X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-019-20383

Well Details

Well ID: 34-019-20383
Loading map...
Country: United States
State: Ohio
County: Carroll
Municipality: Rose Township
Operator Name: G & O RESOURCES LTD
Well Pad ID:
Farm/Lease Name: DOWNES
License Status: Plugged and Abandoned
License Date: 2016-12-15
Spud Date: 1968-09-09
Spud Drilling Contractor:
Final Drill Date: 1968-09-16
Well Total Depth: 5420.00 ft
Configuration: Vertical
Latitude: 40.620000
Longitude: -81.250000

For data sources see[1]

Well History

Well Status Well Status Date Comment
CO 1968-09-06 311 STOCKER & SITLER INC GeoDate 9/6/68
Original Spud 1968-09-09 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17
Completed 1968-09-16 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17
Reached Total Depth 1968-09-16 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17
Change of Owner 1999-07-20 Operator changed from 311, STOCKER & SITLER INC to 5785, M-J OIL COMPANY INC.
Change of Owner 2001-03-13 Operator changed from 5785, M-J OIL COMPANY INC. to 5894, G & O RESOURCES LTD
Plugged/Abandoned 2016-12-02 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17
APP 2016-12-15 Proposed Formations:CLINTON, Issued Date:12/15/2016, Expired Date:12/15/2018 12:00:00 PM, Drilling unit acres:200, Proposed Well Type:OG, Proposed Well Class:
Record Last Modified 2017-06-20 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17
Construction Permit Expires 2018-12-15 UPDATED LOCATION PER SURVEYOR COORDINATES-ALE 06/20/17

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
2006-09-11 5296 5338 22
5296 5338 22
5296 5338 22

For data sources see[3]

Stimulations Data

Stimulation Date Chemical Agent Chemical Agent Concentration (%) Fracking Fluid Volume Mass of Proppant Used (lb) Fracking Company Comments
H2O 0 1510 Bbl 75000

For data sources see[4]

Production Data

Period Operator Name Gas Quantity (mcf) Oil Quantity (bbl) Production Days
1984 STOCKER & SITLER INC 439.00 465.00 365
1985 STOCKER & SITLER INC 1575.00 470.00 0
1986 STOCKER & SITLER INC 524.00 210.00 365
1987 STOCKER & SITLER INC 823.00 368.00 365
1988 STOCKER & SITLER INC 569.00 354.00 0
1989 STOCKER & SITLER INC 526.00 378.00 365
1990 STOCKER & SITLER INC 908.00 592.00 365
1991 STOCKER & SITLER INC 319.00 228.00 365
1993 STOCKER & SITLER INC 399.00 113.00 365
1994 STOCKER & SITLER INC 598.00 175.00 0
1995 STOCKER & SITLER INC 13.00 140.00 0
1996 STOCKER & SITLER INC 0.00 0.00 0
1997 STOCKER & SITLER INC 0.00 0.00 365
1998 STOCKER & SITLER INC 21.00 0.00 365
1999 STOCKER & SITLER INC 0.00 0.00 365
2000 M-J OIL COMPANY INC. 36.00 171.00 365
2001 M-J OIL COMPANY INC. 0.00 38.00 49
2002 G & O RESOURCES LTD 0.00 126.00 365
2003 G & O RESOURCES LTD 0.00 64.00 365
2004 G & O RESOURCES LTD 0.00 58.00 365
2005 G & O RESOURCES LTD 60.00 125.00 365
2006 G & O RESOURCES LTD 121.00 89.00 365
2007 G & O RESOURCES LTD 146.00 52.00 365
2008 G & O RESOURCES LTD 114.00 48.00 366
2009 G & O RESOURCES LTD 99.00 27.00 365
2010 G & O RESOURCES LTD 110.00 38.00 365
2011 G & O RESOURCES LTD 62.00 26.00 365
2012 G & O RESOURCES LTD 38.00 31.00 366
2013 G & O RESOURCES LTD 0.00 21.00 365
2014 G & O RESOURCES LTD 0.00 42.00 365
2015 G & O RESOURCES LTD 0.00 60.00 365
2016 G & O RESOURCES LTD 0.00 0.00 0
2017 G & O RESOURCES LTD 0.00 20.00 365

For data sources see[5] [6]

Waste Data

Period Operator Name Waste Type Quantity (bbl) Production Days
1984 STOCKER & SITLER INC Brine 0 365
1985 STOCKER & SITLER INC Brine 0 0
1986 STOCKER & SITLER INC Brine 0 365
1987 STOCKER & SITLER INC Brine 0 365
1988 STOCKER & SITLER INC Brine 0 0
1989 STOCKER & SITLER INC Brine 0 365
1990 STOCKER & SITLER INC Brine 0 365
1991 STOCKER & SITLER INC Brine 0 365
1993 STOCKER & SITLER INC Brine 0 365
1994 STOCKER & SITLER INC Brine 0 0
1995 STOCKER & SITLER INC Brine 0 0
1996 STOCKER & SITLER INC Brine 0 0
1997 STOCKER & SITLER INC Brine 0 365
1998 STOCKER & SITLER INC Brine 44 365
1999 STOCKER & SITLER INC Brine 34 365
2000 M-J OIL COMPANY INC. Brine 27 365
2001 M-J OIL COMPANY INC. Brine 0 49
2002 G & O RESOURCES LTD Brine 92 365
2003 G & O RESOURCES LTD Brine 37 365
2004 G & O RESOURCES LTD Brine 34 365
2005 G & O RESOURCES LTD Brine 42 365
2006 G & O RESOURCES LTD Brine 44 365
2007 G & O RESOURCES LTD Brine 51 365
2008 G & O RESOURCES LTD Brine 18 366
2009 G & O RESOURCES LTD Brine 28 365
2010 G & O RESOURCES LTD Brine 7 365
2011 G & O RESOURCES LTD Brine 3 365
2012 G & O RESOURCES LTD Brine 6 366
2013 G & O RESOURCES LTD Brine 0 365
2014 G & O RESOURCES LTD Brine 2 365
2015 G & O RESOURCES LTD Brine 21 365
2016 G & O RESOURCES LTD Brine 0 0
2017 G & O RESOURCES LTD Brine 2 365

For data sources see[7] [8]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1000446826 2016-11-28 0:00 PB No Violations 8.00
-2040725744 2015-8-24 0:00: PW No Violations 4.00
0002400521 2016-11-23 Production Wells No Violations I was on locatioin to observe the steaming of the tubing. The area around the well head was cleaned and the hot water was used to break down the large amount of paraffin. This was hauled to a tank to be heated and sold. Pits were closed.
0010485659 2003-02-03 Production Wells No Violations Routine inspection revealed no violations at this time .
0339836906 2017-06-27 Final Restoration No Violations I conducted a final restoration inspection. The well was plugged on 12/05/2016 and a plugging report is on file. The tank battery was shared with permit numbers (20364, 20365) which are still in production so the tank battery was not removed. The access road remains and is shared with the Downes #2 well (#20365). All production equipment and debris has been removed at the well head. The area has been graded, but vegetation has not yet been established. Final restoration can be passed once vegetation has been established.
0859287659 2015-08-05 Production Wells No Violations I conducted a compliance notice follow--impacted soil. The tank battery now consists of one-210 bbl production tank which is equipped with proper plugs on the valves. The leaking heater treater and brine tank have been removed, along with the two unused 100-bbl production tanks. All oil and brine impacted soil has been removed. The dike surrounding the tank battery has been repaired and re-built, and the tank battery is now separated from the Petrox tank battery. Proper identification has been posted at the tank battery. The remaining issues that need addressed in order to close the compliance notice are to post proper identification at the well, remove and properly dispose of all contaminated soil around the wellhead, and to determine the source of the leak so that it can be repaired of immediately.
1000446826 2016-11-28 Plug / Plug Back No Violations Moore Well Service and Appalachia Energy was on location to remove the pumping unit and spot the rig. The rods were removed. Wellhead was repacked and shut in until tomorrow (11/29/2016 ).
10485659 2003-2-3 0:00:0 PW No Violations 0.50
1337194263 2012-05-16 Production Wells Violations Noted My inspection found pollution at the well head and natural gas bubbling below the 4.5 inch casing. I called the number listed for G & O Resources Ltd (330-761-3508) and it went to a fax line. I then called the emergency number listed on the well identification and spoke with Dave Widuck (330-323-6732) and he advised me he would have it cleaned up with in the week. The record shows the well has reported production for 2010 and no other violations are noted at this time.
1338480945 2012-05-31 Production Wells No Violations My inspection found the well no longer leaking and the requirements of the Compliance Notice have been met.
1429727313 2015-03-31 Production Wells Violations Noted I conducted a status check of this well with DOGRM inspector Heidi Scott. Our inspection found this well to be equipped with an electrically-driven pumpjack. The polish rod was not lubricated. Fresh oil measuring 88 inches by 77 inches surrounded the wellhead, and there was active bubbling through the oil at time of our inspection. The tubing valve coming out of the wellhead was open. We were unable to determine if the production casing valves were open at the time of our inspection because they were coated with fresh oil. Inspection of the tank battery found that it consisted of one-210 bbl production tank, one-
1435082140 2015-06-23 Production Wells No Violations I conducted a compliance follow-up inspection of the well and tank battery. The belt guard had been installed on the pump jack. The 8 and 5/8 casing head was exposed so that the source of the leak could be determined, but the well appears to still be leaking as there was active bubbling coming up through the standing water at the well head. The oil-stained soil and previous fresh oil had been removed, however, there was new, fresh oil accumulating in the standing water around the well head. Inspection of the tank battery showed that the unused production tank located north east of the dike, the horizontal separator, and leaking heater treater inside of the tank battery had been removed. The tank battery now consist of one, 210 barrel tank. The brine and oil impacted soil had been excavated out and removed. Construction of a new dike was started, but appears to be unfinished as there are breached and incomplete areas of the dike. No identification was posted at the tank battery.
1440181421 2015-08-21 Production Wells No Violations On site to conduct a follow up inspection on a compliance notice issued by Inspector Ashley Raff for the well leaking gas and oil. Lakeside dug around the well head to determine the source of the leak. A triangle of cement, that was evident around the well prior to excavation, has been totally exposed. The only casing that is visible under the exposed triangle of cement is conductor casing.

Lakeside had removed the contaminated dirt around the well head and the pit around the well is fairly clean of oil. The contaminated dirt is in a stockpile next to the well and Lakeside would like to mix it with manure and spread it near the well. -? leak is still not evident due to the cement triangle being intact, except for the hole at the bottom of the triangle right above the conductor casing. This hole is on the left side of the triangle (s.) if you are facing the pump jack. This is also the side where the gas was bubbling prior to excavation.

Further removal of the cement triangle to determine the source of the oil/gas leak will take place next week.

1441029516 2015-08-27 Production Wells No Violations I was on location to observe the pumping of the above well. The well was pumped for 2 hours on by-pass and the 4.5 casing values were shut there was 72 psi. on the casing. There was no oil or gas seen coming from the 8.625. It appears the oil and gas is released as it pressures up inside the annuals. This may not be related to a 4.5 problem. Dave field man for G&O will talk to his supervisor to see what they are gone to do to repair this problem.
1482867235 2016-11-21 Production Wells No Violations Moore Well Service moving rig on location to pull rods and tubing to prepare to plug well. The rods and pump were removed. Shut in until 11/22/1016.
1482932636 2016-11-29 Plug / Plug Back No Violations Moore Well Service ran 5260 of 2 tubing in the well to spot the bottom plug. Rob Lowe from our survey group was on location to get the well head location. Tubing was landed and the well packed off and shut in over night.
1499296301 2017-06-27 Production Wells No Violations All issues at the tank battery have been resolved. The well was plugged on 12/05/2016. The compliance notice can be closed.
1569165864 2016-11-22 Production Wells No Violations Moore Well Service started pulling the 2-3/8 tubing. The first 1500 tubing was dry then it change to a wet string. We shut down until we got a pit dug and lined it with a 40 mil liner. After a few more joint of 2-3/8 tubing it turned to a paraffin base oil. Tubing was removed well packed in over night. Sutton Pump and Supply will be on location to steam tubing and remove the oil and paraffin from location.
2040725744 2015-08-24 Production Wells No Violations I meet with ODNR Inspector Bob Roush and ODNR Inspector Ashley Raff , Dave Wittick from G&O, Ron Hammond from Lakeside Exv. To discuss the remove of a concrete pad around the wellhead. The well is leaking some oil and gas it looks to be coming from between the 8.625 casing hanger and the 4.5casing. They pumped the well and it showed some oil coming from the annuls. The 4.5 casing pressured up to 80 psi. The pump was shut off. The pressure did not drop to zero but stayed at 70 psi. 4.5 casing integrity looks good at this time. The decision was made to leave the concrete around the well until upper management returns from vacation.
2400521 2016-11-23 0:00 PW No Violations
339836906 2017-6-27 0:00: FR No Violations
859287659 2015-8-5 0:00:0 PW No Violations

Violations Commited

Inspection ID Violation ID Violation Date Violation Code Violation Comments
1337194263 US-OH-109713 2012-05-16 Well operation causing pollution and contamination
1429727313 US-OH-112568 2017-07-17 Well operation causing pollution and contamination
1429727313 US-OH-112569 2017-07-17 General Safety
1429727313 US-OH-112570 2017-07-17 No SPCC dike/or failure to keep dike free of water or oil
1429727313 US-OH-112571 2017-07-17 Dike or pit not able to prevent escape of brine or other wastes
1429727313 US-OH-112572 2017-07-17 Failure to keep dike or pit free of brine or other wastes

For data sources see[9]

References