X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-067-20319

Well Details

Well ID: 34-067-20319
Loading map...
Country: United States
State: Ohio
County: Harrison
Municipality: Washington Township
Operator Name: BARDALL RICHARD & MARY
Well Pad ID:
Farm/Lease Name: BARDALL
License Status: Final Restoration
License Date: 2014-01-22
Spud Date: 1977-01-06
Spud Drilling Contractor:
Final Drill Date: 1977-01-15
Well Total Depth: 5897.00 ft
Configuration: Vertical
Latitude: 40.250000
Longitude: -81.320000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1976-12-08 140 KST OIL & GAS CO INC GeoDate 12/8/76
Original Spud 1977-01-06 QUAD=CAMBRIDGE, GL=990.2
Completed 1977-01-15 QUAD=CAMBRIDGE, GL=990.2
Reached Total Depth 1977-01-15 QUAD=CAMBRIDGE, GL=990.2
CO 1995-12-05 182 BELDEN & BLAKE CO GeoDate 12/8/76
Change of Owner 1999-09-27 Operator changed from 182, BELDEN & BLAKE CORPORATION to 5601, MOORE WELL SERVICES INC
Change of Owner 2013-07-16 Operator changed from 5601, MOORE WELL SERVICES INC to 9150, NIGHTHAWK HOLDINGS LLC
Change of Owner 2014-01-15 Operator changed from 9150, NIGHTHAWK HOLDINGS LLC to 9225, BARDALL RICHARD & MARY
APP 2014-01-22 Proposed Formations:CLINTON, Issued Date:1/22/2014, Expired Date:1/22/2016 12:00:00 PM, Drilling unit acres:86, Proposed Well Type:OG, Proposed Well Class:
Plugged/Abandoned 2014-02-06 QUAD=CAMBRIDGE, GL=990.2
Construction Permit Expires 2016-01-22 QUAD=CAMBRIDGE, GL=990.2
Record Last Modified 2017-02-10 QUAD=CAMBRIDGE, GL=990.2

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2006-09-11 3462 3470 0
2006-09-11 5746 5780 12
3462 3470 0
3462 3470 0

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
Not Treated 0 30 Qts 0
H2O 0 61500 Gal 28000

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1984 KST OIL & GAS CO INC 13647.00 0.00 365
1985 KST OIL & GAS CO INC 10716.00 0.00 365
1986 KST OIL & GAS CO INC 10182.00 54.00 365
1987 KST OIL & GAS CO INC 9715.00 0.00 365
1988 KST OIL & GAS CO INC 7190.00 0.00 365
1989 KST OIL & GAS CO INC 6427.00 0.00 365
1990 KST OIL & GAS CO INC 5479.00 0.00 365
1991 KST OIL & GAS CO INC 4456.00 0.00 365
1992 KST OIL & GAS CO INC 4969.00 0.00 365
1993 KST OIL & GAS CO INC 4849.00 0.00 365
1994 KST OIL & GAS CO INC 4222.00 0.00 365
1995 KST OIL & GAS CO INC 3060.00 0.00 365
1996 BELDEN & BLAKE CORPORATION 3031.00 0.00 242
1997 BELDEN & BLAKE CORPORATION 0.00 0.00 366
2000 MOORE WELL SERVICES INC 0.00 0.00 0
2001 MOORE WELL SERVICES INC 17.00 3.00 90
2002 MOORE WELL SERVICES INC 0.00 0.00 0
2003 MOORE WELL SERVICES INC 0.00 0.00 0
2004 MOORE WELL SERVICES INC 0.00 0.00 0
2005 MOORE WELL SERVICES INC 0.00 0.00 0
2006 MOORE WELL SERVICES INC 0.00 0.00 0
2007 MOORE WELL SERVICES INC 0.00 0.00 0
2008 MOORE WELL SERVICES INC 0.00 0.00 0
2009 MOORE WELL SERVICES INC 0.00 0.00 0
2010 MOORE WELL SERVICES INC 0.00 0.00 0
2011 MOORE WELL SERVICES INC 0.00 0.00 0
2012 MOORE WELL SERVICES INC 0.00 0.00 0
2013 MOORE WELL SERVICES INC 0.00 0.00 0

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1984 KST OIL & GAS CO INC Brine 0 365
1985 KST OIL & GAS CO INC Brine 40 365
1986 KST OIL & GAS CO INC Brine 25 365
1987 KST OIL & GAS CO INC Brine 0 365
1988 KST OIL & GAS CO INC Brine 0 365
1989 KST OIL & GAS CO INC Brine 70 365
1990 KST OIL & GAS CO INC Brine 0 365
1991 KST OIL & GAS CO INC Brine 26 365
1992 KST OIL & GAS CO INC Brine 146 365
1993 KST OIL & GAS CO INC Brine 41 365
1994 KST OIL & GAS CO INC Brine 38 365
1995 KST OIL & GAS CO INC Brine 35 365
1996 BELDEN & BLAKE CORPORATION Brine 48 242
1997 BELDEN & BLAKE CORPORATION Brine 179 366
2000 MOORE WELL SERVICES INC Brine 0 0
2001 MOORE WELL SERVICES INC Brine 0 90
2002 MOORE WELL SERVICES INC Brine 0 0
2003 MOORE WELL SERVICES INC Brine
2004 MOORE WELL SERVICES INC Brine 0 0
2005 MOORE WELL SERVICES INC Brine 0 0
2006 MOORE WELL SERVICES INC Brine 0 0
2007 MOORE WELL SERVICES INC Brine 0 0
2008 MOORE WELL SERVICES INC Brine 0 0
2009 MOORE WELL SERVICES INC Brine 0 0
2010 MOORE WELL SERVICES INC Brine 0 0
2011 MOORE WELL SERVICES INC Brine 0 0
2012 MOORE WELL SERVICES INC Brine 0 0
2013 MOORE WELL SERVICES INC Brine 0 0

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1186051229 2014-1-31 0:00: PB No Violations 6.00
-667639363 2015-2-3 0:00:0 FR No Violations 1.00
0146121974 2014-01-29 Plug / Plug Back No Violations I am on site today with Glenn Davis Plugging rig. The had trouble getting the rig running because it was -14 last night and is only -8 now. After the rig was started they tried to free up the packer which is on tubing inside 4.5 inch diameter casing. They could not free up the packer to pull it so I advised that they drive it down past the perfs and call a shooter out to shoot off the tubing and while on site shoot a hole at 4800 ft to cover the Newburg which has H2S. It was not covered during the production casing cement job and needs to be covered. The 4.5 inch casing is full of holes and my part and can not be used to set any plugs. Job will be on Friday if shot truck and cementers can be on site.
0339620456 2014-02-03 Plug / Plug Back No Violations Arrive on site today to plug well to surface. Glenn Davis Well could not get 4-1/2 inch casing to rip. Tried from 4500 ft and did get casing to part at 3840 ft . Because it took longer to rip than planned the cementers are out on another job and this plug is not set for Tuesday.
0598006582 2014-02-11 Plug / Plug Back No Violations Check on this well which has been plugged and found that the pipe has been cut off and I did not find any leaks at this time. This is a landowner well and the equipment has been removed and the area will not need seeded because it a a hay field.
0667639363 2015-02-03 Final Restoration No Violations I am here to check on the final restoration and found that the well site has a pile of dirt which needs graded and the production tanks and other producing equipment needs to be removed. Found that the well is the landowners also all of the equipment so the restoration final is approved.
0724615266 2014-01-30 Plug / Plug Back No Violations Glenn Davis Well Service is on site and drove the packer down the hole so shooters can shoot the tubing off and use it to set the bottom plug. Cementer are to be on site Friday to finish plugging the well.
0943470039 2014-01-23 Plug / Plug Back No Violations I was contacted that Glenn Davis was moving in today and would be plugging this well. I did not have the permit number just a lease name and did not find the rig. I contacted Inspector Grimm who also talked with the operator. While looking for this well I also needed to meet with Inspector Grimm to review follow up inspections which he covered while I was off.
1186051229 2014-01-31 Plug / Plug Back No Violations Glenn Davis Well Service drove packer which is on 2-3/8 inch tubing to 5750 ft and now we are waiting on Appalachian Well service to shoot off the tubing so that the tubing can be used to set the bottom plug and then Appalachian Well can shoot again at 4800 ft out the bottom of the 2-3/8 and shoot thru the 4-1/2 inch diameter casing. 15 shots were used to perf the casing so that a second plug could be set before pulling up on the casing. The well has H2S and there is a hole in the casing so I do not want to try and rip it before I can perf and set another plug. Formation Cementing Service set both plugs thru 2-3/8 inch diameter tubing. Next Davis Well will pull out all of the tubing so they can try and rip the 4-1/2 inch diameter casing. Then all of the casing needs pulled and tubing ran back to plug the remaining plugs to surface.
1390925563 2014-01-24 Plug / Plug Back No Violations I arrived on site to plug the well today. I had to wait on the crew to arrive and the service rig was too cold to start. Plugging will continue after the cold snap is over. Everything is froze
1391698797 2014-02-06 Plug / Plug Back No Violations I am on site today to finish plugging this well to surface. Glenn Davis Well Service has 2-3/8 inch diameter tubing at 3840 ft and will set plug # 3 from 3840 to 3640 ft then pull up 73 jts to set plug # 4 @ 1580 to 1380 ft . Pull 44 jts and set plug # 5 from 200 to 0 ft Formation Cement Service c/w sks total for today and sks total fot the job.
146121974 2014-1-29 0:00: PB No Violations 3.00
1517630634 2014-02-05 Plug / Plug Back No Violations I arrived today to finish plugging this well to surface. The weather is bad with 8 to 10 inches of snow and now freezing rain. While waiting for the cementers called and said that they could not get here so the job is cancelled for today. Set up for Thursday at 8 AM
339620456 2014-2-3 0:00:0 PB No Violations 3.00
598006582 2014-2-11 0:00: PB No Violations 1.00
724615266 2014-1-30 0:00: PB No Violations 2.00
943470039 2014-1-23 0:00: PB No Violations 1.50

For data sources see[9]

References