X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-019-22134

Well Details

Well ID: 34-019-22134
Loading map...
County:
Municipality:
Operator Name:
Well Pad ID:
Farm/Lease Name:
First Permit Date:
Last Permit Date:
Spud Date: 2013-12-14
Unconventional:
Horizontal:
Producing: No
Violations: 0
Latitude: 40.4414868005
Longitude: -80.9695067026

Production Data

PERIOD GAS QUANTITY GAS PRODUCTION DAYS CONDENSATE QUANTITY CONDENSATE PRODUCTION DAYS OIL QUANTITY OIL PRODUCTION DAYS

Waste Data

PERIOD TYPE QUANTITY UNITS DISPOSAL METHOD WASTE FACILITY PERMIT ID WASTE FACILITY NAME FACILITY CITY FACILITY STATE

Inspection Data

INSPECTION ID DATE DESCRIPTION COMMENT VIOLATION ID VIOLATION CODE VIOLATION_COMMENT
-813430143 2013-12-30 I was on site to witness the cementing of the 13 3/8 inch surface casing. My inspection revealed that Nomac Drilling Rig 74 has drilled a 17.5 inch hole to a total depth of 598 feet and ran 588 feet of 13 3/8 inch casing (54.5 pound per foot casing and inside diameter of 12.615 inches). They installed 6 bowspring centralizers on joints 1,2,5,8,11, and 14. Schlumberger cemented the casing with 526 sacks of Class "A" (D901) 2% D154, 0.5% B248, 0.2% B160A, 0.2% D046, 1% S001, and .125 pound per sack D130. The cement had a density of 15.6 pounds per gallon, a yield of 1.21 cubic feet per sack, and they used 5.234 gallons of mix water per sack. They pumped 113 barrels of cement slurry, 84 barrels of displacement, and there was 25 barrels of cement returns. They landed the plug at 5:53am with 272 PSI; bumped pressure up to 817 PSI and conducted the casing test. The floats held and there was 1/2 barrel flowback when the pressure was released. The casing test was approved. My inspection revealed no violations at this time. NOTE: Had to wait on the Sweco wellhead hand to arrive on location so they could land the casing in the wellhead. He arrived on site at approximately 02:30am.
-920522754 2013-12-31 I was on site to check the status of Nomac Drilling Rig # 74. My inspection revealed that Nomac Drilling Rig # 74 is drilling the 12 1/4 inch intermediate hole at 1262 feet. My inspection also revealed no violations at this time.
1388397696 2013-12-16 I was on site to witness the cementing of the 20 inch conductor casing. My inspection revealed that Precision drilling has set 30 inch casing to a depth of 20 feet. They drilled a 26 inch hole to a total depth of 120 feet and ran 120 feet of 20 inch casing (94 pound per foot/ inside diameter of 19.124 inches). Allied cemented the casing with 309 sacks of Class "A" 2% CaCl and 1/2 pound per sack flake. The cement had a density of 15.6 pounds per gallon, a yield of 1.18 cubic feet per sack, and they used 5.23 gallons of mix water per sack. They pumped 65 barrels of cement slurry, 39 barrels of displacement, and there was 8 barrels of cement returns to surface. My inspection revealed no violations at this time.