X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-013-20747

Well Details

Well ID: 34-013-20747
Loading map...
Country: United States
State: Ohio
County: Belmont
Municipality: Smith Township
Operator Name: RICE DRILLING D LLC
Well Pad ID: US-OH-001042
Farm/Lease Name: GOLD DIGGER
License Status: Producing
License Date: 2014-07-23
Spud Date: 2014-05-23
Spud Drilling Contractor: PATTERSON DRILLING
Final Drill Date: 2014-08-18
Well Total Depth: 18855.00 ft
Configuration: Horizontal
Latitude: 40.010000
Longitude: -80.940000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2014-01-31 Proposed Formations:UTICA/POINT PLEASANT, Issued Date:1/31/2014, Expired Date:1/31/2016 12:00:00 PM, Drilling unit acres:0, Proposed Well Type:ST, Proposed Well Class:STRT
APP 2014-07-23 Proposed Formations:UTICA/POINT PLEASANT, Issued Date:7/23/2014, Expired Date:7/22/2016 12:00:00 PM, Drilling unit acres:386.592, Proposed Well Type:OG, Proposed Well Class:EDPW
Reached Total Depth 2014-08-18
Correction to Well 2015-06-05 CHANGE IN TARGET AND TAKE-POINT INFORMATION (FOOTAGES AND COORDINATES) FROM AS DRILLED SURVEY PLAT.
Construction Permit Expires 2016-07-22
Completion Report Received 2017-01-18
Record Last Modified 2017-10-23

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2015-05-28 9736 18812 0
9736 18812 0
9736 18812 0

For data sources see[3]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 11/21/2014 12/27/2014 9531 18,071,800.0 23,651,400.0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Econoprop 30/50 (2.7 sg) WFT Proppant Silicon Dioxide, (amorphous as glass) 7631-86-9 35 0.185729 306635
Mullite (Aluminum Silicate) 1302-93-8 85 0.451056 744686
Silica Crystalline-Cristobalite 14464-46-1 20 0.106131 175220
Other Chemicals Phosphonic acid ammonium salt Proprietary 0 0.000652256 1076.86
Acetaldehyde 75-07-0 0 0.00000451 7.45
Dioxane 123-91-1 0 0.00000451 7.45
Ethylene Oxide 75-21-8 0 0.00000451 7.45
Cinnamaldehyde 104-55-2 0 0.00002255 37.23
Water Rice Energy Carrier / Base Fluid Carrier / Base Fluid - Water 7732-18-5 100 85.266 150,719,000.0
Bio- WFT Bactericide 2,2-dibromo-3-nitriloproppionamide 10222-01-2 5 0.00129953 2145.5
Polyethylene Glycol 25322-68-3 65 0.0168938 27891.4
Dibromoacetonitrile 3252-43-5 0.5 0.000129953 214.55
Sodium Bromide 7647-15-6 1.5 0.000389858 643.65
15% HCL WFT Acid Hydrochloric Acid 7647-01-0 15 0.0392159 64744.8
WAI-251LC WFT Inhibitor Triethylphosphate 78-40-0 5 0.00002255 37.23
N,N-Dimethylformamide 68-12-2 20 0.00009021 148.93
2-Butoxyethanol 111-76-2 10 0.00004510 74.47
1-Octanol 111-87-5 5 0.00002255 37.23
Isopropyl Alcohol 67-63-0 5 0.00002255 37.23
Ethoxylated Nonylphenol 68412-54-4 5 0.00002255 37.23
1-Decanol 112-30-1 5 0.00002255 37.23
Ethylene Glycol 111-76-2 40 0.000180415 297.86
Tar bases, quinoline derivs, benzyl chloride-quaternized 72480-70-7 10 0.00004510 74.47
Friction Reducers WFT Friction Reducers Petroleum distillates, hydrotreated light 64742-47-8 40 0.249551 412004
Ammonium acetate 631-61-8 5 0.00311939 5150.05
40/70 Premium WFT Proppant Crystalline Silica in the form of Quartz 14808-60-7 100 2.33042 3,847,480.0
WIC-641L WFT Iron Control Citric acid 77-92-9 60 0.00159395 2631.58
100 Mesh WFT Proppant Crystalline Silica in the form of Quartz 14808-60-7 100 10.9295 18,044,400.0
WSI-685L WFT Inhibitor Ammonium Chloride 12125-02-9 15 0.00435845 7195.72
Monoethanolamine Hydrochloride 2002-24-6 15 0.00435845 7195.72
Methyl Alcohol 67-56-1 2.5 0.000726408 1199.29

For data sources see[4]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
2014-11-21 H2O 15 9241 Bbl 501020 Weatherford STAGE 1/45

36 SHOTS STGES 2-44 SEE IMAGES

2014-12-27 H2O 15 8706 Bbl 486730 Weatherford STAGE 45/45

36 SHOTS

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2015 RICE DRILLING D LLC 4305040 0 316
2016 RICE DRILLING D LLC 3739535 0 360
2017 RICE DRILLING D LLC 1967911 0 362
2018 RICE DRILLING D LLC 1493229 0 150
2019 RICE DRILLING D LLC 307601 0 90

For data sources see[6] [7]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2015 RICE DRILLING D LLC Brine 29153 316
2016 RICE DRILLING D LLC Brine 35274 360
2017 RICE DRILLING D LLC Brine 15457 362
2018 RICE DRILLING D LLC Brine 35772 150
2019 RICE DRILLING D LLC Brine 5706 90

For data sources see[8] [9]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1672412371 2018-4-6 0:00:0 PW No Violations 0.50
-351653041 2018-4-6 0:00:0 PW No Violations 1.00
-508735915 2020-6-29 0:00: PW No Violations 0.50
-967527408 2014-11-17 0:00 CT No Violations 1.00
0351653041 2018-04-06 Production Wells No Violations On the day of my inspection I witnessed that the well was equipped with a plunger lift system with valves in the open position. Gauges were present for monitoring annular pressure 13.375 inch diameter casing digital readout was not working at time of my inspection, 9.625 inch diameter casing read 1982 pounds per square inch, there was a blow down line installed on the 9.625 inch diameter casing, valve was currently shut. The production equipment included a Gas Processing unit, a line heater and a sand trap. Also present 5- 400 barrel purge tanks shared with 3401320746, 3401321072, 3401321073, 3401321074, 3401321075, 3401321076. Identification tags were present and production was up to date.
0387971175 2016-02-01 Preliminary Restoration No Violations On this day this site appeared to be in satisfactory condition. Erosion and sediment controls are in place and functioning properly. Preliminary Restoration for this site has passed.
0967527408 2014-11-17 Completion Testing No Violations On this day completions work was to begin. A zipper frac was to be utilized where the two wells on the pad would be completed at the same time. No violations noted.
1201331991 2019-8-27 0:00: PW No Violations 0.20
1497614625 2017-06-15 Production Wells No Violations
1534265265 2018-08-13 Production Wells No Violations On the day of my inspection accompanied by ODNR inspector Bill Stolarik I witnessed that the well was equipped with a four-string casing design. Annular pressure monitoring was in place, the 9.625-inch diameter intermediate casing gauge read 1400 pounds per square inch, the 13.375-inch diameter surface casing gauge read 426 pounds per square inch. The 5.5-inch diameter production casing was also at 1400 pounds per square inch and appeared to be communicating with the 9.625-inch diameter deep intermediate casing. The 2.875-inch diameter tubing and flow line pressures were at 1475 pounds per square inch. Production equipment included an individual Gas Processing unit. Shared production equipment included 5- 400-barrel production fluid tanks shared with 34013210760000, 34013210750000, 34013210740000, 34013210730000, 34013210720000, 34013207460000. The well pad and all equipment were contained in an earthen dike with secondary containment around the production tanks. There were multiple Emergency Shutoff Devices on location, Identification tags were present, and production was up to date.
1535044828 2018-08-23 Production Wells No Violations Follow up inspection to violation # 1543862543 issued on 08/13/2018. Upon inspection the well was observed to be equipped with a lower A and upper B section with 2 diameter riser pipes attached to the A&B section outlet ports, the riser pipes are equipped with valves and gauges. The A section gauge which monitors the pressure between the 13.375 and 9.625 diameter casing string reads 478 pound pressure. The B section gauge which monitors the pressure between the 5.5 and 9.625 diameter strings reads 750 pounds pressure. The 5.5 diameter production casing reads 1,500 pounds pressure and the production tubing head reads 1,500 pounds pressure. 7 wells total are producing on this pad. The production fluid storage area consists of 5 steel design 400 barrel fluid volume tanks that are situated inside a polymer lined steel containment dike area.
1536773010 2018-09-12 Production Wells No Violations Follow up inspection to violation # 1543862543 issued on 08/13/2018 found a service rig snubbing unit owned by Consolidated Well Services on site and rigging up preparing to pull the production tubing out of the well bore. A 2 way check back pressure valve has been installed in the tubing hanger and the production tree removed. A 7.0625 diameter manual master valve has been installed on the well head B section with a work over blow out preventer being installed above the master valve. The company man on site indicated this rig is to only pull the production tubing at this time with this rig.
1537976240 2018-09-26 Production Wells No Violations Compliance notice follow up inspection to violation # 1543862543 found the company has pulled the production tubing out of the well. No further repairs or evaluation was reported as completed past that point. The production tubing head has been removed from the well and a 7.0625 master valve installed. The valve is in the closed position with no flow line attached. There is 2 diameter riser pipes with valves and gauges present attached to the well head A&B sections. The A section which monitors the 13.375 casing pressure shows 34.22 pounds pressure. The B section which monitors the 9.625 casing pressure shows zero pressure. The 5.5 casing shows 1,600 pounds pressure. There is a flow line attached to the B well head section. Polymer containment is present on the well pad and this is a 7 well pad. On this day I called John Ellinder with EQT and he indicated the tubing was pulled and a bond log ran. Mr. .Ellinder also indicated a pressure test was conducted on the casing and the production tree was found to be leaking. I requested a copy of the bond log.
1542809798 2018-11-21 Production Wells No Violations Compliance notice follow up inspection to violation # 1543862543 found the company has made corrections to the well to remedy the annular pressure. The company has submitted email documentation referencing information pertaining to the annular pressure issue being caused by pressure leaking through the well head 5.5 diameter casing seal allowing annular pressure to be present between the exterior of the 5.5 diameter production casing and the internal area of the 9.625 diameter casing string. I observed a new well head B section tubing head adaptor plate has been installed and (2) manual gate valves and (2) 1/4 turn ball valves are present on the production tree. There is also a motor valve present on the production flow line, the motor valve control line that controls the motor valve is tied back into the 5.5 casing well head section outlet. Annular pressure monitoring is in place and upon inspection 18 pounds pressure was found on the 9.625 section and zero pressure was found on the 13.375 well head section. The company is submitting the well pressures to the Division. The previous violation is considered resolved.
1543862543 2018-08-13 Production Wells Violations Noted Status check inspection accompanied by ODNR Inspector Ryan Armstrong. The purpose of inspection was to check the well head pressures. The well is equipped with a lower A and upper B section with 2 diameter riser pipes installed on the A&B sections to monitor annular pressure. The riser pipes on both the A&B sections are equipped with valves and gauges. The A section which monitors the pressure between the 13.375 and 9.625 diameter casing strings shows 426 pounds per square inch (psi) on the manual gauge. The B section which monitors the pressure between the 9.625 and 5.5 diameter casing strings shows 1,400 psi on the gauge. The 5.5 diameter casing internal pressure shows 1,400 psi on the gauge. The production tubing head shows 1,475 psi going into the flow line. On the East side of the well pad is a production facility consisting of 5 steel construction 400 barrel capacity production tanks situated inside a polymer lined steel containment dike area. The well pad is protected by an earthen berm however no sump drains with gate valves are present. Emergency shut down devices are placed at all critical points on the well pad with fire extinguisher stations present, however all fire extinguishers are missing. Also noted was during my last inspection on 07/10/2018 the 5.5 production casing internal working pressure and annular pressure was equalized at 2,214 pounds per square inch pressure. Historically addressing the well history. On June 18, 2018 the Division received email notification from John Helmick with EQT indicating that sometime on or after 3/19/2015 the well was put into production and higher than expected annular pressures were observed. Also noted was the company indicated that a hole has developed in the 5.5 diameter production casing. Corrective action required: Under OAC 1509:12 Defective casing or Tubing and OAC 1501:9-1-08 Well construction rules section (N) Annular Pressure. The well owner/operator shall contact inspector Bill Stolarik within 7 days
1672412371 2018-04-06 Production Wells No Violations On the day of my inspection I witnessed that the well was open flowing with no artificial lift system in place, valves were in the open position. Gauges were present for monitoring annular pressure 13.375 inch diameter casing digital readout was not working at time of my inspection, 9.625 inch diameter casing read 1982 pounds per square inch, there was a blow down line installed on the 9.625 inch diameter casing, valve was currently shut. The production equipment included a Gas Processing unit, a line heater and a sand trap. Also present 5- 400 barrel purge tanks shared with 3401320746, 3401321072, 3401321073, 3401321074, 3401321075, 3401321076. Identification tags were present and production was up to date.
1693031631 2018-07-10 Production Wells No Violations On site inspection accompanied by ODNR Inspector Ryan Armstrong. The well site entrance point was marked with signage and the lease road was of gravel construction. There is 2 well pads sitting next to one another back the same lease road with the Gold Digger being the rear pad and the Sonuvadigger being the pad closest to State Route 9. There was recently 5 wells newly drilled on the pad and 2 prior producing wells. The said well was equipped with electronic annular pressure monitoring on both the 13.375 and 9.625 well head sections. The 9.625 well head gauge showed 2,214 psi and the 13.375 showed 389 psi on the manual gauge also the 5.5 production casing had 2,214 psi. The well was selling off the production tubing tree with 2 manually controlled valves in place on the well head followed by an emergency shut down valve with multiple shut down point on the well pad. Also present on location is one gas processing unit present for each well supported by a production fluid facility consisting of 5 steel tanks of 400 barrel construction design situated inside a polymer lined steel containment dike area.
387971175 2016-2-1 0:00:0 PL No Violations 1.00
97706168 2020-3-3 0:00:0 PW No Violations 0.20

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1543862543 US-OH-114961 2018-08-15 Defective casing, leaking well

For data sources see[10]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "FracFocus Fracking Chemicals Database". 2019-04-02. Retrieved 2019-06-19. 
  5. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  10. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-013-20747&oldid=14268779"