X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-015-23345

Well Details

Well ID: 37-015-23345
Loading map...
Country: United States
State: Pennsylvania
County: Bradford
Municipality: Overton Township
Operator Name: CHIEF OIL & GAS LLC
Well Pad ID: 154343
Farm/Lease Name: L. KINGSLEY NE UNIT
License Status:
Spud Date:
Permit Date: 2017-06-30
Well Type: GAS
Unconventional Well: Y
Configuration: Horizontal Well
Conservation: No
Latitude: 41.596942
Longitude: -76.581319

For data sources see[1][2][3]

Well History

Date Event
2017-06-30 New Permit Application
2017-12-02 Performed Spud Operation

For data sources see[4]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 2018-09-20 2018-10-11 8,920 12,626,500 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Ethanol, 2,2',2"-nitrilotris-,
tris(dihydrogen phosphate) (ester), sodium salt
68171-29-9 30 0.00153 1926
Copolymer of 2-propenamide 79-06-1 20 0.01263 15861
Water 7732-18-5 80 0.01931 24254
Water 7732-18-5 85 0.14164 177912
Glutaraldehyde 111-30-8 5 0.00121 1516
Distillate, petroleum, hydrotreated, light 64742-47-8 20 0.01263 15861
Water 7732-18-5 100 83.8844 105,368,000.0
Thiourea 62-56-6 1 0.00001000 2
Water 7732-18-5 40 0.00204 2568
Crystallilne silica 14808-60-7 100 15.8564 19,917,400.0
Oleic acid diethanolamide 93-83-4 2 0.00126 1586
Ethylene glycol 107-21-1 30 0.00153 1926
Acetophenone 98-86-2 1 0.00001000 2
Quaternary ammonium compound 68424-85-1 10 0.00241 3032
Ethanol 64-17-5 5 0.00121 1516
Ethoxylated (C10-16) alcohols 68002-97-1 35 0.00005000 62
Alcohols, C12-16, ethoxylated 68551-12-2 2 0.00126 1586
Formaldehyde 50-00-0 1 0.00001000 2
Hydrochloric acid 7647-01-0 15 0.02499 31396
Methanol 67-56-1 5 0.00001000 9
Water 7732-18-5 50 0.03157 39651
Diethylene glycol mono-n-butyl ether 112-34-5 60 0.00009000 107
Unihib G GeoSafe Acid Inhibitor Listed Below
Unislick CST-LA Chemplex, Solvay Group Friction Reducer Listed Below
BIOC11139A Nalco Champion biocide Listed Below
Sand Sargent/Unimin Proppant Listed Below
Hydrochloric Acid PVS Acidizing Listed Below
Water Chief Oil & Gas Carrier/Base Fluid Listed Below
SCAL 161484A Nalco Champiion Scale Inhibitor Listed Below

For data sources see[5]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2017 CHIEF OIL & GAS LLC 0.00 0 0.00 0 0.00 0
2018 CHIEF OIL & GAS LLC 560,973.15 42 0.00 0 0.00 0
2019 CHIEF OIL & GAS LLC 3,757,677.27 355 0.00 0 0.00 0

For data sources see[6]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2018 CHIEF OIL & GAS LLC Drill Cuttings 1,415.33 Tons LANDFILL 301358
2018 CHIEF OIL & GAS LLC Synthetic Liner Materials 19.48 Tons LANDFILL 301358
2018 CHIEF OIL & GAS LLC Produced Fluid 9,136.91 Bbl REUSE (AT WELL PAD)
2018 CHIEF OIL & GAS LLC Drilling Fluid Waste 902.86 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC010
2018 CHIEF OIL & GAS LLC Drilling Fluid Waste 215.45 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123
2018 CHIEF OIL & GAS LLC Produced Fluid 1,213.64 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123
2019 CHIEF OIL & GAS LLC Produced Fluid 630.00 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123
2019 CHIEF OIL & GAS LLC Synthetic Liner Materials 13.02 Tons LANDFILL 301358
2019 CHIEF OIL & GAS LLC Produced Fluid 17,975.20 Bbl REUSE (AT WELL PAD)

For data sources see[7]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2670483 Primary Facility 2017-12-12 Drilling/Alteration No Violations Noted Drilling of the well cellars underway. Drill cuttings being disposed of in roll off container. Drilling performed by Halliburton. No violations noted. Location snow covered.
2696144 Primary Facility 2018-02-20 Drilling/Alteration No Violations Noted Arrived @ 12:00. Weather: warm, T¿s in 40¿s. Precision 569 on site and beginning surface hole drilling on the L. Kingsley SE 4H during my inspection. Met with Ty Merreighn (company man), also onsite were Trey Villaneuve and Paul Ricco (drilling co-superintendent). Chief is employing batch drilling on this location and using the FMC DTO 30 wellhead system. Halliburton conducted the surface casing cement job on the SE2H during my inspection. The surface casing for the SE 3H had been previously cemented.
2699943 Primary Facility 2018-02-28 Drilling/Alteration No Violations Noted Arrived @ 12:00. Weather: warm, overcast. Precision 569 on site and drilling intermediate hole on the L. Kingsley SW 1H. 8 surface holes were finished and 3 intermediate holes cased. Met with Jeremy Boyd (company man). Reviewed 3 surface casing CBLs which showed no abnormalities. Discussed temperature of cement water. Chief is employing batch drilling on this location and using the FMC DTO 30 wellhead system. The order of work is to drill and case, then move the rig and start drilling the adjacent hole while cementing the just-cased wellbore.
2706764 Primary Facility 2018-03-15 Routine/Complete Inspection No Violations Noted I met Ty Marine when I arrived. Precision rig #569 on location, drilling at 6231' on the SW 2H well. 1-3" of snow on the site; snow on rig mats had been shoveled into piles on containment. Overall, site looked good, with containment berms in good condition and good housekeeping. Chemical storage area was neat and clean. I did note 4 vac boxes that had been set off of containment; a small (8' x 4') duck pond had been placed under the end that opens, but these had been buckled and folded under the vac boxes. When I mentioned it to Ty, he said that the boxes were empty, but that he had already called the company that had dropped them off, and they would be returning on Friday to re-set them.
2715344 Primary Facility 2018-03-29 Drilling/Alteration No Violations Noted Arrived @ 10:43 with Ulyana Trynovich (DEP OGI)Weather: overcast, foggy. Precision 569 on site at 3000' on the SE 3H. Met with Jeremy Boyd (company man). Reviewed several intermediate casing CBLs. There appeared to be decreased bond quality at approximately 750', based on a quick review. Requested electronic copies from Peg Farrell (Chief) for further review. Cement sample cups did not appear to be labelled. We agreed to label them consistently. Reviewed BOP test conducted on 3/21/18. Discussed level of detail in drillers log and noted that vertical section was logged. NW 2H from 100' to 1521', and SW1H from 1546' to 8640' MD. Also discussed changes in CBL timing. No violations were observed during this inspection.
2732763 Primary Facility 2018-05-22 Drilling/Alteration No Violations Noted Arrived @ 10:50. Weather: rain. Precision 569 on site at 16663' on the NE3H. Met with Jeremy Boyd (company man). Operations going well. Should skid over to last well on Friday. No violations were observed during this inspection.
2769763 Primary Facility 2018-08-31 Routine/Complete Inspection No Violations Noted Eight wells drilled in track and ready for production. Eight GPU installed within containment. The well supply and dump lines are being installed at this time. Heavy equipment onsite digging trenches for the pipe installation.
2811981 Primary Facility 2018-12-06 Routine/Complete Inspection No Violations Noted I met Greg Rohrer, Chief company man, when I arrived. Flowback operations were in progress, with temporary sand separators and GPUs hooked up and gas flowing to sales. Overall containment appeared to be in good condition, with the exception of the foam berm between the permanent GPUs and temporary ones; in what was obviously a high traffic area, the berm had been crushed. The containment volume for this area may still have been more than adequate, as only pass-through equipment was located on the containment, but I pointed it out to Greg anyway. I noted a 10'x12' puddle on the pad that showed slightly elevated conductance (2.88mS/cm) between the temporary GPUs and the Baker tank battery containment. A vac truck was pumping out the Baker tanks in this area, and Greg told me he would have the area vacced ASAP.

For data sources see[8]

References