If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.
powered by ChangeDetection
Well ID: 37-115-22455 | Loading map...
{"type":"SATELLITE","minzoom":false,"maxzoom":false,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"mappingservice":"googlemaps3","width":"100%","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"wmsoverlay":false,"copycoords":false,"static":false,"zoom":14,"layers":[],"controls":["pan","zoom","type","scale","streetview","rotate"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"resizable":false,"kmlrezoom":false,"poi":true,"markercluster":false,"clustergridsize":60,"clustermaxzoom":20,"clusterzoomonclick":true,"clusteraveragecenter":true,"clusterminsize":2,"imageoverlays":[],"kml":[],"gkml":[],"searchmarkers":"","enablefullscreen":false,"scrollwheelzoom":false,"locations":[{"text":"","title":"","link":"","lat":41.647439,"lon":-75.961883,"icon":""}]} |
Country: United States | |
State: Pennsylvania | |
County: Susquehanna | |
Municipality: Springville Township | |
Operator Name: CABOT OIL & GAS CORP | |
Well Pad ID: 149402 | |
Farm/Lease Name: FLOWER T 011 | |
License Status: | |
Spud Date: | |
Permit Date: 2018-02-16 | |
Well Type: GAS | |
Unconventional Well: Y | |
Configuration: Horizontal Well | |
Conservation: No | |
Latitude: 41.647439 | |
Longitude: -75.961883 |
Date | Event |
---|---|
2018-02-16 | New Permit Application |
2018-03-06 | Performed Spud Operation |
For data sources see[4]
Job Number | Job Start Date | Job End Date | True Vertical Depth (ft) | Total Water Volume (gal) | Total Non-Water Volume (gal) |
---|---|---|---|---|---|
1 | 2018-06-05 | 2018-06-22 | 7,490 | 8,182,650 | 0 |
Job Number | Trade Name | Supplier | Purpose | Ingredient Name | CAS Number | Additive Percentage by Mass | Job Percentage by Mass | Mass Used (lb) |
---|---|---|---|---|---|---|---|---|
1 | Friction Reducer, KFR-16FW | Keane | Friction Reducer | Water | 7732-18-5 | 60 | 0.0775309 | 60635 |
Distillates (petroleum), hydrotreated light | 64742-47-8 | 20 | 0.0258436 | 20211.7 | ||||
oleic acid diethanolamide | 93-83-4 | 1.5 | 0.00193827 | 1515.88 | ||||
Ammonium chloride | 12125-02-9 | 1.5 | 0.00193827 | 1515.88 | ||||
alcohols, C 12-16, ethoxylated | 68551-12-2 | 1 | 0.00129218 | 1010.58 | ||||
Scale Inhibitor, KSI-19NW | Keane | Scale Inhibitor | Water | 7732-18-5 | 85 | 0.0147515 | 11536.8 | |
organic phosphonic salts | 15827-60-8 | 15 | 0.00260321 | 2035.91 | ||||
Biocide, MBC-516 | Keane | Biocide | Water | 7732-18-5 | 56.7 | 0.00604979 | 4731.39 | |
quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides |
68424-85-1 | 5.3 | 0.000566367 | 442.942 | ||||
Glutaral | 111-30-8 | 26.7 | 0.00284784 | 2227.22 | ||||
didecyldimethylammonium chloride | 7173-51-5 | 8 | 0.000850084 | 664.83 | ||||
ethanal | 64-17-5 | 2.8 | 0.00029865 | 233.567 | ||||
Iron Control, KFEAC-20/30 | Keane | Iron Control | Citric acid | 77-92-9 | 40 | 0.000899807 | 703.717 | |
Acetic acid | 64-19-7 | 60 | 0.00134971 | 1055.58 | ||||
Sand (Proppant) | Keane | Proppant | Crystalline silica: Quartz (SiO2) | 14808-60-7 | 100 | 12.268 | 9,594,470.0 | |
Other Chemical(s) | Listed Above | See Trade Name(s) List | Distillates (petroleum), hydrotreated light | 64742-47-8 | 20 | 0.0258436 | 20211.7 | |
Ammonium chloride | 12125-02-9 | 1.5 | 0.00193827 | 1515.88 | ||||
alcohols, C 12-16, ethoxylated | 68551-12-2 | 1 | 0.00129218 | 1010.58 | ||||
oleic acid diethanolamide | 93-83-4 | 1.5 | 0.00193827 | 1515.88 | ||||
xylene | 1330-20-7 | 3 | 0.00002403 | 18.796 | ||||
Water | 7732-18-5 | 85 | 0.221215 | 173007 | ||||
quaternary ammonium compounds, benzyl-C12-16-alkyldimethyl, chlorides |
68424-85-1 | 5.3 | 0.000566367 | 442.942 | ||||
isoproyl alcohol | 67-63-0 | 3 | 0.00002403 | 18.796 | ||||
Fatty imidaoline | 61790-69-0 | 3 | 0.00002403 | 18.796 | ||||
ethanal | 64-17-5 | 2.8 | 0.00029865 | 233.567 | ||||
Glutaral | 111-30-8 | 26.7 | 0.00284784 | 2227.22 | ||||
Alcohols, C7-9-iso-, C8-rich | 68526-83-0 | 3 | 0.00002403 | 18.796 | ||||
Citric acid | 77-92-9 | 40 | 0.000899807 | 703.717 | ||||
Ethylbenzene | 100-41-4 | 1 | 0.00000801 | 6.265 | ||||
prop-2-yn-1-ol | 107-19-7 | 3 | 0.00002403 | 18.796 | ||||
didecyldimethylammonium chloride | 7173-51-5 | 8 | 0.000850084 | 664.83 | ||||
organic phosphonic salts | 15827-60-8 | 15 | 0.00260321 | 2035.91 | ||||
Water | Cabot | Carrier/Base Fluid | Water | 7732-18-5 | 100 | 87.3115 | 68,284,200.0 | |
Acid Inhibitor, KAI-12 | Keane | Acid Inhibitor | Fatty imidaoline | 61790-69-0 | 3 | 0.00002403 | 18.796 | |
prop-2-yn-1-ol | 107-19-7 | 3 | 0.00002403 | 18.796 | ||||
Ethylbenzene | 100-41-4 | 1 | 0.00000801 | 6.265 | ||||
Methanol | 67-56-1 | 84 | 0.000672946 | 526.295 | ||||
Alcohols, C7-9-iso-, C8-rich | 68526-83-0 | 3 | 0.00002403 | 18.796 | ||||
xylene | 1330-20-7 | 3 | 0.00002403 | 18.796 | ||||
isoproyl alcohol | 67-63-0 | 3 | 0.00002403 | 18.796 | ||||
Hydrochloric Acid (15%) | Keane | Acidizing | Hydrochloric Acid | 7647-01-0 | 15 | 0.0390379 | 30530.6 | |
Water | 7732-18-5 | 85 | 0.221215 | 173007 |
For data sources see[5]
Period | Operator Name | Gas Quantity (mcf) | Gas Production Days | Oil Quantity (bbl) | Oil Production Days | Water Quantity (bbl) | Water Production Days |
---|---|---|---|---|---|---|---|
2018 | CABOT OIL & GAS CORP | 998,582.00 | 150 | 0.00 | 0 | 0.00 | 0 |
2019 | CABOT OIL & GAS CORP | 1,150,370.00 | 365 | 0.00 | 0 | 0.00 | 0 |
For data sources see[6]
Period | Operator | Waste Type | Quantity | Disposal Method | Waste Facility ID |
---|---|---|---|---|---|
2018 | CABOT OIL & GAS CORP | Synthetic Liner Materials | 14.23 Tons | LANDFILL | 101247 |
2018 | CABOT OIL & GAS CORP | Waste Water Treatment Sludge | 40.95 Tons | REUSE (AT WELL PAD) | |
2018 | CABOT OIL & GAS CORP | Produced Fluid | 15,465.33 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NE002 |
2018 | CABOT OIL & GAS CORP | Drill Cuttings | 1,058.73 Tons | LANDFILL | 101247 |
2018 | CABOT OIL & GAS CORP | Other Oil & Gas Wastes | 0.07 Tons | RESIDUAL WASTE PROCESSING FACILITY | 301333 |
2018 | CABOT OIL & GAS CORP | Unused Fracturing Fluid Waste | 3.38 Tons | LANDFILL | 101247 |
2019 | CABOT OIL & GAS CORP | Produced Fluid | 52.38 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NE004 |
2019 | CABOT OIL & GAS CORP | Produced Fluid | 6,636.56 Bbl | RESIDUAL WASTE PROCESSING FACILITY | WMGR123NE002 |
For data sources see[7]
Inspection ID | Inspection Category | Inspection Date | Inspection Type | Inspection Result | Inspection Comments |
---|---|---|---|---|---|
2713340 | Primary Facility | 2018-03-27 | Drilling/Alteration | No Violations Noted | Arrived onsite at: 14:30. Met with WSS, Marcus Cormier. PD Rig #548 was rigged up on the 8H well. Rig has TD'd the 8Hs Prod. hole at a depth of 12,874' and is presently circulating hole. Mr. Cormier plans to be running 5 1/2" Prod. casing in hole tomorrow morning and cementing same later tomorrow afternoon. Rig has previously completed drilling on the 4H, 3H & 10H. Rig has also completed the top hole interval, Surface and Intermediate, of the 7H well on pad. Rig will be skidding to resume drilling on the 7H well after setting and cementing Prod. casing in the 8H well. (See individual well insps for casing set depths and cementing info. for these wells.)
- There were also (2) United Drilling Conductor Rigs onsite setting 16¿ mouseholes and 20¿ conductor for the 6H & 9H wells. These conductors will be set at ~ 100¿ GL. United drilling has previously set 16¿ mousehole and 20¿ conductor for the 11H well. Spud notices were received for all (3) of these conductors. (1) other cellar has been set on pad for the 12H |
2714018 | Primary Facility | 2018-03-22 | Drilling/Alteration | No Violations Noted | Matt Shope, DEP O&G WQS and I arrived at the site at 11:23 to conduct an inspection. The weather conditions were partly cloudy skies, quite breezy and cold with temps in the upper 30's. Precision Drilling Rig # 548 is at the site. Mr. Shope and I went inside of the company man trailer in search of the company man shortly after arrival. He was not inside the trailer. According to the white board on the wall in the trailer, Precision is currently drilling the T Flower 008 well at depth of (2,805.20) feet. Shortly after reviewing the board and computer screen containing information relevant to drilling of the well and reviewing drill cuttings waste manifests, Mr. Shope and I proceeded to conduct an inspection of the site. We had observed that a portion of the secondary containment liner was not secured in (3) separate areas of the site. See photos. We eventually met Marcus Cormier, site company man, consultant of Cabot. We had a brief discussion regarding our site inspection near the rig and where additional we |
2717534 | Primary Facility | 2018-04-11 | Drilling/Alteration | No Violations Noted | Arrived on site at: 11:00. Met with WSS, Sam Morgan. PD Rig #548 has recently batch drilled, set and cemented 13 3/8¿ Surface casing in the 011, 012, 009 and 006 wells. These Surface casings were cemented to surface using Schlumberger, CemCrete blend. Review of cement job reports showed good cement returns to surface and floats held on all (4) wells. Rig has presently skid back to the 011 well and will resume batch drilling the Intermediate intervals of these (4) wells later this afternoon.
- Since my last inspection, PD #548 has completed drilling, casing and cementing the 5 ½¿ Prod. casings in the 008 and 007 wells. To date Rig has TD¿d (5) wells on pad, the 004, 003, 010, 008 & 007. (See individual well insps. for casing set depths and cementing info. for these wells.) - I reviewed Drillers Logs, and cement job logs for the (4) wells recently drilled on this pad. All were found in good order. Rig, location and containments were found in good order at time of insp., no violations were noted. - The existin |
2723074 | Primary Facility | 2018-04-20 | Drilling/Alteration | No Violations Noted | Arrived on site at: 11:00. Met with Well Site Supervisor "WSS", Marcus Cormier and D.E.P. Water Quality Specialists "WQS's", Matt Shope and new hire, Casey Baldwin. Mr. Shope and myself gave Mr. Baldwin a Rig and Location tour accompanied by Mr. Cormier and a Precision Drilling Rep. Purpose of tour was to familiarize Mr. Baldwin with active drilling location, operations and ancillary equipment. We also touched on the differences between areas covered by WQS & OGI inspections. Upon completion of Rig tour I sat down with Mr. Cormier to collect recent drilling details. WQS's and Precision Drilling Rep. continued with location tour / inspection.
- Since my last inspection, PD Rig #548 has recently completed drilling, casing and cementing the 011 wells production casing to a TD of 11,394'. Rig is presently RU over the 012 well and has TD'd the Intermediate interval to 2060' and plan to be running 9 5/8" casing and cementing same this afternoon. - I reviewed Drillers Logs, and cement job log for the 011 wells rece |
2725032 | Primary Facility | 2018-04-20 | Routine/Complete Inspection | No Violations Noted | I conducted the inspection accompanied by Ken Kennedy (OGI) and Casey Baldwin (WQS/ET). Precision Drilling Rig 546 was conducting drilling operations and were currently drilling the 12H Well. |
2756086 | Primary Facility | 2018-07-11 | Routine/Complete Inspection | No Violations Noted | I conducted the inspection accompanied by Jon Sassi (EPS) and Casey Baldwin (WQS/ET). At the time of the inspection, the 11H Well plugs were being drilled out, a Coil Tubing Unit was on the 6H Well, and another service rig was being prepared for the 3H Well. Additional information related to this inspection may be referenced in e-Facts Inspection ID: 2751430. If you have any questions, please contact me. |
2800517 | Primary Facility | 2018-10-16 | Incident- Response to Accident or Event | No Violations Noted | Casey Baldwin, DEP O&GWQS out of the Scranton District Office and I arrived at the site 11:46 in response to a reported spill of an unknown volume and time of a spill of hydraulic fluid to the pad surface. The weather conditions are mostly sunny skies, breezy and brisk, with temperatures in the mid 40's. On 10/16/18 at 8:56, Brody Webster, Environmental Health and Safety Supervisor of Cabot Oil and Gas contacted me to report the spill incident. He stated the following during our phone conversation. "A well tender discovered staining on the pad surface earlier this morning, 10/16/18, as a result of a spill of hydraulic fluid. A coil tube unit recently performed clean out operations on the T Flower 2H well. Hydraulic fluid was released out of the unit and impacted the pad surface. We are not able to calculate the actual volume of the fluid released at this time, but believe it is not more than (5) gallons, and consider this a small spill. GasSearch Drilling Services (GDS) is at the site in the process of |
For data sources see[8]