X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-115-21363

Well Details

Well ID: 37-115-21363
Loading map...
Country: United States
State: Pennsylvania
County: Susquehanna
Municipality: Brooklyn Township
Operator Name: CABOT OIL & GAS CORP
Well Pad ID: 147649
Farm/Lease Name: KEEVES J 1
License Status:
Spud Date:
Permit Date: 2013-07-31
Well Type: GAS
Unconventional Well: Y
Configuration: Horizontal Well
Conservation: No
Latitude: 41.771764
Longitude: -75.781561

For data sources see[1][2][3]

Well History

Date Event
2013-07-31 New Permit Application
2013-09-30 Performed Spud Operation
2013-11-29 Drilling Completion
2014-07-20 Perforation
2014-09-13 Performed Stimulation
2015-02-02 DEVIATED

For data sources see[4]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 2014-08-09 2014-09-25 7,214 11,002,300 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 40/70 White FTSI proppant Silica, Quartz 14808-60-7 100 10.4388 10,831,500.0
100 Mesh Sand FTSI proppant Silica, Quartz 14808-60-7 100 0.579568 601368
Hydrochloric Acid (HCl) FTSI Acid Hydrogen Chloride 7647-01-0 37 0.145427 150897
Water 7732-18-5 63 0.24762 256934
ICI-3240 FTSI Biocide Dazomet (Tetrahydro-3, 5-dimethyl-2H-1,
3, 5-thiadiazine-2-thione.
533-74-4 24 0.00607522 6303.73
Sodium Hydroxide 1310-73-2 23 0.00582209 6041.07
Water 7732-18-5 55 0.0139224 14446
FE-100L FTSI Iron control Citric acid 77-92-9 55 0.000702704 729.14
Water 7732-18-5 60 0.000766586 795.42
Water Operator Carrier Water 7732-18-5 100 88.4331 91,759,300.0
CI-150 FTSI Acid Corrosion Inhibitor Organic amine resin salt Proprietary 30 0.000208633 216.48
Diethylene glycol 111-46-6 1 0.00000695 7.22
Aromatic aldehyde Proprietary 10 0.00006954 72.16
Ethylene Glycol 107-21-1 30 0.000208633 216.48
Quaternary ammonium compound Proprietary 10 0.00006954 72.16
Fatty Acid Salt Proprietary 0.1 0.00000070 0.72
Water 7732-18-5 5 0.00003477 36.08
Dimethylformamide 68-12-2 10 0.00006954 72.16
Fatty Acid Proprietary 0.1 0.00000070 0.72
Isopropanol 67-63-0 30 0.000208633 216.48
Aliphatic alcohol Proprietary 0.1 0.00000070 0.72
Alkylene Oxide Block Polymer Proprietary 10 0.00006954 72.16
FRW-200 FTSI Friction reducer Acrylamide P/W acrylic acid, ammonium salt 26100-47-0 25 0.0257878 26757.8
Acrylamide 79-06-1 0.1 0.000103151 107.03
Polyethylene glycol monooleate 9004-96-0 3 0.00309454 3210.93
Alcohols (C12-C14), ethoxylated 68439-50-9 4 0.00412605 4281.24
Ammonium Chloride 12125-02-9 12 0.0123781 12843.7
Hydrotreated heavy paraffinic 64742-54-7 5 0.00515756 5351.55
Sorbitan Monooleate 1338-43-8 3 0.00309454 3210.93
Copolymer of acrylamide and sodium acrylate 25987-30-8 33 0.0340399 35320.3
Water 7732-18-5 48 0.0495126 51374.9
Petroleum distillate hydrotreated light 64742-47-8 26 0.0268193 27828.1
Surfactant Proprietary 7 0.00722058 7492.18
Alkyloxypolyethyleneoxyethanol 84133-50-6 1 0.00103151 1070.31
Isopropanol 67-63-0 0.3 0.000309454 321.09
Dewaxed heavy paraffinic 64742-65-0 1.5 0.00154727 1605.47
Alcohols (C10-C16), ethoxylated 68002-97-1 4 0.00412605 4281.24
Alcohols (C12-C16), ethoxylated 68551-12-2 4 0.00412605 4281.24
Ammonium Acrylate 10604-69-0 0.5 0.000515756 535.16
Sorbitol Tetraoleate 61723-83-9 2 0.00206302 2140.62
CS-500 SI FTSI Scale inhibitor Acrylic Polymer Proprietary 0 0 0
Sodium Polyacrylate 9003-04-7 5 0.0012508 1297.85
Ethylene glycol 107-21-1 10 0.0025016 2595.69
Sodium chloride 7647-14-5 6 0.00150096 1557.41
Water 7732-18-5 55 0.0137588 14276.3

For data sources see[5]

Stimulation Data

Stimulation Date Phase Number Chemical Agent Volume (gal) Treating Pressure (psi) Breakdown Pressure (psi)
2014-09-13 0 0 0

For data sources see[6]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2013 CABOT OIL & GAS CORP 0.00 0 0.00 0 0.00 0
2014 CABOT OIL & GAS CORP 0.00 0 0.00 0 0.00 0
2015 CABOT OIL & GAS CORP 3,264,605.18 365 0.00 0 0.00 0
2016 CABOT OIL & GAS CORP 3,005,393.95 366 0.00 0 0.00 0
2017 CABOT OIL & GAS CORP 1,506,763.90 365 0.00 0 0.00 0
2018 CABOT OIL & GAS CORP 1,143,354.00 266 0.00 0 0.00 0
2019 CABOT OIL & GAS CORP 152,675.00 365 0.00 0 0.00 0

For data sources see[7]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2013 CABOT OIL & GAS CORP Drilling Fluid Waste 1,155.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2013 CABOT OIL & GAS CORP Drilling Fluid Waste 26.33 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2013 CABOT OIL & GAS CORP Drill Cuttings 1,230.89 Tons LANDFILL 8-0728-0004/013
2014 CABOT OIL & GAS CORP Servicing Fluid 349.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2014 CABOT OIL & GAS CORP Servicing Fluid 1,650.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2015 CABOT OIL & GAS CORP Fracing Fluid Waste 170.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2015 CABOT OIL & GAS CORP Fracing Fluid Waste 4,526.52 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2015 CABOT OIL & GAS CORP Produced Fluid 1,619.16 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2015 CABOT OIL & GAS CORP Produced Fluid 3.56 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2016 CABOT OIL & GAS CORP Produced Fluid 310.98 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2016 CABOT OIL & GAS CORP Produced Fluid 597.75 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2017 CABOT OIL & GAS CORP Produced Fluid 105.02 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2017 CABOT OIL & GAS CORP Produced Fluid 193.63 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Produced Fluid 11.43 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004
2018 CABOT OIL & GAS CORP Produced Fluid 200.00 Bbl REUSE (AT WELL PAD)
2018 CABOT OIL & GAS CORP Produced Fluid 419.37 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Synthetic Liner Materials 7.75 Tons LANDFILL 101247
2018 CABOT OIL & GAS CORP Produced Fluid 126.54 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2019 CABOT OIL & GAS CORP Produced Fluid 31.54 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2019 CABOT OIL & GAS CORP Produced Fluid 14.24 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004

For data sources see[8]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2210542 Primary Facility 2013-09-27 Routine/Complete Inspection No Violations Noted Refer to inspection ID # 2210537
2223901 Primary Facility 2013-11-13 Drilling/Alteration No Violations Noted cement log atatched
2227398 Primary Facility 2013-12-04 Drilling/Alteration No Violations Noted well failed 5.5 casing integrity test preparing to ream, and unscrew for repair
2227871 Primary Facility 2013-12-10 Drilling/Alteration No Violations Noted well is process of repair
2307588 Primary Facility 2014-09-25 Incident- Response to Accident or Event No Violations Noted
2371966 Primary Facility 2015-05-20 Routine/Complete Inspection No Violations Noted
2473396 Primary Facility 2016-04-11 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:15 a.m., the cellar had water at the bottom with no bubbling noticed, the (13x9) vent pipe was open and venting to a tank, the (9x5) vent pipe was open and venting to a tank, there was 741psi on the production casing. I took a walk around the location and everything looked OK.

I left the site at 11:20 a.m.

2612697 Primary Facility 2017-07-05 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:45a.m.

The cellar was about a quarter full of water with no bubbling noticed. The (13x9) annulus vent pipe was open and venting into a small plastic tank, the (9x5) annulus vent pipe was open and venting into a small plastic tank. All the annulus vent pipes were connected to one pipe going into the same tank. There was 606psi on the production casing. I took a walk around the location and there were no obvious concerns noticed. I left the site at 11:40a.m.

For data sources see[9]

References