X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-013-21382

Well Details

Well ID: 34-013-21382
Loading map...
Country: United States
State: Ohio
County: Belmont
Municipality: Kirkwood Township
Operator Name: ASCENT RESOURCES UTICA LLC
Well Pad ID: US-OH-001108
Farm/Lease Name: ALBERT E KKW BL
License Status: Producing
License Date: 2019-04-01
Spud Date: 2018-12-17
Spud Drilling Contractor:
Final Drill Date: 2019-05-13
Well Total Depth: 25830.00 ft
Configuration: Horizontal
Latitude: 40.040000
Longitude: -81.210000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2018-12-10 Proposed Formations:UTICA THROUGH POINT PLEASANT, Issued Date:12/10/2018, Expired Date:12/9/2020 12:00:00 PM, Drilling unit acres:40.099, Proposed Well Type:OG, Proposed Well Class:EOUT
APP 2019-04-01 Proposed Formations:UTICA THROUGH POINT PLEASANT, Issued Date:4/1/2019, Expired Date:3/31/2021 12:00:00 PM, Drilling unit acres:371.101, Proposed Well Type:OG, Proposed Well Class:POOL
Record Last Modified 2019-04-08
Construction Permit Expires 2021-03-31

For data sources see[2]

Perforation Treatments

Perforation Date Interval Top (ft) Interval Base (ft) Number of Shots
8849 25699 0
8849 25699 0

For data sources see[3]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1078166296 2019-8-6 0:00:0 CT No Violations
-1188102617 2020-2-27 0:00: PW No Violations 0.20
-1858261800 2019-7-11 0:00: CT No Violations 0.30
-27489821 2020-1-16 0:00: PW No Violations 0.20
-409273345 2019-9-19 0:00: PL No Violations 0.40
-985404984 2019-2-7 0:00:0 DD No Violations 0.50
0985404984 2019-02-07 Drill / Deepen / Reopen No Violations On the day of my inspection I witnessed that there were 5 existing wells on the pad. The wells were all equipped with 13.375-inch diameter casing and the A section of the well head. At the time of my inspection all the cellars were holding water. Vegetation had not been re-established around the pad and there were no annular pressures to monitor. There was proper signage at the entrance to the lease road and the well had proper identification.
1546788290 2019-01-06 Casing String Witnessed No Violations On site inspection to witness the surface casing cement job with Falcon Drilling rig 26 and C&J Cement Service. The rig has drilled a 17.5 diameter surface borehole on air to a depth of 1,550. The rig conditioned the well bore and pulled the drill string then inserted 1,540 of 61 pound per foot J-55 grade Buttress Thread casing. The depths are off a drilling rig Kelly Bushing heigth of 12 above ground level elevation. Once the pipe was inserted in the well the casing and hole was loaded before commencing the cement job. The cement job consisted of pumping a 35 barrel 6% gel sweep ahead of the 324 barrel cement mix that consisted of 1,530 sacks of class A cement. The cement weight was verified by weight of scale at 15.6 pound per gallon and the yield was 1.19. The cement additives were 1% calcium and 1/4 pound per sack loss circulation material. The cement was displaced with 227 barrels of fresh water to the float collar with the final displacement pressure of 770 pounds pressure and the casing was pressure tested to 1,275 pounds pressure. 57 barrels of cement returns were witnessed to surface inside the cellar and the cement returns were sampled and weighed with a weight of 15.3 pound per gallon by weight of scale.

For data sources see[4]

References