-1387849805 2013-9-3 0:00:0 SW No Violations
-1417692863 2020-2-4 0:00:0 SW No Violations 1.10
-1422073736 2017-1-13 0:00: SW No Violations
-1535445549 2008-11-18 0:00 SW No Violations
-154205112 2007-2-12 0:00: SW No Violations
-1566431563 2014-8-15 0:00: SW No Violations
-1567705905 2015-1-12 0:00: SW No Violations
-1583010141 2009-11-19 0:00 SW No Violations
-1621016030 2003-2-28 0:00: SW No Violations
-1664262503 2019-6-24 0:00: SW No Violations
-1710782553 2010-8-24 0:00: SW No Violations
-1785547444 2014-5-22 0:00: SW No Violations
-1853584109 2006-7-22 0:00: SW No Violations
-1978642756 2020-6-12 0:00: SW No Violations 1.00
-2018387676 2015-12-30 0:00 SW No Violations
-2029460244 2018-2-13 0:00: SW No Violations 0.70
-2067573564 2014-11-24 0:00 SW No Violations
-244293268 2014-6-4 0:00:0 SW No Violations
-265559582 2004-11-18 0:00 SW No Violations
-277579850 2003-10-3 0:00: SW No Violations
-310755552 2016-7-25 0:00: SW No Violations
-318680222 2016-9-7 0:00:0 SW No Violations
-33243698 2009-3-20 0:00: SW No Violations
-353724650 2003-9-3 0:00:0 SW No Violations
-362248018 2005-6-1 0:00:0 SW No Violations
-422238234 2005-8-25 0:00: SW No Violations
-433447773 2010-8-17 0:00: SW No Violations
-458804002 2013-12-27 0:00 SW No Violations
-574805034 2014-5-7 0:00:0 SW No Violations
-604496479 2016-3-10 0:00: SW No Violations
-637314486 2014-6-19 0:00: SW No Violations
-663199401 2012-3-6 0:00:0 SW No Violations
-681863459 2016-7-7 0:00:0 SW No Violations
-682073966 2008-5-12 0:00: SW No Violations
-687040337 2004-2-11 0:00: SW No Violations
-71014784 2004-8-10 0:00: SW No Violations
-743293211 2015-3-2 0:00:0 SW No Violations
-752766192 2015-5-6 0:00:0 SW No Violations
-759996439 2015-9-28 0:00: SW No Violations
-796359438 2009-6-10 0:00: SW No Violations
-806253113 2011-8-3 0:00:0 SW No Violations
-83764055 2009-2-24 0:00: SW No Violations
-902973724 2013-10-9 0:00: SW No Violations
0000PL5850 Preliminary Restoration No Violations Preliminary Restoration done information from Data Point
0001216i14 2001-08-21 Salt Water Injection Well No Violations Inspection this date revealed no violations. Last inspection date: 05-02-2001
0002154i47 2002-02-25 Salt Water Injection Well No Violations Well not running the day of the inspection. No Violations.
000UIC1105 1991-05-30 Salt Water Injection Well No Violations 1509.03 RULES & REG. ENFORCE
000UIC1106 1991-05-30 Salt Water Injection Well No Violations 1501:9-1-07 CONTAM. & POLLUTION
000UIC1107 1991-05-30 Salt Water Injection Well No Violations 1501:9-03-05 (A) (6)
000UIC1215 1991-12-17 Salt Water Injection Well No Violations 1509.03 RULES & REGULATIONS
000UIC1701 1998-02-03 Salt Water Injection Well No Violations 1501: 9-3-07 (D) EXCEEDED MAX.INJ PSI
000UIC1702 1998-02-03 Salt Water Injection Well No Violations 1509.03 EXCEED MAX.INJ PSI
000UIC1707 1997-12-09 Salt Water Injection Well No Violations 1501: 9-3-07 (D) EXCEED MAX INJ PSI
001216i108 2001-11-28 Salt Water Injection Well No Violations Arrived on site as the well was shut down. Pressures on the tubing and annulus are equal. Discussed with the well tender. Waited twenty minutes then turned the pump back on. Pressres went from 760psi to 820psi on both. Told the tender to shut down and determine the cause before injecting again. The tender called in to the office once to notify Ray or Allen, then again to vedrify that they were contacted. THE COMPUTER PROGRAM WILL NOT PERMIT THE ADDITION OF THE CODES VIOLATED. 1509.03 AND OAC 1501:9-3-
0013079107 2002-04-24 Salt Water Injection Well No Violations Well was not running at time of inspection. NO VIOLATIONS.
002154i188 2002-05-30 Salt Water Injection Well No Violations Water in tank battery is gone. Crude oil staining exists inside tank battery dike at previous water line.
002154i239 2002-06-24 Salt Water Injection Well Violations Noted 4-29-02 Called Pander Trucking and informed them that there was crude oil on the water within the tank battery dike and requested it to be cleaned up. 5-28-02 Water in the tank battery dike was gone, but there was crude staining on the soil within the tank battery dike. 6-24-02 System was not running. Crude oil was floating on the water within the tank battery dike and the soil staining was still present. The dike area needs to be cleaned up. Ray Pander Trucking 330-654-2500.
002154i310 2002-07-23 Salt Water Injection Well Violations Noted Tank battery dike has not been cleaned up. System was not running.
002154i382 2002-08-20 Salt Water Injection Well No Violations N.O.V. RESOLVED. System was not running. NO VIOLATIONS.
002154i536 2002-10-28 Salt Water Injection Well Violations Noted Injection well was running at the time of the inspection. Injection pressure was 920 PSI. This exceeded the allowable injection pressure of 850 PSI. The well was immediately shut down at the Inspectors request by the operator (Jeff) at the site. Inspector Claus informed Pander Trucking (Alan) of the violation.
0033243698 2009-03-20 Salt Water Injection Well No Violations The valve on the 8-5/8 annulus has been replaced, as requested.
0063347918 2004-08-26 Salt Water Injection Well Violations Noted The violation has been corrected
0071014784 2004-08-10 Salt Water Injection Well Violations Noted Status check inspection - one of the brine tanks had been overfilled and impacted the tank battery. Both free oil and brine were still present on the dike floor. I contacted Ray Pander and informed him of the violation. A new check valve had been installed and did not have a needle valve to check the injection pressure.
0083764055 2009-02-24 Salt Water Injection Well No Violations Status check inspection found no violations at this time. I called Pander and requested that they change the 2 ball valve on the annulus. I could not open it to check annular pressure.
0112241534 2009-08-19 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
0154205112 2007-02-12 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
0164765471 2008-02-25 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. On Monday March 3, Producers Services is scheduled to inject 3000 gallons of 15% acid to try and open up the perforations and reduce the overall injection pressures.
0221457196 2017-03-30 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0244293268 2014-06-04 Salt Water Injection Well No Violations There were no violations at the time of inspection.
0265559582 2004-11-18 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
0277579850 2003-10-03 Salt Water Injection Well No Violations Follow up UIC inspection to check pressures and to confirm that the valve on the injection side had been replaced. No violations at this time.
0310755552 2016-07-25 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0318680222 2016-09-07 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0353724650 2003-09-03 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
0362248018 2005-06-01 Salt Water Injection Well No Violations Status check inspection for this salt water disposal well. No violations at this time.
0375283723 2012-12-10 Salt Water Injection Well No Violations The well owner performed a mechanical integrity test on the well. My inspection of the injection well found no violations.
0422238234 2005-08-25 Salt Water Injection Well No Violations Status check inspection - no violations at this time.
0433447773 2010-08-17 Salt Water Injection Well No Violations The quarterly status check inspection found a discrepency between the wellhead pressure gauge and the gauge on the injection pump. I asked Pander to replace the pressure gauge on the wellhead and place a tapped bull plug and needle valve for the MRM gauge off of the wellhead. I will check the pressures after this request has been honored.
0458804002 2013-12-27 Salt Water Injection Well No Violations No violations were found at the time of inspection.
0468476655 2013-06-17 Salt Water Injection Well No Violations My inspection of the well and surface facility found no violations.
0468984903 2016-11-29 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time.
0485125670 2005-12-01 Salt Water Injection Well No Violations Status check inspection of this salt water injection well. No violations at this time.
0507242629 2011-02-24 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. Injection pressures remain at the maximum allowable limits.
0574142539 2006-07-05 Salt Water Injection Well No Violations J-Well is on site to replace the tubing string and the packer in this well. No violations at this time.
0574805034 2014-05-07 Salt Water Injection Well No Violations There were no violations found at the time of inspection.
0604496479 2016-03-10 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0637314486 2014-06-19 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
0644171734 2007-12-03 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
0663199401 2012-03-06 Salt Water Injection Well Violations Noted The injection pressure was exceeding the maximum allowed. The well owner shut down immediately.
0676108043 2001-11-28 Salt Water Injection Well No Violations FOLLOW UP TO NOV # 1216i108 Arrived on site as the well was shut down. Pressures on the tubing and annulus are equal. Discussed with the well tender. Waited twenty minutes then turned the pump back on. Pressres went from 760psi to 820psi on both. Told the tender to shut down and de
0681863459 2016-07-07 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0682073966 2008-05-12 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
0687040337 2004-02-11 Salt Water Injection Well No Violations Status check inspection - no violations at this time. 790# injection and 900# annulus.
0743293211 2015-03-02 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0749327128 2012-03-08 Salt Water Injection Well No Violations My inspection of this well site found thet the pressure on the tubing was zero, the pump was shut off and the gate was locked.
0752766192 2015-05-06 Salt Water Injection Well No Violations The well and surface facility were inspected. There were no violations found at the time of inspection.
0755412349 2018-03-30 Salt Water Injection Well No Violations I was on location to inspect the UIC well and facility. I found the well not operating on the day of my inspection. The gate valve on the tubing is in the closed position. I found no spills or leaks. The proper identification signs are posted at the facility and well. There are no violations at this time.
0759996439 2015-09-28 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
0796359438 2009-06-10 Salt Water Injection Well No Violations The tubing is out of the hole and they are waiting for a service rig to swab the well. Pander is still trying to improve the injection characteristics of this well. A MIT will be completed after the tubing and packer are placed back in the hole.
0806253113 2011-08-03 Salt Water Injection Well No Violations I performed the quarterly UIC test on the annulus and the injection. The well was running and the maximum pressure was exceeded by 90psi. I had the well shut in.
0834421028 2013-03-08 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations. The pump was off at the time.
0902973724 2013-10-09 Salt Water Injection Well No Violations No violations were found at the time of inspection.
0918916743 2009-07-07 Salt Water Injection Well No Violations Hagen Well Service is on site to reset the packer and conduct the mechanocal intregity test. Both are scheduled for 7/8 at approximately 9:00 am.
0919801833 2014-10-23 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The front gate was closed. There were no violations found at the time.
0930737399 2017-10-26 Salt Water Injection Well No Violations
0932523482 2012-07-18 Salt Water Injection Well No Violations My inspection of the well site and injection facility found no violations. The pump was off at the time.
0979546307 2011-11-01 Salt Water Injection Well No Violations I performed the quarterly UIC test on the annulus and the injection. The well was not running. There were no violations at this time.
1006816334 2016-08-22 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1027196725 2017-02-01 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations at the time.
1048891859 2010-12-16 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. Injection pressure at the wellhead (970 psi) exceeded the allowable (850 psi) and the company shut the injection pump down. The pressure gauge at the injection pump indicated a pressure closer to 900 psi. The well reportedly is on vacuum at the start of the day and quickly builds to the maximum allowable injection pressure. The pressures need to be checked more often.
1093672158 2011-05-17 Salt Water Injection Well No Violations Quarterly status check inspection found that the permitted maximum injection pressure (850 psi) had been exceeded and the well was injecting at 1080 psi. I ordered the well shut in and the injection pump shut down. I also advised Ray Pander that if the higher injection pressures are due to injecting fresher water, he may consider applying for a fluid density modification to permit a higher injection pressure. I also advised him that additional reporting and monitoring requirements will apply if he chooses to pursue this modification.
1111441938 2004-05-04 Salt Water Injection Well No Violations Status check inspection of this salt water disposal well. No violations at this time.
1140843101 2010-02-16 Salt Water Injection Well No Violations Quarterly status check inspection found the injection pressure exceeded the maximum allowable of 850 psi by 90 psi. I directed the on site operator to shut the system down and monitor the injection pressures more often to avoid any excess values. According to the operator, the well starts on vacuum and pressures slowly build during the injection day.
1152534634 2006-07-08 Salt Water Injection Well No Violations Pander changed out the tubing string and replaced the packer in this well. The new tubing string is 2-3/8 upset and the packer is a rebuilt Arrow Lockset. Mixed five gallons of inhibitor in 80 bbl of fresh water and circulated to surface. The new packer was set in compression at 3738. After setting the packer, pressured up the annulus to 1050 psi and held for 15 minutes. The test passed.
1152798167 2006-07-10 Salt Water Injection Well No Violations The injection system has been re-connected and started. So far injection pressures have been high. I reminded the driver on site that the maximum injection pressure is 850 psi.
1154391870 2006-07-25 Salt Water Injection Well No Violations The MIT was successfully completed on 7/22 and the well is now back in use. The injection pressures are near 800 psi and the annular pressure is 150 psi.
1175425317 2020-5-15 0:00: SW No Violations 1.00
1179624836 2018-05-01 Salt Water Injection Well No Violations I was on location for an UIC facility inspection. I found no evidence of recent activity. The injection well was not in operation on the day of my inspection. The gate valve on the tubing is closed. Fencing around the well and facility is secure with locks. Identification signs are posted. There are no violations at this time.
1188813984 2006-05-03 Salt Water Injection Well No Violations Status check inspection found no violations at this time. I did call Pander and asked them to either re-paint or replace the ID sign.
1207113919 2007-05-14 Salt Water Injection Well No Violations When the well was inspected on May 9, the company gauge on the injection side could not be removed and indicated that the injection pressure was 1000 psi. The maximum approved injection pressure is 850 psi. I notified Pander of the problem. On May 14, the injection pressure was 820 psi and the company gauge had been replaced.
1216i108 2001-11-28 0:00 SW No Violations 2.00
1216i14 2001-8-21 0:00: SW No Violations 1.00
1220536557 2008-08-14 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. The well continues to operate at the maximum allowable injection pressure.
1221795349 2006-12-07 Salt Water Injection Well No Violations Quarterly inspection of this salt water disposal well found no violations at this time.
1229566074 2006-02-08 Salt Water Injection Well No Violations Status check inspection for this salt water disposal well. No violations at this time.
1231266086 2014-05-21 Salt Water Injection Well Violations Noted The well owner reported an injection line leak. An inspection found a brine impacted area approximately 50 feet by 100 feet. A trench was cut down slope from the injection line and wellhead. The area was flushed with fresh water and the run off was collected in the trench, which was lined with plastic.
1234072880 2003-06-17 Salt Water Injection Well No Violations UIC status check inspection - no violations at this time.
1243433047 2009-05-26 Salt Water Injection Well No Violations J-Wells service rig pulled the tubing and packer. I met with R.C. Pander on the site and discussed the well. The injection well is shut down until it can be treated on June 4th or 5th. I called Bob Worstall and informed him of the schedule change.
1246444897 2012-12-19 Salt Water Injection Well No Violations My inspection of the injection facility found no violations. I took a water sample from a brine hauler.
1247599445 2009-07-08 Salt Water Injection Well No Violations Pander removed the tubing string and packer from this well in order to treat the well for bacteria, crude oil and parafin. The tubing was out of the hole for approximately seven weeks while various treatment proposals were evaluated. The well was ultimately treated with bacteriacide and Salty Dog in an attempt to lower injection pressures. On 7/8 Hagen Well Service ran 117 joints of 2-3/8 tubing and two pup joints with a Weatherford Arrow Lockset packer (3692) back in this injection well. Five gallons of inhibitor was mixed with 80 bbl of fresh water. 60 bbl of this mixture was pumped down the annulus between the tubing and the 4-1/2 production casing. The packer was then set in compression. The MIT was completed with an initial pressure of 1015 psi, five minute pressure of 1015 psi, ten minute pressure of 1015 psi and fifteen minute pressure of 1005 psi. After passing the MIT, the annular pressure was manually lowered to 200 psi. The rig was released and moved off location. On 7/9, the annular pressure was 0 psi and the well was on vacuum. As Pander starting injecting, the annular pressure increased to 300 psi and the injection pressure increased to approximately 800 psi. On 7/10, both the annulus and the tubing were on vacuum. Operations were terminated pending evaluation. On 7/14, Moore Well Service rig was on site to correct the pressure leak. While tightening the tubing string by rotation, the packer unseated and another MIT was completed. The initial pressure was 1020 psi, five minute pressure of 1015 psi, ten minute pressure of 1015 psi and fifteen minute pressure of 1015 psi. The second MIT passed.
1252044596 2007-08-24 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time. I spoke with the onsite operator about the maximum injection pressures allowed for this well. He said that pressures have been higher than usual lately and that Pander may be planning to acidize the well.
1291640453 2012-11-01 Salt Water Injection Well No Violations My inspection of the injection facility and well found no violations.
13079107 2002-4-24 0:00: SW No Violations 0.50
1326994723 2019-01-15 Salt Water Injection Well No Violations I was on location to assess Compliance Notice #1543841792. I found evidence of recent activity. Storage tanks have been moved. The stairs and catwalk have been disconnected and are sitting next to the diked tank battery. The injection well was shut-in with a closed gate valve on the injection tubing. There are locked chain link fences around the injection well and facility. Identification signs are posted.
1337326906 2012-08-16 Salt Water Injection Well No Violations My inspection of the well site and injection facility found no violations.
1345574831 2012-07-26 Salt Water Injection Well No Violations My inspection of the well site and injection facility found no violations. The pump was off at the time.
1350632747 2013-11-20 Salt Water Injection Well No Violations No violations were found at the time of inspection.
1387849805 2013-09-03 Salt Water Injection Well No Violations My inspection of the well and injection facility found no violations.
1405359860 2014-05-19 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1418969246 2014-07-17 Salt Water Injection Well No Violations No violations were found at the time of inspection.
1422073736 2017-01-13 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
1463411838 2016-05-16 Salt Water Injection Well No Violations I conducted a quarterly status check inspection of this active injection well and the associated surface facilities. The pump was not currently running and a gauge on the injection tubing indicated 0psi. I gauged the annulus between the 4.5 casing and injection tubing and found the annulus pressured at 885psi. I found no violations at this time.
1484940437 2017-01-20 Salt Water Injection Well No Violations At the time, a truck load of rainwater was removed from the unloading pad sump and containment dike area. There were no violations found at the time.
1506088590 2004-08-20 Salt Water Injection Well Violations Noted Spill clean-up is beginning by flooding the dike with hot water and steam washing the stone.
1507861098 2020-4-13 0:00: SW No Violations 0.70
1509501906 2014-09-05 Salt Water Injection Well Violations Noted An inspection found the injection pressure exceeding the maximum allowed. The well tender was instructed to shut down for the day.
1514471179 2017-12-28 Salt Water Injection Well No Violations I found the injection and facility in good repair on the day of my inspection. At this time, the well is shut-in with a closed gate valve on the injection tubing. The facility is secure with a locked gate. I observed no leaks or spills. An identification sign is posted at the facility and well. There are no violations at this time.
1532451910 2017-05-22 Salt Water Injection Well No Violations The injection well and surface facility were inspected. The access gate to the facility and the fence around the well were both locked. There was no one onsite at the time. The well was found shut-in. The tanks and lines had no visible leaks. There was no sign of recent activity.
1534505191 2018-08-16 Salt Water Injection Well No Violations I found the injection well still shut-in with a closed gate valve on the injection tubing. Locked chain link fencing surrounds the facility and well. Identification signs are posted at the access road entrance and well. I observed no leaks or spills. The office is secure and locked. There are overgrown vegetation surrounding the well and throughout the facility.
1534636428 2012-06-15 Salt Water Injection Well No Violations The injection system was not running at the time of the inspection. My inspection found no violations at the wellhead or at the brine tank battery.
1535445549 2008-11-18 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1535725374 2018-08-31 Salt Water Injection Well No Violations

Start: 970 psi 5 minutes: 970 psi 15 minutes: 970 psi

There was no pressure drop over the entire test. Test passed.

1540388325 2018-10-17 Salt Water Injection Well No Violations I found the injection well shut-in with a closed gate valve on the tubing. I observed not leaks or spills. There are a few inches of rain water in the diked tank battery. The fencing around the well and the facility are locked. Identification signs are posted.
1542035898 2014-08-01 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations.
1542742572 2018-11-20 Salt Water Injection Well No Violations I found the injection well shut-in with a closed gate valve on the injection tubing. The fencing around the well and facility have chains and locks. Identification signs are posted. There are a few inches of water in the diked tank battery. I observed no spills or leaks.
1543841792 2018-12-03 Salt Water Injection Well Violations Noted

-308-0007 within 30 days. Once the remedial action plan is approved, restoration work shall commence under the supervision of the Division within 30 day from the approved remedial action plan.

1551361923 2019-02-27 Salt Water Injection Well No Violations I was on location to assess Compliance Notice #1543841792. I found John McCollums from PVE on site to begin the Site Assessment Work along with Rob Bealko from Nuverra. A track-mounted Geoprobe unit from Allprobe Environmental Inc. completed seven (7) soil borings (PTB 13-
1551455185 2019-02-28 Salt Water Injection Well No Violations I was on location to assess Compliance Notice #1543841792. I witnessed PVE and the track-mounted Geoprobe unit from Allprobe Environmental completed five (5) soil borings (PTB 21-25). PVE completed soil bore PTB 20 yesterday evening.
1553091762 2019-03-20 Salt Water Injection Well No Violations I was on location to assess Compliance Notice #1543841792. I found the injection well still shut-in with a closed gate valve. The fencing around the injection well and the fencing for the facility are locked. Identification signs are posted.
1565115596 2019-8-6 0:00:0 SW No Violations 1.00
1566431563 2014-08-15 Salt Water Injection Well No Violations There was no one onsite and the gate was shut. No violations found.
1567705905 2015-01-12 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1568291568 2019-9-12 0:00: SW No Violations 1.20
1571677395 2019-10-21 0:00 SW No Violations 1.80
1576681754 2019-12-18 0:00 SW No Violations 2.20
1583010141 2009-11-19 Salt Water Injection Well No Violations Quarterly status check inspection found no violations at this time.
1591558915 2017-09-19 Salt Water Injection Well No Violations I conducted a quarterly status check inspection of this salt water injection well. The 2.375 tubing gate valve is closed and there is no injection pressure on the tubing. A gauge on the 4.5 casing port indicates an annular pressure of 600psi. The wellhead is fenced and locked and the required ID is posted at the wellhead. I inspected the facility and the front gate is locked. The office is locked and the injection pump is not operating at this time. The tank battery is diked and contains: five (5) 210 barrel tanks, three (3) 400 barrel tanks, one (1) 140 barrel oil skim tank, and one (1) 300 barrel frac (slop) tank. I ran a high range Quantab in standing water in the middle of the tanks and the Quantab units were less than one unit and below the detection limit of 2.2 units (286ppm chlorides). I found no violations at this time.
1621016030 2003-02-28 Salt Water Injection Well Violations Noted Status check inspection of salt water injection well. The system was not running during the inspection. No violations at this time.
162102868 2020-7-6 0:00:0 SW No Violations 1.50
1640620463 2007-05-09 Salt Water Injection Well No Violations Quarterly status check found that the injection pressure (1000 psi) exceeds the maximum allowable of 850 psi. I could not remove Panders gauge to verify the pressure using the MRM gauge. The injection pressure therefore was obtained from their gauge. I contacted Pander and requested that they shut the system down until the injection pressure is controlled and the accuracy of the gauge is verified.
164765471 2008-2-25 0:00: SW No Violations
1710782553 2010-08-24 Salt Water Injection Well No Violations The requested changes were made to the wellhead and the injection pressure was recorded.
1785547444 2014-05-22 Salt Water Injection Well No Violations A mechanical integrity test was performed on the new injection line. The injection line held 980 psi. for 15 minutes without any loss. The soil remediation was completed and the area was graded.
1792630664 2015-01-23 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
1804986150 2014-03-21 Salt Water Injection Well No Violations Pressure readings were taken, while the pump was operating. There were no violations at the time of inspection.
1853584109 2006-07-22 Salt Water Injection Well No Violations Pander removed the packer that was set two weeks ago after there were indications that it was failing during brine injection. The packer had been set in compression and passed the MIT performed on July 8. Pander again ran a rebuilt Arrow Lockset packer in compression. The packer was set at 3712. The MIT was condudcted at 940 psi with no loss of pressure after 15 minutes. The test passed.
1868904508 2005-02-25 Salt Water Injection Well No Violations Status check inspection of this salt water disposal well and storage system. No violations at this time.
1871500573 2014-09-19 Salt Water Injection Well No Violations An inspection of the well and injection facility found no violations. The facility was closed at the time.
2018387676 2015-12-30 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations. The pump was off and the tubing pressure was falling.
2026418893 2010-05-05 Salt Water Injection Well No Violations Quarterly status check inspection found no violaitons at this time.
202830586 2020-1-9 0:00:0 SW No Violations 1.50
2029460244 2018-02-13 Salt Water Injection Well No Violations I was on location to inspect the UIC well and facility. I found the well not operating on the day of my inspection. The gate valve on the tubing is in the closed position. I found no spills or leaks. The proper identification signs are posted at the facility and well. There are no violations at this time.
2034757622 2014-04-18 Salt Water Injection Well No Violations The pump was shut off approximately half an hour prior to inspection. There were no violations at the time.
2045054076 2002-11-13 Salt Water Injection Well Violations Noted Injection pressure 150 PSI. System was not running. System needs to be checked when running to resolve N.O.V.
2067573564 2014-11-24 Salt Water Injection Well No Violations The injection well and surface facility were inspected. There were no violations found at the time.
2070599705 2016-10-25 Salt Water Injection Well No Violations An inspection of the injection well and surface facility found no violations.
2078945523 2019-02-21 Salt Water Injection Well No Violations I was on location to meet with Rob Bealko from Nuverra and ODNR Scott Scheiner and ODNR Tammy Richard and to assess Compliance Notice #1543841792. I found the injection well still shut-in with a closed gate valve. The chain link fences around the injection well and facility were locked. Identification signs are posted. The meeting was to discuss the Site Assessment Work Plan. The site assess plan will be commencing within the next two to three weeks.
2132875933 2017-11-28 Salt Water Injection Well No Violations
2135549648 2002-10-28 Salt Water Injection Well Violations Noted FOLLOW UP TO NOV # 2154i536 Injection well was running at the time of the inspection. Injection pressure was 920 PSI. This exceeded the allowable injection pressure of 850 PSI. The well was immediately shut down at the Inspectors request by the operator (Jeff) at the site. Inspect
2154i188 2002-5-30 0:00: SW No Violations 1.00
2154i239 2002-6-24 0:00: SW No Violations 1.00
2154i310 2002-7-23 0:00: SW No Violations 1.00
2154i382 2002-8-20 0:00: SW No Violations 1.00
2154i47 2002-2-25 0:00: SW No Violations 1.00
2154i536 2002-10-28 0:00 SW No Violations 1.50
221457196 2017-3-30 0:00: SW No Violations
375283723 2012-12-10 0:00 SW No Violations
468476655 2013-6-17 0:00: SW No Violations
468984903 2016-11-29 0:00 SW No Violations
485125670 2005-12-1 0:00: SW No Violations
507242629 2011-2-24 0:00: SW No Violations
526793154 2019-6-3 0:00:0 SW No Violations 1.50
574142539 2006-7-5 0:00:0 SW No Violations
63347918 2004-8-26 0:00: SW No Violations
644171734 2007-12-3 0:00: SW No Violations
676108043 2001-11-28 0:00 SW No Violations 2.00
749327128 2012-3-8 0:00:0 SW No Violations
755412349 2018-3-30 0:00: SW No Violations 1.00
834421028 2013-3-8 0:00:0 SW No Violations
918916743 2009-7-7 0:00:0 SW No Violations
919801833 2014-10-23 0:00 SW No Violations
930737399 2017-10-26 0:00 SW No Violations 1.00
932523482 2012-7-18 0:00: SW No Violations
955910011 2019-11-13 0:00 SW No Violations 1.50
979546307 2011-11-1 0:00: SW No Violations
iTOMK00007 1999-05-27 Salt Water Injection Well No Violations
iTOMK000078 1999-5-27 0:00: SW No Violations
PL5850 PL No Violations
UIC1105 1991-5-30 0:00: SW No Violations
UIC1106 1991-5-30 0:00: SW No Violations
UIC1107 1991-5-30 0:00: SW No Violations
UIC1215 1991-12-17 0:00 SW No Violations
UIC1701 1998-2-3 0:00:0 SW No Violations
UIC1702 1998-2-3 0:00:0 SW No Violations
UIC1707 1997-12-9 0:00: SW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
002154i239 US-OH-122075 2002-06-26 Pollution/Contamination
002154i310 US-OH-122089 2002-07-24 Pollution/Contamination
002154i536 US-OH-122118 2002-10-28 Violation of injection tubing/fitting requirements
0063347918 US-OH-127191 2004-08-17 Pollution/Contamination
0071014784 US-OH-127931 2004-08-17 Pollution/Contamination
0663199401 US-OH-127507 2012-04-06 Exceeding maximum allowable injection pressure
1231266086 US-OH-106217 2014-07-24 Pollution/Contamination
1506088590 US-OH-114200 2004-08-17 Pollution/Contamination
1509501906 US-OH-114273 2014-10-06 Exceeding maximum allowable injection pressure
1543841792 US-OH-114958 2018-12-05 9-3-04(A) Pollution/Contamination
1621016030 US-OH-115930 2002-11-14 Violation of injection tubing/fitting requirements
2045054076 US-OH-120816 2002-11-14 Violation of injection tubing/fitting requirements
2135549648 US-OH-121887 2002-11-14 Violation of injection tubing/fitting requirements

For data sources see[5]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-133-23614&oldid=14300952"