X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

37-105-21406

Well Details

Well ID: 37-105-21406
Loading map...
Country: United States
State: Pennsylvania
County: Potter
Municipality: Pleasant Valley Township
Operator Name: ROULETTE OIL & GAS LLC
Well Pad ID:
Farm/Lease Name: BABCOCK 1
License Status:
Spud Date:
Permit Date: 2007-11-16
Well Type: GAS
Unconventional Well: N
Configuration: Vertical Well
Conservation: No
Latitude: 41.823676
Longitude: -78.187046

For data sources see[1][2][3]

Well History

Date Event
2007-11-16 New Permit Application

For data sources see[4]


Production Data

Period Operator Name Gas Quantity (mcf) Gas Production Days Oil Quantity (bbl) Oil Production Days Water Quantity (bbl) Water Production Days
2010 ALLEGHENY ENTERPRISES INC 2.74 365 0.00 0 0.00 0
2011 ALLEGHENY ENTERPRISES INC 0.00 0 0.00 0 0.00 0
2012 ALLEGHENY ENTERPRISES INC 0.00 0 0.00 0 0.00 0
2013 ALLEGHENY ENTERPRISES INC 9.06 365 0.00 0 0.00 0
2014 ALLEGHENY ENTERPRISES INC 0.00 0 0.00 0 0.00 0
2015 ALLEGHENY ENTERPRISES INC 0.00 0 0.00 0 0.00 0
2016 ALLEGHENY ENTERPRISES INC 0.00 0 0.00 0 0.00 0
2017 ROULETTE OIL & GAS LLC 380.00 365 0.00 0 0.00 0
2018 ROULETTE OIL & GAS LLC 150.00 365 0.00 0 0.00 0

For data sources see[5]

Waste Data

Period Operator Waste Type Quantity Disposal Method Waste Facility ID
2011 ALLEGHENY ENTERPRISES INC Produced Fluid 2.00 Bbl CENTRALIZED TREATMENT PLANT FOR RECYCLE PA0102784

For data sources see[6]

Inspection Data

Inspections Performed

Inspection ID Inspection Category Inspection Date Inspection Type Inspection Result Inspection Comments
1669400 Primary Facility 2007-12-05 Drilling/Alteration No Violations Noted
2378362 Primary Facility 2015-06-09 Routine/Complete Inspection No Violations Noted
2556516 Primary Facility 2017-01-27 Routine/Complete Inspection No Violations Noted
2670685 Primary Facility 2017-12-13 Routine/Complete Inspection No Violations Noted At the time of this inspection this well was in production. All wellhead assembly fittings and flow lines were tested with a gas meter with the results being no gas on well or well area.
2770487 Primary Facility 2018-09-04 Routine/Complete Inspection No Violations Noted At the time of this inspection this well was in production. No combustible gas was detected on the well head assembly or in the well area. No violations noted at this inspection.
2855741 Primary Facility 2019-03-19 Routine/Complete Inspection No Violations Noted At the time of this inspection this well was producing. The wellhead assembly is a casing out of the ground approximately 8" in diameter with a smaller diameter casing approximately 7" inside of it. The smaller diameter casing has a tee (t) style fitting approximately 5" x 2" x 2" threaded on to it. One side of the tee style fitting is an approximately 2" diameter valve that is shut. On the other side of the tee style fitting is an approximately 2" diameter valve that is open and connects to what appears to be a production/flow line. The line goes away from the wellhead assembly and into the ground. The top of the tee style wellhead fitting is a hammer (how it is attached) style fitting with approximately 2" diameter vale that connects the wellhead assembly. No violations noted at this inspection.

For data sources see[7]

References