X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-115-21364

Well Details

Well ID: 37-115-21364
Loading map...
Country: United States
State: Pennsylvania
County: Susquehanna
Municipality: Brooklyn Township
Operator Name: CABOT OIL & GAS CORP
Well Pad ID: 147649
Farm/Lease Name: KEEVES J 2
License Status:
Spud Date:
Permit Date: 2013-07-31
Well Type: GAS
Unconventional Well: Y
Configuration: Horizontal Well
Conservation: No
Latitude: 41.771806
Longitude: -75.781575

For data sources see[1][2][3]

Well History

Date Event
2013-07-31 New Permit Application
2014-01-31 Performed Spud Operation
2014-03-06 Drilling Completion
2014-06-12 Perforation
2014-08-11 Performed Stimulation
2015-01-29 DEVIATED

For data sources see[4]

Fracking Activities

Fracking Jobs

Job Number Job Start Date Job End Date True Vertical Depth (ft) Total Water Volume (gal) Total Non-Water Volume (gal)
1 2014-08-10 2014-09-26 7,098 9,770,960 0

Fluid Composition Data

Job Number Trade Name Supplier Purpose Ingredient Name CAS Number Additive Percentage by Mass Job Percentage by Mass Mass Used (lb)
1 Water Operator Carrier Water 7732-18-5 100 88.2343 81,489,800.0
40/70 White FTSI proppant Silica, Quartz 14808-60-7 100 10.5503 9,743,840.0
Hydrochloric Acid (HCl) FTSI Acid Water 7732-18-5 63 0.302913 279759
Hydrogen Chloride 7647-01-0 37 0.177901 164303
CS-500 SI FTSI Scale inhibitor Ethylene glycol 107-21-1 10 0.00249307 2302.51
Water 7732-18-5 55 0.0137119 12663.8
Sodium Polyacrylate 9003-04-7 5 0.00124653 1151.25
Acrylic Polymer Proprietary 0 0 0
Sodium chloride 7647-14-5 6 0.00149584 1381.5
100 Mesh Sand FTSI proppant Silica, Quartz 14808-60-7 100 0.591737 546506
ICI-3240 FTSI Biocide Water 7732-18-5 55 0.0138756 12815
Dazomet (Tetrahydro-3, 5-dimethyl-2H-1,
3, 5-thiadiazine-2-thione.
533-74-4 24 0.0060548 5591.98
Sodium Hydroxide 1310-73-2 23 0.00580251 5358.98
FRW-200 FTSI Friction reducer Sorbitan Monooleate 1338-43-8 3 0.00271117 2503.93
Ammonium Chloride 12125-02-9 12 0.0108447 10015.7
Water 7732-18-5 48 0.0433787 40062.9
Surfactant Proprietary 7 0.00632606 5842.51
Acrylamide 79-06-1 0.1 0.00009037 83.46
Copolymer of acrylamide and sodium acrylate 25987-30-8 33 0.0298229 27543.3
Alcohols (C12-C14), ethoxylated 68439-50-9 4 0.00361489 3338.58
Ammonium Acrylate 10604-69-0 0.5 0.000451861 417.32
Isopropanol 67-63-0 0.3 0.000271117 250.39
Dewaxed heavy paraffinic 64742-65-0 1.5 0.00135558 1251.97
Alcohols (C12-C16), ethoxylated 68551-12-2 4 0.00361489 3338.58
Alkyloxypolyethyleneoxyethanol 84133-50-6 1 0.000903723 834.64
Petroleum distillate hydrotreated light 64742-47-8 26 0.0234968 21700.8
Polyethylene glycol monooleate 9004-96-0 3 0.00271117 2503.93
Hydrotreated heavy paraffinic 64742-54-7 5 0.00451861 4173.22
Alcohols (C10-C16), ethoxylated 68002-97-1 4 0.00361489 3338.58
Sorbitol Tetraoleate 61723-83-9 2 0.00180745 1669.29
Acrylamide P/W acrylic acid, ammonium salt 26100-47-0 25 0.0225931 20866.1
CI-150 FTSI Acid Corrosion Inhibitor Quaternary ammonium compound Proprietary 10 0.00008612 79.54
Fatty Acid Proprietary 0.1 0.00000086 0.8
Isopropanol 67-63-0 30 0.000258369 238.62
Aliphatic alcohol Proprietary 0.1 0.00000086 0.8
Fatty Acid Salt Proprietary 0.1 0.00000086 0.8
Water 7732-18-5 5 0.00004306 39.77
Organic amine resin salt Proprietary 30 0.000258369 238.62
Aromatic aldehyde Proprietary 10 0.00008612 79.54
Dimethylformamide 68-12-2 10 0.00008612 79.54
Diethylene glycol 111-46-6 1 0.00000861 7.95
Ethylene Glycol 107-21-1 30 0.000258369 238.62
Alkylene Oxide Block Polymer Proprietary 10 0.00008612 79.54
FE-100L FTSI Iron control Citric acid 77-92-9 55 0.000830417 766.94
Water 7732-18-5 60 0.00090591 836.66

For data sources see[5]

Stimulation Data

Stimulation Date Phase Number Chemical Agent Volume (gal) Treating Pressure (psi) Breakdown Pressure (psi)
2014-08-11 0 0 0

For data sources see[6]

Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2013 CABOT OIL & GAS CORP 0.00 0 0.00 0 0.00 0
2014 CABOT OIL & GAS CORP 402,885.11 46 0.00 0 0.00 0
2015 CABOT OIL & GAS CORP 3,489,975.59 365 0.00 0 0.00 0
2016 CABOT OIL & GAS CORP 2,942,514.30 366 0.00 0 0.00 0
2017 CABOT OIL & GAS CORP 1,608,651.86 365 0.00 0 0.00 0
2018 CABOT OIL & GAS CORP 1,427,737.00 338 0.00 0 0.00 0
2019 CABOT OIL & GAS CORP 1,026,081.00 364 0.00 0 0.00 0

For data sources see[7]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2013 CABOT OIL & GAS CORP Drilling Fluid Waste 26.33 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2013 CABOT OIL & GAS CORP Drill Cuttings 306.72 Tons LANDFILL 8-0728-0004/013
2014 CABOT OIL & GAS CORP Produced Fluid 4,012.14 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 1,320.82 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 9,380.80 Bbl REUSE OTHER THAN ROAD SPREADING
2014 CABOT OIL & GAS CORP Produced Fluid 10.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2014 CABOT OIL & GAS CORP Drilling Fluid Waste 440.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NC018
2014 CABOT OIL & GAS CORP Fracturing Fluid Waste 15.76 Tons LANDFILL UT2300249
2014 CABOT OIL & GAS CORP Fracing Fluid Waste 9,610.74 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2014 CABOT OIL & GAS CORP Drilling Fluid Waste 110.00 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR119
2014 CABOT OIL & GAS CORP Drill Cuttings 1,425.69 Tons LANDFILL 8-0728-0004/013
2015 CABOT OIL & GAS CORP Produced Fluid 2,429.17 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2015 CABOT OIL & GAS CORP Produced Fluid 3.56 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE001
2016 CABOT OIL & GAS CORP Produced Fluid 479.30 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2016 CABOT OIL & GAS CORP Produced Fluid 843.86 Bbl RESIDUAL WASTE PROC FAC (GENERAL PERMIT) WMGR123NE002
2017 CABOT OIL & GAS CORP Produced Fluid 183.12 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2017 CABOT OIL & GAS CORP Produced Fluid 363.39 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Produced Fluid 15.53 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004
2018 CABOT OIL & GAS CORP Produced Fluid 1,113.16 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002
2018 CABOT OIL & GAS CORP Produced Fluid 165.13 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NC018
2019 CABOT OIL & GAS CORP Produced Fluid 156.53 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE004
2019 CABOT OIL & GAS CORP Produced Fluid 429.43 Bbl RESIDUAL WASTE PROCESSING FACILITY WMGR123NE002

For data sources see[8]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
2210545 Primary Facility 2013-09-27 Routine/Complete Inspection No Violations Noted Refer to inspection ID # 2210537
2266731 Primary Facility 2014-02-16 Drilling/Alteration No Violations Noted Pressure test on surface casing 15ppg....held for 30 min
2307591 Primary Facility 2014-09-25 Incident- Response to Accident or Event No Violations Noted
2371964 Primary Facility 2015-05-20 Routine/Complete Inspection No Violations Noted
2473402 Primary Facility 2016-04-11 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:15 a.m., the cellar had water at the bottom with no bubbling noticed, the (13x9) vent pipe was open and venting to a tank, the (9x5) vent pipe was open and venting to a tank, there was 740psi on the production casing. I took a walk around the location and everything looked OK.

I left the site at 11:20 a.m.

2612698 Primary Facility 2017-07-05 Routine/Complete Inspection No Violations Noted At time of inspection, arrived on site at 10:45a.m.

The cellar was about half full of water with no bubbling noticed. The (13x9) annulus vent pipe was open and venting into a small plastic tank, the (9x5) annulus vent pipe was open and venting into a small plastic tank. All the annulus vent pipes were connected to one pipe going into the same tank. There was 599psi on the production casing. I took a walk around the location and there were no obvious concerns noticed. I left the site at 11:40a.m.

For data sources see[9]

References