X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-115-21491

Well Details

Well ID: 37-115-21491
Loading map...
Country: United States
State: Pennsylvania
County: Susquehanna
Municipality: Brooklyn Township
Operator Name: CABOT OIL & GAS CORP
Well Pad ID: 147649
Farm/Lease Name: KEEVES J 10
License Status:
Spud Date:
Permit Date: 2013-09-20
Well Type: GAS
Unconventional Well: Y
Configuration: Horizontal Well
Conservation: No
Latitude: 41.771447
Longitude: -75.781453

For data sources see[1][2][3]

Well History

Date Event
2013-09-20 New Permit Application
2013-09-30 Performed Spud Operation
2014-01-16 New Permit Application
2014-05-06 Drilling Completion
2014-05-24 Perforation
2014-08-16 Performed Stimulation
2015-01-29 DEVIATED

For data sources see[4]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 2014-08-15 2014-09-27 7,131 8,135,360 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 FE-100L FTSI Iron control Water 7732-18-5 60 0.000868266 665.8
Citric acid 77-92-9 55 0.000795911 610.31
FRW-900 FTSI Friction Reducer Oxyalkylated alcohol A Proprietary 5 0.00008930 68.48
Anionic polymer 25085-02-3 40 0.000714398 547.81
Sodium chloride (NaCl) 7647-14-5 5 0.00008930 68.48
Hydrotreated Light Distillate 64742-47-8 30 0.000535798 410.86
Water 7732-18-5 40 0.000714398 547.81
Sorbitan, mono-(9Z)-9-octadecenoate 1338-43-8 5 0.00008930 68.48
Alkyl Alcohol Proprietary 10 0.000178599 136.95
40/70 White FTSI proppant Silica, Quartz 14808-60-7 100 10.3399 7,928,720.0
CI-150 FTSI Acid Corrosion Inhibitor Water 7732-18-5 5 0.00004064 31.16
Fatty Acid Proprietary 0.1 0.00000081 0.62
Aliphatic alcohol Proprietary 0.1 0.00000081 0.62
Dimethylformamide 68-12-2 10 0.00008127 62.32
Fatty Acid Salt Proprietary 0.1 0.00000081 0.62
Quaternary ammonium compound Proprietary 10 0.00008127 62.32
Aromatic aldehyde Proprietary 10 0.00008127 62.32
Alkylene Oxide Block Polymer Proprietary 10 0.00008127 62.32
Ethylene Glycol 107-21-1 30 0.000243815 186.96
Diethylene glycol 111-46-6 1 0.00000813 6.23
Isopropanol 67-63-0 30 0.000243815 186.96
Organic amine resin salt Proprietary 30 0.000243815 186.96
FRW-200 FTSI Friction reducer Copolymer of acrylamide and sodium acrylate 25987-30-8 33 0.030591 23457.5
Dewaxed heavy paraffinic 64742-65-0 1.5 0.0013905 1066.25
Isopropanol 67-63-0 0.3 0.0002781 213.25
Water 7732-18-5 48 0.0444961 34120.1
Alcohols (C12-C14), ethoxylated 68439-50-9 4 0.00370801 2843.34
Surfactant Proprietary 7 0.00648901 4975.84
Hydrotreated heavy paraffinic 64742-54-7 5 0.00463501 3554.17
Alcohols (C12-C16), ethoxylated 68551-12-2 4 0.00370801 2843.34
Alcohols (C10-C16), ethoxylated 68002-97-1 4 0.00370801 2843.34
Sorbitan Monooleate 1338-43-8 3 0.002781 2132.5
Ammonium Acrylate 10604-69-0 0.5 0.000463501 355.42
Acrylamide P/W acrylic acid, ammonium salt 26100-47-0 25 0.023175 17770.9
Acrylamide 79-06-1 0.1 0.00009270 71.08
Polyethylene glycol monooleate 9004-96-0 3 0.002781 2132.5
Ammonium Chloride 12125-02-9 12 0.011124 8530.02
Petroleum distillate hydrotreated light 64742-47-8 26 0.024102 18481.7
Sorbitol Tetraoleate 61723-83-9 2 0.001854 1421.67
Alkyloxypolyethyleneoxyethanol 84133-50-6 1 0.000927001 710.83
100 Mesh Sand FTSI proppant Silica, Quartz 14808-60-7 100 0.577286 442669
CS-500 SI FTSI Scale inhibitor Water 7732-18-5 55 0.0136516 10468.2
Sodium chloride 7647-14-5 6 0.00148927 1141.99
Sodium Polyacrylate 9003-04-7 5 0.00124106 951.66
Acrylic Polymer Proprietary 0 0 0
Ethylene glycol 107-21-1 10 0.00248212 1903.32
ICI-3240 FTSI Biocide Sodium Hydroxide 1310-73-2 23 0.00576594 4421.38
Dazomet (Tetrahydro-3, 5-dimethyl-2H-1,
3, 5-thiadiazine-2-thione.
533-74-4 24 0.00601663 4613.62
Water 7732-18-5 55 0.0137881 10572.9
Water Operator Carrier Water 7732-18-5 100 88.4819 67,848,900.0
Hydrochloric Acid (HCl) FTSI Acid Hydrogen Chloride 7647-01-0 37 0.168097 128899
Water 7732-18-5 63 0.28622 219476

For data sources see[5]

Stimulation Data

Stimulation Date Phase Number Chemical Agent Volume (gal) Treating Pressure (psi) Breakdown Pressure (psi)
2014-08-16 0 0 0

For data sources see[6]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2013 CABOT OIL & GAS CORP 0.00 0 0.00 0 0.00 0
2014 CABOT OIL & GAS CORP 744,579.36 72 0.00 0 0.00 0
2015 CABOT OIL & GAS CORP 2,997,537.77 365 0.00 0 0.00 0
2016 CABOT OIL & GAS CORP 2,342,830.59 366 0.00 0 0.00 0
2017 CABOT OIL & GAS CORP 1,290,796.58 365 0.00 0 0.00 0
2018 CABOT OIL & GAS CORP 1,317,808.00 339 0.00 0 0.00 0
2019 CABOT OIL & GAS CORP 912,249.00 364 0.00 0 0.00 0

For data sources see[7]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2014 CABOT OIL & GAS CORP Produced Fluid 2,704.33 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 1,378.67 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 9,791.61 Bbl REUSE OTHER THAN ROAD SPREADING
2014 CABOT OIL & GAS CORP Fracturing Fluid Waste 16.45 Tons LANDFILL UT2300249
2014 CABOT OIL & GAS CORP Drill Cuttings 1,643.15 Tons LANDFILL 101247
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 10,031.62 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2014 CABOT OIL & GAS CORP Drilling Fluid Waste 120.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2014 CABOT OIL & GAS CORP Drill Cuttings 90.99 Tons LANDFILL THR029
2015 CABOT OIL & GAS CORP Produced Fluid 3.56 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2015 CABOT OIL & GAS CORP Produced Fluid 2,428.26 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2016 CABOT OIL & GAS CORP Produced Fluid 159.24 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2016 CABOT OIL & GAS CORP Produced Fluid 265.04 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2017 CABOT OIL & GAS CORP Produced Fluid 73.58 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2017 CABOT OIL & GAS CORP Produced Fluid 139.27 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Produced Fluid 9.55 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004
2018 CABOT OIL & GAS CORP Produced Fluid 269.05 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Produced Fluid 127.65 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2019 CABOT OIL & GAS CORP Produced Fluid 149.20 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2019 CABOT OIL & GAS CORP Produced Fluid 45.16 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004

For data sources see[8]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2225605 Primary Facility 2013-12-02 Drilling/Alteration No Violations Noted
2269357 Primary Facility 2014-05-06 Drilling/Alteration No Violations Noted
2371984 Primary Facility 2015-05-20 Routine/Complete Inspection No Violations Noted
2473443 Primary Facility 2016-04-11 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:15 a.m., the cellar was about a quarter full of water with no bubbling noticed, the (13x9) vent pipe was open and venting to a tank, the (9x5) vent pipe was open and venting to a tank, there was 752psi on the production casing. I took a walk around the location and everything looked OK.

I left the site at 11:20 a.m.

2612710 Primary Facility 2017-07-05 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:45a.m.

The cellar was about a quarter full of water with no bubbling noticed. The (13x9) annulus vent pipe was open and venting into a small plastic tank, the (9x5) annulus vent pipe was open and venting into a small plastic tank. All the annulus vent pipes were connected to one pipe going into the same tank. There was 624psi on the production casing. I took a walk around the location and there were no obvious concerns noticed. I left the site at 11:40a.m.

For data sources see[9]

References