X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-103-21363

Well Details

Well ID: 34-103-21363
Loading map...
Country: United States
State: Ohio
County: Medina
Municipality: Brunswick Hills Township
Operator Name: LANDMARK 4 LLC
Well Pad ID:
Farm/Lease Name: E P FULLER
License Status: Final Restoration
License Date: 2012-09-21
Spud Date: 1962-07-25
Spud Drilling Contractor:
Final Drill Date: 1962-08-28
Well Total Depth: 3295.00 ft
Configuration: Vertical
Latitude: 41.210000
Longitude: -81.800000

For data sources see[1]

Well History

Well Status Well Status Date Comment
Original Spud 1962-07-25 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.
Completed 1962-08-28 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.
Reached Total Depth 1962-08-28 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.
Change of Owner 2005-04-14 Operator changed from 503, WILLIAMS J F OILFIELD SER to 1171, EQUITY OIL & GAS FUNDS IN
Change of Owner 2009-06-17 Operator changed from 1171, EQUITY OIL & GAS FUNDS IN to 7993, LANDMARK 4 LLC
APP 2012-09-21 Proposed Formations:CLINTON, Issued Date:9/21/2012, Expired Date:9/21/2014 12:00:00 PM, Drilling unit acres:20, Proposed Well Type:OG, Proposed Well Class:
Plugged/Abandoned 2012-11-15 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.
Construction Permit Expires 2014-09-21 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.
Record Last Modified 2017-12-13 UPDATE COORDINATES PER DOGRM SURVEYOR-ALE 12/13/17.

For data sources see[2]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 750 Bbl 25000

For data sources see[3]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1984 JOHN F WILLIAMS OIL FIELD SER 1774.00 902.00 0
1985 JOHN F WILLIAMS OIL FIELD SER 4182.00 917.00 365
1986 JOHN F WILLIAMS OIL FIELD SER 1772.00 616.00 365
1987 BARCLAY PETROLEUM INC 1565.00 607.00 365
1988 JOHN F WILLIAMS OIL FIELD SER 1341.00 536.00 365
1989 JOHN F WILLIAMS OIL FIELD SER 1164.00 608.00 365
1990 JOHN F WILLIAMS OIL FIELD SER 1429.00 595.00 365
1991 JOHN F WILLIAMS OIL FIELD SER 14.00 596.00 365
1992 JOHN F WILLIAMS OIL FIELD SER 909.00 519.00 365
1993 JOHN F WILLIAMS OIL FIELD SER 952.00 606.00 365
1994 JOHN F WILLIAMS OIL FIELD SER 1028.00 618.00 365
1995 JOHN F WILLIAMS OIL FIELD SER 935.00 532.00 365
1996 JOHN F WILLIAMS OIL FIELD SER 921.00 457.00 365
1997 JOHN F WILLIAMS OIL FIELD SER 951.00 445.00 365
1998 JOHN F WILLIAMS OIL FIELD SER 354.00 129.00 365
1999 JOHN F WILLIAMS OIL FIELD SER 0.00 89.00 365
2000 JOHN F WILLIAMS OIL FIELD SER 0.00 38.00 365
2001 JOHN F WILLIAMS OIL FIELD SER 0.00 74.00 365
2002 JOHN F WILLIAMS OIL FIELD SER 0.00 144.00 365
2003 JOHN F WILLIAMS OIL FIELD SER 0.00 49.00 365
2004 JOHN F WILLIAMS OIL FIELD SER 0.00 0.00 365
2005 JOHN F WILLIAMS OIL FIELD SER 0.00 0.00 365
2006 EQUITY OIL & GAS FUNDS INC 0.00 76.00 365
2007 EQUITY OIL & GAS FUNDS INC 0.00 0.00 365
2008 EQUITY OIL & GAS FUNDS INC 4.00 0.00 365
2009 LANDMARK 4 LLC 0.00 23.00 0
2010 LANDMARK 4 LLC 0.00 38.00 21
2011 LANDMARK 4 LLC 0.00 155.00 365

For data sources see[4] [5]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1984 JOHN F WILLIAMS OIL FIELD SER Brine 0 0
1985 JOHN F WILLIAMS OIL FIELD SER Brine 20 365
1986 JOHN F WILLIAMS OIL FIELD SER Brine 10 365
1987 BARCLAY PETROLEUM INC Brine 10 365
1988 JOHN F WILLIAMS OIL FIELD SER Brine 10 365
1989 JOHN F WILLIAMS OIL FIELD SER Brine 10 365
1990 JOHN F WILLIAMS OIL FIELD SER Brine 10 365
1991 JOHN F WILLIAMS OIL FIELD SER Brine 5 365
1992 JOHN F WILLIAMS OIL FIELD SER Brine 35 365
1993 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1994 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1995 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1996 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1997 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1998 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
1999 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2000 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2001 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2002 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2003 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2004 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2005 JOHN F WILLIAMS OIL FIELD SER Brine 0 365
2006 EQUITY OIL & GAS FUNDS INC Brine 15 365
2007 EQUITY OIL & GAS FUNDS INC Brine 0 365
2008 EQUITY OIL & GAS FUNDS INC Brine 0 365
2009 LANDMARK 4 LLC Brine 0 0
2010 LANDMARK 4 LLC Brine 0 21
2011 LANDMARK 4 LLC Brine 0 365

For data sources see[6] [7]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1025257641 2012-11-16 0:00 PB No Violations 1.50
-1517956251 2006-8-31 0:00: PW No Violations 1.00
-1518448126 2017-11-30 0:00 FR No Violations
-1847863770 2007-9-27 0:00: PW No Violations 1.00
-209622402 2013-8-2 0:00:0 FR No Violations
-667992045 2012-10-24 0:00 PW No Violations 2.50
0017079502 2002-07-25 Production Wells No Violations Status check inspection. Inspected the tank battery only. Could not locate the wellhead and will contact John Williams for directions.
0200202163 2011-02-12 UrbanProduction Wells Violations Noted Well is in production and equipped with a pump jack. Fencing needs raised to 8 around well with 3 strands of barbed wire above fence. Well needs flare moved to a minimum of 100 from well head. Report production by March 2011. 1 of snow on ground.
0209622402 2013-08-02 Final Restoration No Violations There was no indication of the well, tank battery, or lease road. The grading and vegetation have been restored to natural conditions. The site is located on the south side of a sanitation facility for the city of brunswick. Final restoration passes.
0574457966 2012-11-15 Plug / Plug Back No Violations I inspected the plugging operation and found the location and lease road to be extremely wet and muddy. Petroset Cementing arrived on location and had to be towed in by a bulldozer and pushed by a trackhoe because of the muddy conditions. The Thompson Well Service crew pulled the 5.5 in. casing up to a depth of 550 ft. Petroset hooked up their cementing equipment and pumped fresh water and broke circulation. Petroset then pumped 55 sks. of Class A cement with 2% gel and placed the cement plug from 550 ft. to 350 ft. The plug was displaced with 8.5 bbls. of fresh water. The service rig crew then pulled approx. 550 ft. of the 5.5 in. casing and stacked it on a trailer. A total of 63 joints of 5.5 in. casing was removed from the well. The service rig crew then hooked up an 8 in. ripper tool and ripped the 8 in. casing at 298 ft. The crew pulled 16 joints of 8 in. casing from the well and stacked it on a trailer. The service rig crew then ran 1.5 in. tubing to a depth of 298 ft. in order to place the cement. Petroset hooked up their cementing equipment and pumped 175 sks. of Class A cement with 2% gel from 298 ft. to the surface. I did witness the cement return to the surface. The service rig crew removed the 1.5 in. tubing and stacked it on the ground. After approx. one hour the cement was still holding at the surface.
0621617573 2006-08-14 Production Wells Violations Noted Well is in production. Gas is blowing off from 1 pipe one foot from well head. Odor of gas in woods. Met with Alaine King, Wade Poll, & Tim Fuller on site to discuss violations on lease and time frames to bring in compliance. Clean up of tank battery will begin this week.Hot, 85 degrees.
0667992045 2012-10-24 Production Wells No Violations I inspected this well and found one pump jack with electric motor on the wellhead. The electric power to the pump jack motor was disconnected as there was no electric line running from the nearest pole to the electric panel for the pump jack. I could not determine the pressure on the casing or tubing due to both gauges being broken. There was a chain link fence with a locked gate surrounding the well and an identification sign was posted on the fence. The area around the pump jack was well maintained, but there was a pile of used bent and broken steel gathering lines to the rear of the well. There also was an old drip tank with regulator and piping still attached laying in the nearby woods. No visible leaks were detected at the wellhead or piping. The electric lines for the pump jack were hanging down no higher than 10 ft. in the air across the access road and were attached to trees, not electric poles. The tank battery was gone and the area where the tank battery once stood was recently excavated and rough graded. The storage tanks and production equipment were removed and gone. I discovered numerous ripped up disconnected steel gathering lines sticking up from out of the ground in the vicinity of the former tank battery. There were several lengths of steel well tubing and casing laying near the excavated area. This former tank battery also handled production for the E P Fuller #2 well. The operator of the well, Landmark 4 LLC, has a current plug permit on file with an issue date of 09/21/2012. I attempted to contact Steve Swain of Landmark 4 LLC and left message with his office to have him contact me. I received no return call.
0854850245 2006-01-12 Production Wells No Violations Case # 05-033 Well is equipped with pump jack, rods, tubing and is pumping. Mud, 50 degrees.
1019863894 2013-08-01 Final Restoration No Violations Appears to be in compliance.
1025257641 2012-11-16 Plug / Plug Back No Violations I inspected this well that had been plugged the previous day and found that small bubbles were coming from the cement surface at the top of the well. I tested the bubbles with a Honeywell PHD 2 multi gas detector. The readings were 0% LEL, 0% CH4 and 0% H2S. The bubbles may be from trapped air from the cement curing process that is now escaping. I advised Harold Moravy, consultant for Landmark 4 LLC, and advised him of the bubble situation. I will be monitoring this situation daily for the next few days.
1271693809 2010-04-19 Production Wells No Violations Well is in production and equipped with pump jack. 2-100 barrel tanks and separator in battery. Gas is being vented due to Columbia Gas has not set meter. Sun, 50 degrees.
1354294564 2012-11-13 Plug / Plug Back No Violations I inspected this well today and found that Thompson Well Service had moved the service rig onto the location and rigged up for the well plugging operation. The well location and the lease road were extremely muddy. After rigging up, the service rig crew pulled the production rods from the well and laid them on a trailer. The service rig crew then hooked onto the 2 in. tubing and removed one joint in preparation for placement of the bottom cement plug. The 2 in. tubing was set at 3236 ft.
1354552129 2012-11-14 Plug / Plug Back No Violations I inspected the well plugging operation and found that the Landmark 4 LLC crew was moving a 150 bbl. water tank onto the location. The site was extremely muddy and moving any equipment around on the location was a difficult task. Landmark 4 LLC pumped 100 bbls. of fresh water into the tank for the plugging operation. The crew then began construction of a 10 ft. x 8 ft. x 6 ft. pit and lined it with a 12 mil. plastic liner. Petroset Cementing arrived on location and set up their equipment and hooked onto the 2 in. tubing. The Petroset operator was instructed by myself and Harold Moravy, the consultant for Landmark 4 LLC, to pump fresh water and break circulation. Apparently, there was a miscommunication because after pumping the water ahead of the cement the Petroset operator went ahead and began pumping the cement before circulation was established. I did notice that gas vapors were coming to the surface around the casing before the cement was pumped. Petroset pumped 25 sks. of Class A cement with 2% gel and placed the plug from 3236 ft. to 3036 ft. The cement was displaced with 11.5 bbls. of fresh water. The Thompson Well Service crew then tripped out the 2 in. tubing from the well and stacked it on a trailer. A total of 105 joints of 2 in. tubing plus one mud anchor joint was removed from the well. The service rig crew then hooked a 5.5 in. ripper tool and ripped the 5.5 in. at a depth of 2120 ft. The service rig crew pulled 30 ft. of 5.5 in. casing and then hooked up Petroset Cementing. Petroset began pumping fresh water and broke circulation and flushed 1 bbl. of crude oil into the pit. Petroset then pumped 80 sks. of Class A cement with 2% gel. The cement plug was placed from 2100 ft. to 1800 ft. and was displaced with 43 bbls. of fresh water. The service rig crew then pulled approx. 600 ft. of 5.5 in. casing from the well and stacked it on a trailer.
1360239692 2012-11-19 Plug / Plug Back No Violations I inspected this well that was plugged on 11/15/12 and found that the air bubbles that were found coming to surface from the cement on 11/16/12 were now smaller and much less frequent. The bubbles were coming at approx. 5 minutes apart. The bubbles were tested with a Honeywell PHD 2 multi gas detector. The readings were still 0% LEL, 0% CH4 and 0% H2S. I will check on the situation again in several days.
1517956251 2006-08-31 Production Wells Violations Noted Wade Pols equipment on site and working on lease and tank battery. Sun, 70 degrees.
1518448126 2017-11-30 Final Restoration No Violations Conducted a follow-up inspection with company personnel to check for possible contamination from the plugging operation, Steve Swain and Jim Schmidt. Met at the main gate for the Sewer treatment plant (Board of Commissioners of Medina County Property), The access used for plugging operation was to the left of the main Gate along the perimeter fence, followed a path which has vegetative cover which went to the north through a wooded area and uphill and into an open crop field. They showed me the approximate location of the well which was real close to the Latitude and Longitude (41.21149, -81.806101) on file in well data base of the Division of Oil and Gas Resources Management. I inspected a 50-foot radius from the given coordinates and found no evidence of Pollution and/or contamination or any evidence of any ruts or gravel left by the plugging operation. I concur with the passing of the final restoration for this well.

Well History: This well was plugged on 11-15-2012 was witnessed by Division of Oil and Gas Resources Management Field Inspector Brian Logue also a final restoration inspection was conducted by DOGRM Field Inspector Rick Kepler on 08-01-2013and another FR inspection was performed on 08-02-2013 by DOGRM field Inspector Amada Trimble.

17079502 2002-7-25 0:00: PW No Violations
1847863770 2007-09-27 Production Wells No Violations Nov in compliance. Landowner is using the gas from well for farm use. Equity is producing the oil. Tank battery identified. Rain, 70 degrees.
1948606057 2006-10-30 Production Wells Violations Noted Violations at this well remain. New gasoline engine on pump jack but belts are missing. Gas still venting to atmospere. Called Alaine King and left a message to retun call on violations. Sun, 50 degrees.
1977532765 2012-11-26 Plug / Plug Back No Violations I inspected this well that was plugged on 11/15/12 and was found to have bubbles coming up through the cement on 11/16/12. I now detect no bubbles in the small amount of water that had accumulated on top of the surface cement plug. I advised Harold Moravy, consultant for Landmark 4 LLC, of the situation and advised him to have crew proceed to remove the top 36 in. of the plugged casing to complete the plug job.
200202163 2011-2-12 0:00: UP No Violations 0.50
574457966 2012-11-15 0:00 PB No Violations 13.00
621617573 2006-8-14 0:00: PW No Violations 3.00
854850245 2006-1-12 0:00: PW No Violations 0.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0200202163 US-OH-120321 2011-02-14 FENCING (a-d)
0200202163 US-OH-120322 2011-02-14 Unlawful venting or flaring of gas
0200202163 US-OH-120323 2011-02-14 Statement of annual production not filed
0621617573 US-OH-127010 2006-08-14 Well operation causing pollution and contamination
0621617573 US-OH-127011 2006-08-14 Well insufficiently equipped to prevent escape of oil and gas
0621617573 US-OH-127012 2006-08-14 Failure to legibly identify well
0621617573 US-OH-127013 2006-08-14 Unlawful venting or flaring of gas
1517956251 US-OH-114418 2006-08-14 Well operation causing pollution and contamination
1517956251 US-OH-114419 2006-08-14 Well insufficiently equipped to prevent escape of oil and gas
1517956251 US-OH-114420 2006-08-14 Failure to legibly identify well
1517956251 US-OH-114421 2006-08-14 Unlawful venting or flaring of gas
1948606057 US-OH-119652 2006-08-14 Well operation causing pollution and contamination
1948606057 US-OH-119653 2006-08-14 Well insufficiently equipped to prevent escape of oil and gas
1948606057 US-OH-119654 2006-08-14 Failure to legibly identify well
1948606057 US-OH-119655 2006-08-14 Unlawful venting or flaring of gas

For data sources see[8]

References