X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-085-21287

Well Details

Well ID: 34-085-21287
Loading map...
Country: United States
State: Ohio
County: Lake
Municipality: Concord Township
Operator Name: ROCKEFELLER OIL COMPANY LLC
Well Pad ID:
Farm/Lease Name: BRADLEY
License Status: Producing
License Date: 2009-01-23
Spud Date: 2009-02-15
Spud Drilling Contractor: GREAT PLAINS EXPLORATION LLC
Final Drill Date: 2009-02-22
Well Total Depth: 3559.00 ft
Configuration: Vertical
Latitude: 41.660000
Longitude: -81.230000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2009-01-23 Proposed Formations:CLINTON, Issued Date:1/23/2009, Expired Date:1/23/2010 6:00:00 AM, Drilling unit acres:21.4, Proposed Well Type:OG, Proposed Well Class:POOL
Reached Total Depth 2009-02-22
Change of Owner 2009-03-30 Operator changed from 7909, JOHN D OIL & GAS COMPANY to 7447, GREAT PLAINS EXPLORATION LLC
Completion Report Received 2009-03-30
Construction Permit Expires 2010-01-23
Change of Owner 2016-12-05 Operator changed from 7447, GREAT PLAINS EXPLORATION LLC to 9828, ROCKEFELLER OIL COMPANY LLC
Record Last Modified 2017-02-15

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2009-06-11 3367 3396 28
3367 3396 28
3367 3396 28

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 431 Bbl 98500

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
2009 GREAT PLAINS EXPLORATION LLC 15375.00 0.00 291
2010 GREAT PLAINS EXPLORATION LLC 6769.00 0.00 365
2011 GREAT PLAINS EXPLORATION LLC 5364.00 16.00 365
2012 GREAT PLAINS EXPLORATION LLC 6326.00 0.00 366
2013 GREAT PLAINS EXPLORATION LLC 4845.00 0.00 365
2014 GREAT PLAINS EXPLORATION LLC 3649.00 0.00 365
2015 GREAT PLAINS EXPLORATION LLC 3117.00 0.00 365
2016 ROCKEFELLER OIL COMPANY LLC 550.00 0.00 61

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
2009 GREAT PLAINS EXPLORATION LLC Brine 1060 291
2010 GREAT PLAINS EXPLORATION LLC Brine 500 365
2011 GREAT PLAINS EXPLORATION LLC Brine 560 365
2012 GREAT PLAINS EXPLORATION LLC Brine 480 366
2013 GREAT PLAINS EXPLORATION LLC Brine 160 365
2014 GREAT PLAINS EXPLORATION LLC Brine 240 365
2015 GREAT PLAINS EXPLORATION LLC Brine 80 365
2016 GREAT PLAINS EXPLORATION LLC Brine 0 304

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1028385790 2018-2-13 0:00: UP No Violations 0.50
-1939390673 2017-12-5 0:00: UP No Violations
-2005622329 2015-2-13 0:00: UP No Violations 0.50
-478683344 2013-10-9 0:00: UP No Violations
-858838870 2018-4-17 0:00: UP No Violations 1.00
-981003884 2009-10-26 0:00 PL No Violations
0478683344 2013-10-09 UrbanProduction Wells No Violations The producing unit consists of a wellhead and aboveground storage tank (AST) battery in separate board-on-board enclosures. The wellhead is a mechanical plunger lift unit and is producing. The battery is comprised of 2 140-barrel steel tanks and separator. Secondary containment, spacing, and signage is good. Process safety equipment (spark arrestor, carbon filter, and low-pressure relief valve) are present. Gates are locked. No problems noted.
0505625395 2012-12-05 UrbanProduction Wells No Violations The unit is comprised of a two-tank battery (2 140-barrel production) and a wellhead with mechanical plunger lift, and mechanical separator, each in separate wood board-on-board enclosures. The well is currently in production. The tank and well spacing is in accordance with 1509:9-9-05 . Unit identification is present and legible at the tank battery. The tank battery secondary containment is adequate. I did not observe any leaks, spills, or other signs of contamination. The gates are locked.
0711781427 2011-07-28 UrbanProduction Wells Violations Noted Dike, ID, and spacing in compliance. Lease road is stable. Fencing in place, no locks on gates. Vent hatches installed and closed. Lighting arrestor and charcoal filter not installed.
0858838870 2018-04-17 UrbanProduction Wells No Violations inspected this well as a follow-up to a previously-issued compliance notice for the following deficiencies: the load-line valves were not locked, and the 8.625-inch casing was not gauged nor fitted with a pressure relief device as required under the special permit conditions which were part of the drilling permit. At the time of this inspection, I observed the following: the were no locks at the load-line valves, and the surface casing nipple was not gauged or fitted with a pressure relief device. The ID signage remained from ownership and not accurate. I had previously contacted the company on several occasions since the issuance of the compliance notice regarding the deficiencies. The company had made pledges to remedy the deficiencies.
0873314079 2016-02-09 UrbanProduction Wells Violations Noted I inspected this well as part of routine inspection activity. The well and associated battery are located in an open portion of an otherwise wooded lot along Crile Rd. The well and battery are accessed via a short, unpaved road that enters from Crile Road. At the time of this inspection, I observed the following: a wellhead with mechanical plunger lift system in a board-on-board enclosure. Fittings and connections at the wellhead were secure. The 8.625-inch casing is valved at surface but not gauged. The battery is comprised of two 100-barrel steel production tanks and separator in a separate board-on-board enclosure. Enclosure gates were locked and secure. Hatches were closed and sealed. Secondary containment was present and intact. Fittings and connections were secure and free from signs of leakage or problems. I walked the areas surround both the well and battery and did not observe any signs of impact relative to the production activity. Signage was present. I noted the following safety issues: The load-line valves were not locked. The owner must remedy the following by 04/08/2016: secure the load-line valves with locks. Place and maintain a gauge at the surface casing nipple as required by permit condition. Contact Inspector Stephen Tompkins at 330-907-4647 with questions regarding this inspection.
0981003884 2009-10-26 Preliminary Restoration No Violations Preliminary restoration meets all requirements.
1028385790 2018-02-13 UrbanProduction Wells No Violations I inspected this well as a follow-up to a previously-issued compliance notice for the following deficiencies: the load-line valves were not locked, and the 8.625-inch casing was not gauged nor fitted with a pressure relief device as required under the special permit conditions which were part of the drilling permit. At the time of this inspection, I observed the following: the were no locks at the load-line valves, and the surface casing nipple was not gauged or fitted with a pressure relief device. The ID signage remained from ownership and not accurate. I had previously contacted the company on several occasions since the issuance of the compliance notice regarding the deficiencies. The company had made pledges to remedy the deficiencies.
1162669597 2017-04-10 UrbanProduction Wells No Violations I inspected this producing well as a follow-up to a previously-issued Compliance Notice. At the time of the previous inspection, I had noted that the load-line valves were not secure with locks as required and the surface casing annulus was not gauged. At the time of this inspection, I observed the following: the access road to the well and battery, which is comprised of a gravel-paved road that enters from Crile Road and travels 700 feet to the well and battery, was in good condition with no drainage problems or wash-outs. The separate enclosure gates were locked and secure. The secondary containment was intact. Fittings and connections at the wellhead and battery were secure and free from leakage. I walked the areas surrounding both the well and the battery and found no signs problems or impact to the surrounding in-situ features. I did observe the following maintenance and safety deficiencies; the load line valves remain unsecured, the ID signage had not been updated to reflect the recent change in ownership, and the wellhead enclosure has been partially dismantled, and the surface casing annulus is not gauged. I contacted John Magnussen with David Oil and advised him about the continuing deficiency. He indicated that the items are being worked on as they are able. I contacted Richard Osborne Sr. with David Oil Co., and as of the date of this report, I have not received a response.
1344173238 2019-02-14 UrbanProduction Wells No Violations I conducted an compliance notice follow-up inspection for compliance notice 873314079, regarding the load-line valves nneding locks installed and the 8.625-inch casing was not gauged nor fitted with a pressure relief device as required under the special permit conditions which were part of the drilling permit. At the time of this inspection, it was observed that the plunger lift assembly equipped well was not in production and the surface casing nipple was not gauged or fitted with a pressure relief device. The tank battery consisted of two 100 BBL tanks and a mechanical separator. The tank valves were still not equipped with locks and the identification still needed updated to reflect current owner information. Lease access to the site was stable with a gate at the entrance.
1887523115 2017-09-25 UrbanProduction Wells No Violations I inspected this well as a follow-up to a previous inspection and associated compliance notice issued for the following issues: missing locks on load-line valves and missing gauge on the surface casing as required as a special permit condition. At the time of this inspection, the noted deficiencies remained. In addition, the well signage remains unchanged since the change in ownership that occurred in 2016. Repeated calls to the owner have not produced any demonstrable action or results.
1939390673 2017-12-05 UrbanProduction Wells No Violations I inspected this well as a follow-up to a previously-issued compliance notice for the following deficiencies: the load-line valves were not locked, and the 8.625-inch casing was not gauged nor fitted with a pressure relief device as required under the special permit conditions which were part of the drilling permit. At the time of this inspection, I observed the following: the ere no locks at the load-line valves, and the surface casing nipple was not gauged or fitted with a pressure relief device. In addition, the ID signage has not been updated to reflect the change of ownership that occurred over 12 months prior to this inspection. I have contacted the company on several occasions since the issuance of the compliance notice. The company has reported that problems with personnel and/or lack of funds, have prevented them from being in compliance.
2005622329 2015-02-13 UrbanProduction Wells No Violations I inspected this producing unit as part of routine inspection activity. The well is located in a commercial/light industrial area on the north side of Crile Rd. The well is comprised of a wellhead with mechanical plunger lift located 200 feet from the tank battery. The battery, mechanical separator, and battery are in separate board-on-board enclosures. The enclosure for the battery is unlocked and I found the gate to be left open. Load outs at the battery are bull-plugged. Connections and fittings are secure and free from signs of leakage or problems. At the time of this inspection, there are 10 to 15 inches of snowfall, which hinders a thorough inspection of surficial features (e.g. access road, secondary containment interior. I notified Tim Reilly (John D. Oil & Gas) about the need for a lock on the gate. I will follow-up in 30 days.
505625395 2012-12-5 0:00: UP No Violations
711781427 2011-7-28 0:00: UP No Violations
873314079 2016-2-9 0:00:0 UP No Violations 0.50

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
0711781427 US-OH-128066 2011-08-01 LOCKS
0711781427 US-OH-128067 2011-08-01 General Safety
0873314079 US-OH-129942 2016-04-27 LOCKS
0873314079 US-OH-129943 2016-04-27 General Safety

For data sources see[9]

References

  1. ↑ "Risk Based Data Management System - Well, tblLocational, tblPlugWell, tblInspection, tblCivilTownships and tblPad Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  2. ↑ "Risk Based Data Management System - Well and WellHistry Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  3. ↑ "Risk Based Data Management System - Perfs Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  4. ↑ "Risk Based Data Management System - tblStimulation Table". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  5. ↑ "Risk Based Data Management System - Production Table - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  6. ↑ "Combined Production - Oil and Gas Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  7. ↑ "Risk Based Data Management System - Production Table - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  8. ↑ "Combined Production - Brine Data". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
  9. ↑ "Risk Based Data Management System - tblInspection, tblInspFail and tblinspFlDesc Tables". Ohio Department of Natural Resources. 2020-11-16. Retrieved 2020-11-16. 
Retrieved from "https://www.wellwiki.org/index.php?title=34-085-21287&oldid=14082548"