If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.
powered by ChangeDetection
Well ID: 37-115-20594 | Loading map...
{"type":"SATELLITE","minzoom":false,"maxzoom":false,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"mappingservice":"googlemaps3","width":"100%","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"wmsoverlay":false,"copycoords":false,"static":false,"zoom":14,"layers":[],"controls":["pan","zoom","type","scale","streetview","rotate"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"resizable":false,"kmlrezoom":false,"poi":true,"markercluster":false,"clustergridsize":60,"clustermaxzoom":20,"clusterzoomonclick":true,"clusteraveragecenter":true,"clusterminsize":2,"imageoverlays":[],"kml":[],"gkml":[],"searchmarkers":"","enablefullscreen":false,"scrollwheelzoom":false,"locations":[{"text":"","title":"","link":"","lat":41.688636,"lon":-75.922086,"icon":""}]} |
Country: United States | |
State: Pennsylvania | |
County: Susquehanna | |
Municipality: Springville Township | |
Operator Name: CABOT OIL & GAS CORP | |
Well Pad ID: 147743 | |
Farm/Lease Name: AUGUSTINE 3 | |
License Status: | |
Spud Date: | |
Permit Date: 2011-06-17 | |
Well Type: GAS | |
Unconventional Well: Y | |
Configuration: Vertical Well | |
Conservation: No | |
Latitude: 41.688636 | |
Longitude: -75.922086 |
Date | Event |
---|---|
2011-06-17 | New Permit Application |
2011-08-01 | Performed Spud Operation |
2011-11-01 | Drilling Completion |
2012-02-06 | NEWLY DRILLED |
2012-09-23 | Drilling Completion |
2012-10-30 | Performed Stimulation |
2014-05-21 | DRILLED DEEPER |
For data sources see[4]
Job Number | Job Start Date | Job End Date | True Vertical Depth (ft) | Total Water Volume (gal) | Total Non-Water Volume (gal) |
---|---|---|---|---|---|
1 | 2012-10-29 | 2012-10-29 | 5,652 | 105,840 |
Job Number | Trade Name | Supplier | Purpose | Ingredient Name | CAS Number | Additive Percentage by Mass | Job Percentage by Mass | Mass Used (lb) |
---|---|---|---|---|---|---|---|---|
1 | Sand, White, 40/70 | Baker Hughes | Proppant | Quartz | 14808-60-7 | 1.00 | 0.04 | |
Alpha 1427 | Baker Hughes | Biocide | Didecyl dimethyl ammonium chloride | 7173-51-5 | 0.10 | 0.00002000 | ||
Quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides |
68424-85-1 | 0.05 | 0.00001000 | |||||
Glutaraldehyde | 111-30-8 | 0.30 | 0.00007000 | |||||
Ethanol | 64-17-5 | 0.05 | 0.00001000 | |||||
Scaletrol 720 | Baker Hughes | Scale Inhibitor | Calcium chloride | 10043-52-4 | 0.05 | 0.00001000 | ||
Ethylene glycol | 107-21-1 | 0.30 | 0.00008000 | |||||
Water | Operator | Carrier | Water | 7732-18-5 | 1.00 | 0.90 | ||
Superset-W | Baker Hughes | Activator | Methanol | 67-56-1 | 0.50 | 0.00085000 | ||
Nonyl phenol ethoxylate | 9016-45-9 | 0.50 | 0.00085000 | |||||
Super LC, 30/50 | Baker Hughes | Proppant | Quartz | 14808-60-7 | 0.97 | 0.04 | ||
Phenolic resin | 9003-35-4 | 0.05 | 0.00249000 | |||||
Methenamine | 100-97-0 | 0.00010000 | 0.00 | |||||
FRW-18 | Baker Hughes | Friction Reducer | Distillates, petroleum, hydrotreated light | 64742-47-8 | 0.30 | 0.00019000 |
For data sources see[5]
Stimulation Date | Phase Number | Chemical Agent | Volume (gal) | Treating Pressure (psi) | Breakdown Pressure (psi) |
---|---|---|---|---|---|
2012-10-30 | 0 | 0 | 0 |
For data sources see[6]
Period | Operator Name | Gas Quantity (mcf) | Gas Production Days | Oil Quantity (bbl) | Oil Production Days | Water Quantity (bbl) | Water Production Days |
---|---|---|---|---|---|---|---|
2011 | CABOT OIL & GAS CORP | 0.00 | 0 | 0.00 | 0 | 0.00 | 0 |
2012 | CABOT OIL & GAS CORP | 4,177.68 | 16 | 0.00 | 0 | 0.00 | 0 |
2013 | CABOT OIL & GAS CORP | 21,430.56 | 365 | 0.00 | 0 | 0.00 | 0 |
2014 | CABOT OIL & GAS CORP | 16,317.71 | 318 | 0.00 | 0 | 0.00 | 0 |
2015 | CABOT OIL & GAS CORP | 7,671.72 | 230 | 0.00 | 0 | 0.00 | 0 |
2016 | CABOT OIL & GAS CORP | 9,666.76 | 359 | 0.00 | 0 | 0.00 | 0 |
2017 | CABOT OIL & GAS CORP | 6,140.13 | 309 | 0.00 | 0 | 0.00 | 0 |
2018 | CABOT OIL & GAS CORP | 2,302.00 | 121 | 0.00 | 0 | 0.00 | 0 |
2019 | CABOT OIL & GAS CORP | 4,821.00 | 220 | 0.00 | 0 | 0.00 | 0 |
For data sources see[7]
Period | Operator | Waste Type | Quantity | Disposal Method | Waste Facility ID |
---|---|---|---|---|---|
2011 | CABOT OIL & GAS CORP | Drilling Fluid Waste | 4,722.57 Bbl | REUSE OTHER THAN ROAD SPREADING | |
2011 | CABOT OIL & GAS CORP | Drill Cuttings | 7.47 Tons | LANDFILL | 101534 |
2011 | CABOT OIL & GAS CORP | Drill Cuttings | 194.32 Tons | LANDFILL | 101247 |
2011 | CABOT OIL & GAS CORP | Drill Cuttings | 3,320.09 Tons | LANDFILL | THR029 |
2011 | CABOT OIL & GAS CORP | Drill Cuttings | 5.69 Tons | LANDFILL | 100081 |
2012 | CABOT OIL & GAS CORP | Produced Fluid | 79.60 Bbl | REUSE OTHER THAN ROAD SPREADING | |
2012 | CABOT OIL & GAS CORP | Basic Sediment | 0.74 Bbl | LANDFILL | THR029 |
2012 | CABOT OIL & GAS CORP | Fracing Fluid Waste | 7,345.37 Bbl | REUSE OTHER THAN ROAD SPREADING | |
2012 | CABOT OIL & GAS CORP | Fracturing Fluid Waste | 12.16 Tons | LANDFILL | THR029 |
2012 | CABOT OIL & GAS CORP | Drill Cuttings | 124.76 Tons | LANDFILL | 301626 |
2012 | CABOT OIL & GAS CORP | Drilling Fluid Waste | 717.17 Bbl | LANDFILL | THR029 |
2012 | CABOT OIL & GAS CORP | Fracing Fluid Waste | 1,986.67 Bbl | CENTRALIZED TREATMENT PLANT FOR RECYCLE | WMGR123NE001 |
2013 | CABOT OIL & GAS CORP | Produced Fluid | 54.64 Bbl | CENTRALIZED TREATMENT PLANT FOR RECYCLE | WMGR123NE002 |
2013 | CABOT OIL & GAS CORP | Produced Fluid | 188.76 Bbl | RESIDUAL WASTE PROC FAC (GENERAL PERMIT) | WMGR123NE002 |
2014 | CABOT OIL & GAS CORP | Produced Fluid | 174.76 Bbl | RESIDUAL WASTE PROC FAC (GENERAL PERMIT) | WMGR123NE002 |
2015 | CABOT OIL & GAS CORP | Produced Fluid | 17.50 Bbl | RESIDUAL WASTE PROC FAC (GENERAL PERMIT) | WMGR123NE002 |
2016 | CABOT OIL & GAS CORP | Synthetic Liner Materials | 0.64 Tons | LANDFILL | 101247 |
2017 | CABOT OIL & GAS CORP | Waste Water Treatment Sludge | 4.78 Tons | REUSE (AT WELL PAD) | |
2017 | CABOT OIL & GAS CORP | Produced Fluid | 5.60 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NC018 |
2018 | CABOT OIL & GAS CORP | Waste Water Treatment Sludge | 0.72 Tons | REUSE (AT WELL PAD) | |
2018 | CABOT OIL & GAS CORP | Produced Fluid | 2.27 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NC018 |
2019 | CABOT OIL & GAS CORP | Synthetic Liner Materials | 0.29 Tons | LANDFILL | 101247 |
2019 | CABOT OIL & GAS CORP | Produced Fluid | 202.21 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NE002 |
2019 | CABOT OIL & GAS CORP | Produced Fluid | 0.39 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NE004 |
For data sources see[8]
Inspection ID | Inspection Category | Inspection Date | Inspection Type | Inspection Result | Inspection Comments |
---|---|---|---|---|---|
1990340 | Primary Facility | 2011-07-22 | Routine/Complete Inspection | No Violations Noted | |
2000375 | Primary Facility | 2011-08-25 | Drilling/Alteration | No Violations Noted | Patterson 252. Company Man not available. 13 3/8" cemented with 460 sks with 25 bbl returns. Set at 585'. Floats held. Secondary containment in place and in good condition. |
2005264 | Primary Facility | 2011-09-21 | Drilling/Alteration | No Violations Noted | Follow up on status of well. Operator had taken excessive gas kick and have been in process of pluggin off gas so they can kick off and drill out. Drill pipe is free @3940'. Well is currently dead with 17.1 mud weight. Coil tubing unit ran out of diesel and uncoiled. At time of inspection trying to get tubing out of hole. Coil tubing unit on site to displace water in drill pipe with 17.1 mud. |
2007054 | Primary Facility | 2011-08-23 | Routine/Complete Inspection | Violation(s) Noted | |
2007193 | Primary Facility | 2011-09-27 | Drilling/Alteration | No Violations Noted | Patterson 252. Have cement plug set. Top of plug at 3350'. Currently no gas present above plug. Bottom of pipe at 3935'. Have 16.6 wt mud in hole and are slowly reduing mud wt at .10 lb at a time ciculating 5 bottoms up each interval. |
2007204 | Primary Facility | 2011-08-29 | Routine/Complete Inspection | Violation(s) Noted | |
2007235 | Primary Facility | 2011-08-25 | Routine/Complete Inspection | No Violations Noted | |
2009267 | Primary Facility | 2011-10-03 | Drilling/Alteration | No Violations Noted | Patterson 252. Flaring at time of inspection. Currently circulating 4 bottoms up at .10 ppg mud weight intervals. Currently at 13.7 ppg. Goal is to bring mud wt down to water weight equivalent while working gas up out of the hole. Drill pipe bottom is at 3300' (50 ' off bottom). Will continue to circulate for several days. |
2012667 | Primary Facility | 2011-10-19 | Drilling/Alteration | No Violations Noted | DEP on site 11:30. Patterson 252. Currently at 11.8 mud wt. Previously weighted down to water wt.and still had minimal amount of gas. At time of inspection rig broke down. Will be going back in hole to tag TOC. Eventually will be running 7" casing to fracture zone @5600' and produce through 7". DEP off site at 12:25. |
2119423 | Primary Facility | 2012-11-21 | Routine/Complete Inspection | No Violations Noted | |
2542988 | Primary Facility | 2016-12-08 | Site Restoration | No Violations Noted | |
2743170 | Primary Facility | 2018-06-18 | Routine/Complete Inspection | No Violations Noted | This well is in production. Personnel were applying temporary stabilization BMPs to the disturbed areas during the inspection. There were no violations noted. If you have any questions, please contact me. |
2757357 | Primary Facility | 2018-07-11 | Drilling/Alteration | No Violations Noted | At time of inspection arrived on location at 15:30. (4) new 20" conductors, 16" mouse-holes and CellarTech units have been set on pad. Liner and drilling mats have been placed on location in preparation for future drilling activities. (4) new annular vent tanks have been placed at edge of pad with annular vents plumbed from cellars to tanks for all (4) new wells on pad.
- There are also (2) existing wells on pad, the 3H and 4H. Both these wells have been temporarily shut in with night caps installed. Both wells had (2) annular vents, the (13 3/8"x 9 5/8") and (9 5/8"x 5 1/2") vents plumbed to individual vent tanks for each well. Gas checks performed at vent tank openings showed: Tank #1 = 100% LEL, 60% CH4; Tank #2 = 100% LEL, 7% CH4. Well heads were covered with protective steel plates limiting access at time of inspection. No markings were noted on these wells vent tanks to indicate which well was which. Gas checks performed 3' away from vent tanks showed 0% LEL, 0% CH4. Since no health and safety concer |
2758427 | Primary Facility | 2018-07-24 | Drilling/Alteration | No Violations Noted | I arrived at the site at 12:49. The weather conditions are cloudy skies, breezy and humid with rain showers and temperatures in the low to mid 70's as I arrived to the site. The rain had stopped shortly after I arrived. Precision Drilling Rig Super Single # 181 is on the location. The current drilling depth is (666) feet. I met with Will Dean, site company man, consultant of Cabot Oil and Gas and Frank Estes of Cabot Oil and Gas out of the Pittsburgh Office. Mr. Dean provided me with the following details in reference to site activities. "The rig mobilized to the site on July 19th. We are currently drilling the 9H well. The surface casing section of this well will be cemented between (720-800) feet. Thus far, the surface casing on the 11H and 13H wells has been cemented. The next well to be drilled with the surface casing cemented will be the 5H. The 3H and 4H were in production, but are currently shut in. The production fluid storage tanks have been removed from the location. Nabors Rig X 36 will dr |
2807103 | Primary Facility | 2018-10-16 | Routine/Complete Inspection | No Violations Noted | Jon Sassi (EPS) and I arrived on site at 1304 to conduct a FUI inspection on behalf of the Department.
Upon our arrival, we spoke with Brian Kudrick (EHS Consultant - Cabot) who directed us to the location of the release and accompanied us until his colleagues arrived. Roughly 10 minutes after beginning our inspection Steve Watson, Brody Webster, and Steve Catalfamo (all of whom were representing Cabot) arrived on site. During our discussion with Cabot, they informed us that the liner used for drilling and well stimulation operations is 40 mil thickness layered in a felt-liner-felt arrangement as seen in photo #4. They informed us that Cabot's SOP is to inspect the liner between drilling and fracing and make any repairs as needed. They then remove any contaminants and lay it back down if it is deemed suitable for reuse. According to the aforementioned Cabot representatives we spoke with on site, 2 roll off dumpsters of material have been excavated so far containing 30 yards each. According to Cabot, the s |
2808691 | Primary Facility | 2018-11-21 | Incident- Response to Accident or Event | No Violations Noted | I arrived at the site at 11:05 in response to a reported spill incident of (10) gallons of diesel fuel. The weather conditions are cloudy skies, breezy and chilly with snow flurries, and temperatures in the low 30's. Steve Watson, Environmental Health and Safety Specialist, and Herb Swiney, completions consultant, both of Cabot Oil and Gas were at the site during the inspection. Keane is the Cabot subcontractor at the site conducting hydraulic fracturing (stimulation) operations for the B Augustine 5H, 9H, 11H and 13H wells. Cabot submitted stimulation notices to the Department on 10/24/18. The comments in the notices indicate that frac operations would begin at 8 AM on 10/25/18. Frac operations are temporarily suspended today, 11/21/18, due to the Thanksgiving holiday according to Mr. Watson. Operations will resume on 11/23/18, Mr. Watson indicated. The 3H and 4H wells are the existing wells on the pad. These wells are currently shut in. The production equipment associated with these wells has been |
Inspection ID | Violation ID | Violation Date | Date Resolved | Violation Code | Violation Type | Violation Comments |
---|---|---|---|---|---|---|
2007054 | 621318 | 08/23/2011 | 2011-08-23 | 691.1 - Clean Streams Law-General. Used only when a specific CLS code cannot be used | Administrative | 402 |
2007054 | 621319 | 08/23/2011 | 2011-08-23 | SWMA301 - Failure to properly store, transport, process or dispose of a residual waste. | Environmental Health & Safety | 6018.610 |
2007204 | 621333 | 08/29/2011 | 2011-08-29 | 691.1 - Clean Streams Law-General. Used only when a specific CLS code cannot be used | Administrative | 402 |
2007204 | 621334 | 08/29/2011 | 2011-08-29 | SWMA301 - Failure to properly store, transport, process or dispose of a residual waste. | Environmental Health & Safety | 6018.610 |
For data sources see[9]