X

Track changes made to this page

If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.



Privacy policy
Close this window

powered by ChangeDetection

34-013-21347

Well Details

Well ID: 34-013-21347
Loading map...
Country: United States
State: Ohio
County: Belmont
Municipality: Pultney Township
Operator Name: XTO ENERGY INC.
Well Pad ID: US-OH-001326
Farm/Lease Name: MILLER UNIT A
License Status: Producing
License Date: 2018-05-30
Spud Date: 2019-04-18
Spud Drilling Contractor:
Final Drill Date: 2019-05-26
Well Total Depth: 19780.00 ft
Configuration: Horizontal
Latitude: 40.000000
Longitude: -80.780000

For data sources see[1]

Well History

Well Status Well Status Date Comment
APP 2018-05-30 Proposed Formations:POINT PLEASANT, Issued Date:5/30/2018, Expired Date:5/29/2020 12:00:00 PM, Drilling unit acres:496.865, Proposed Well Type:OG, Proposed Well Class:POOL
Record Last Modified 2019-04-23
Construction Permit Expires 2020-05-29

For data sources see[2]

Inspection Data

Inspections Performed

Inspection ID Inspection Date Inspection Type Inspection Result Inspection Comments
-1104398582 2019-6-4 0:00:0 PW No Violations 1.00
1104398582 2019-06-04 Production Wells No Violations On the day of my inspection I witnessed Pioneer 77 had ran 2,018 feet of 54.5 pound per foot J55 casing and cemented to surface. At the time of my inspection Pioneer 77 was removing the 18.625-inch diameter riser and was performing a rough-cut casing cut. After speaking with XTO company man David Meeks he informed me that they will remove the lower riser and perform an additional casing cut off. It appeared that cement was still at surface inside of the lower 18.625-inch diameter riser. I informed XTO company man David to keep me updated with any problems that they encounter, a walk around inspection of the rig was performed.
1401804990 2019-05-03 Drill / Deepen / Reopen No Violations On the day of my inspection I witnessed Pioneer Rig 77 was currently drilling the 24-inch diameter well bore at 126 feet with an estimated total depth of 660 feet. After Speaking with XTO Consultant Jason Bryan he informed me that they had just spudded this section of the well bore and will most likely be cementing the 18.625-inch diameter casing on 5/5/2019. I informed Bryan to give me notification when they reach total depth for this section of the well bore and keep me updated with any issues or problems.
1558459994 2019-05-21 Drill / Deepen / Reopen No Violations Status check inspection on the well drilling process found Pioneer Drilling rig 77 on location and currently drilling the 8.750 production well bore horizontal section at a measured depth of 11,038. The rig is circulating the well bore with 13.4 pound per gallon diesel fuel based drilling mud. The proposed total depth for the production borehole is 19,700. The drilling rig floor height is 26 above ground level and the 9.625 intermediate casing string was set at 9,230. The well head assembly is a GE Mandrill type. Also the drilling rig and support equipment is situated on polymer containment.
1565622552 2019-8-12 0:00: CT No Violations 1.00
1976707464 2019-5-4 0:00:0 CS No Violations 15.20
720410573 2020-4-10 0:00: PW No Violations 0.20

For data sources see[3]

References