X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-105-00739

Well Details

Well ID: 37-105-00739
Loading map...
Country: United States
State: Pennsylvania
County: Potter
Municipality: Sharon Township
Operator Name: GOOD RICHARD J
Well Pad ID:
Farm/Lease Name: R J GOOD 1723
License Status: ACTIVE
Spud Date:
Permit Date:
Well Type: GAS
Unconventional Well: N
Configuration: Vertical Well
Conservation: No
Latitude: 41.976125
Longitude: -78.144924

For data sources see[1][2][3]

Well History

Date Event
1902-03-22 Drilling Completion
1993-04-26 OLD WELL

For data sources see[4]


Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
1993 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1994 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1995 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1996 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1997 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1998 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
1999 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2000 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2001 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2002 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2003 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2004 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2005 GOOD RICHARD J 83 365 0.00 0 0.00 0
2006 GOOD RICHARD J 0.00 0 0.00 0 0.00 0
2007 GOOD RICHARD J 83.00 365 0.00 0 0.00 0
2008 GOOD RICHARD J 83.00 365 0.00 0 0.00 0
2009 GOOD RICHARD J 83.00 365 0.00 0 0.00 0

For data sources see[5]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2473080 Primary Facility 2016-04-06 Routine/Complete Inspection No Violations Noted
2853296 Primary Facility 2019-03-13 Routine/Complete Inspection No Violations Noted At the time of this inspection this well appeared to be a producing well. Well is approximately a 10" diameter casing out of the ground . The wellhead assembly is a solid body tee (t) style fitting that is approximately 5" x 2" x 2" x 2". One side of the tee style fitting has a valve (open) that is attached to approximately 2" diameter line that goes into a steel box that is locked and contains a meter and shut off valve at the meter ( info from owner). The other side of the tee style fitting has a 2" x 2" x 1" tee (t) style fitting valve (open) connected to a production / flow line that goes into the ground. The 1" opening is connected to a line with a gauge that was showing 60 psi (pounds per square inch) pressure on the production line at the time of this inspection. The other 2" opening on the tee style valve is attached to the pump jack. No violations noted at this inspection.

For data sources see[6]

References