If you find this page useful and would like to be notified of changes made to this page, start by inputting your email below.
powered by ChangeDetection
| Well ID: 34-029-21774 | Loading map...
{"type":"SATELLITE","minzoom":false,"maxzoom":false,"types":["ROADMAP","SATELLITE","HYBRID","TERRAIN"],"mappingservice":"googlemaps3","width":"100%","height":"350px","centre":false,"title":"","label":"","icon":"","visitedicon":"","lines":[],"polygons":[],"circles":[],"rectangles":[],"wmsoverlay":false,"copycoords":false,"static":false,"zoom":14,"layers":[],"controls":["pan","zoom","type","scale","streetview","rotate"],"zoomstyle":"DEFAULT","typestyle":"DEFAULT","autoinfowindows":false,"resizable":false,"kmlrezoom":false,"poi":true,"markercluster":false,"clustergridsize":60,"clustermaxzoom":20,"clusterzoomonclick":true,"clusteraveragecenter":true,"clusterminsize":2,"imageoverlays":[],"kml":[],"gkml":[],"searchmarkers":"","enablefullscreen":false,"scrollwheelzoom":false,"locations":[{"text":"","title":"","link":"","lat":40.67280221,"lon":-80.88383919,"icon":""}]} |
| County: Columbiana | |
| Municipality: | |
| Operator Name: CHESAPEAKE EXPLORATION LLC | |
| Well Pad ID: | |
| Farm/Lease Name: | |
| First Permit Date: | |
| Last Permit Date: | |
| Spud Date: 2013-08-28 | |
| Unconventional: No | |
| Configuration: Vertical | |
| Well Status: Producing | |
| Violations: 0 | |
| Latitude: 40.67280221 | |
| Longitude: -80.88383919 |
| PERIOD | GAS QUANTITY | GAS PRODUCTION DAYS | CONDENSATE QUANTITY | CONDENSATE PRODUCTION DAYS | OIL QUANTITY | OIL PRODUCTION DAYS |
|---|---|---|---|---|---|---|
| 2015-1 | 202056.0 | 26.0 | 0.0 | 26.0 |
For data sources see[1]
| INSPECTION ID | DATE | DESCRIPTION | COMMENT | VIOLATION ID | VIOLATION CODE | VIOLATION COMMENT |
|---|---|---|---|---|---|---|
| -1377296187 | 2013-02-11 | I went to the site and conducted a pre-construction site inspection with Steve Ault, Chesapeake Field Representative. | ||||
| 1388430302 | 2013-12-27 | I went to the site to witness the cementing of the intermediate casing. The drilling contractor, Nomac 43, drilled a 12.25 diameter hole to 1630'. There were no issues while drilling the intermediate hole. 9.625 OD casing was set at 1624' KB. A total of 13 centralizers were installed on the intermediate casing string. Schlumberger was the cementing contractor. There as good fluid circulation throughout the cementing operation. The cement was mudscaled at 15.6 lbs per gallon (ppg). Schlumberger pumped 127 bbls of cement slurry at 15.6 ppg. Cement returns to the surface were observed. An estimated 22 bbls of cement returned to the surface. The plug was displaced with 116.5 bbls of water. The plug did not bump the float collar. The company decided not to continue displacing the cement. Pressure was held on the cement until it was stable. The company previously estimated the 9 5/8 casing was set at 1585'. The bond log proved the miscount of casing and shows the casing to be set at 1624'. | ||||
| 1811129620 | 2014-01-03 | My inspection found the company to be drilling at 15000'. They plan on running production casing through the night. No violations found. | ||||
| -1941480328 | 2014-12-11 | I was onsite to conduct a preliminary restoration inspection. There is one well on the pad. Access road entry is on the west side of Main Street (SR 644) approximately 0.18 miles south of Yellow Creek Church Road. There is a sign board at the entrance featuring the well names, permit numbers and emergency contact information. There is a padlocked gate at the entrance of the access road. The access road is in good repair, and drainage and erosion controls are in place. Ground cover is well established along the access road. I found the drilling/production pad to be enclosed entirely with a chain link fence with barbed wire at the top, and with a padlocked gate. The pad has a crushed limestone surface, and is in good repair. There is no drainage system installed for the pad. The well is constructed with a | ||||
| 401989182 | 2013-12-25 | I was notified that the company was going to cement the surface casing. The drilling contractor, Nomac 43, spudded the well on 12/24/2013. The 17.50' diameter surface hole was drilled to 593'. There were no issues while drilling the surface hole. Circulation was maintained throughout the drilling. The 13.375 OD surface casing was set at 570' KB. A total of 6 centralizers were installed on the surface casing string. Schlumberger was the cementing contractor. I was informed of good fluid circulation throughout the cementing operation. The cement was mudscaled at 15.6 ppg. Schlumberger pumped 114 bbls of cement slurry at 15.6 ppg. An estimated 25 bbls of cement returned to surface. The plug was displaced with 84.75 bbls of water. The plug bumped the float collar at 4:02am. Schlumberger pressured up on the casing and help pressure for 5 minutes. The plug held and pressure was released. The pressure test on the casing and shoe will be conducted before initiating drilling of the intermediate hole. | ||||
| 551118971 | 2013-08-29 | I witnessed the cementing of the conductor casing. Butch | ||||
| 925110367 | 2013-12-23 | I was contacted today by Chesapeake Exploration. The company requested a change in the surface casing program. The permit has the depth of casing to be set at 640'. The company has requested it to be changed to approximately 572' to 599' of casing depth. The company is going to isolate the fresh water formation with the surface casing. The intermediated casing will cover a salt water zone and the berea sandstone formation. The idea of setting the surface casing shallower is to separate the fresh water and the salt water formation. Tom Hill and I have agreed that the casing program can be changed to the requested depth. | ||||
| 931053730 | 2013-08-20 | I went to the site to review the construction process of the drilling pad. The entry off SR644 was started with crushed limestone, and the access road was built, but the total length was not yet covered in stone. The drilling pad was largely built. A berm has been constructed surrounding the pad. A construction crew was still finishing the drainage, erosion and sedimentation controls. Stone had not yet been spread on the pad. |
For data sources see[2]
| HF Fluid Concentration | Ingredient | Additive Concentration | Trade Name | Purpose | CAS number | Supplier |
|---|---|---|---|---|---|---|
| 0.38047 | Water | 100.0 | Recycled Produced Water | Carrier/Base Fluid | 007732-18-5 | CHESAPEAKE ENERGY |
| 0.0 | No Hazardous Components | 0.0 | PTLSI372 | Scale Inhibitor | NONE | PERFORMANCE TECHNOLOGIES |
| 84.7643 | Water | 100.0 | Fresh Water | Carrier/Base Fluid | 007732-18-5 | CHESAPEAKE ENERGY |
| 0.0074 | Glutaraldehyde (Pentanediol) | 30.0 | EC6111A | Anti-Bacterial Agent | 000111-30-8 | NALCO |
| 0.02562 | Water | 0.0 | EC6111A | Anti-Bacterial Agent | 007732-18-5 | NALCO |
| 0.01227 | Proprietary Aliphatic Hydrocarbon | 30.0 | PTLFR200 | Friction Reducer | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.00205 | Proprietary Oxyalkylated Alcohol | 5.0 | PTLFR200 | Friction Reducer | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.02266 | Sodium Hydroxide | 60.0 | PTLCA102 | Cross Linker | 001310-73-2 | PERFORMANCE TECHNOLOGIES |
| 0.02266 | Proprietary Alkyl Alcohol | 60.0 | PTLCA102 | Cross Linker | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.01133 | Proprietary Inorganic Salt | 30.0 | PTLCA102 | Cross Linker | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.0 | No Hazardous Components | 0.0 | PTLGL240 | Gelling Agent | NONE | PERFORMANCE TECHNOLOGIES |
| 0.00253 | Ammonium Persulfate | 100.0 | PTLBW102 | Breaker | 007727-54-0 | PERFORMANCE TECHNOLOGIES |
| 0.0002 | Proprietary Ethoxylated Alcohol Blend | 10.0 | PTLAI161 | Corrosion Inhibitor | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.0002 | Proprietary Aromatic Aldehyde | 10.0 | PTLAI161 | Corrosion Inhibitor | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 60.0 | Isopropanol (Isopropyl Alcohol | 67.0 | PTLAI161 | Corrosion Inhibitor | Propan-2-ol) | PERFORMANCE TECHNOLOGIES |
| 0.00059 | Proprietary Fatty Alcohol Ethoxylate | 30.0 | PTLAI161 | Corrosion Inhibitor | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.0001 | Proprietary Alkyl Amine Surfactant | 5.0 | PTLAI161 | Corrosion Inhibitor | TRADE SECRET | PERFORMANCE TECHNOLOGIES |
| 0.01094 | Ammonium Persulfate | 100.0 | PTLBW112 | Breaker | 007727-54-0 | PERFORMANCE TECHNOLOGIES |
| 1.03657 | Water | 85.0 | PTLMP136 | Acid | 007732-18-5 | PERFORMANCE TECHNOLOGIES |
| 0.18292 | Hydrochloric Acid | 15.0 | PTLMP136 | Acid | 007647-01-0 | PERFORMANCE TECHNOLOGIES |
| 0.00068 | Proprietary Fatty Amino Adduct | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.042 | Proprietary Aliphatic Alcohol | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.20313 | Proprietary Clay | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.042 | Sodium Chloride | 0.0 | PTLAI161 | PTLFR200 | 007647-14-5 | PTLBW112 |
| 0.20313 | Proprietary Surfactant | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.06086 | Water | 0.0 | PTLAI161 | PTLFR200 | 007732-18-5 | PTLBW112 |
| 0.042 | Proprietary Substituted Fatty Acid Ester | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 2e-05 | Proprietary Oxyalkylated Alcohol | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.20313 | Petroleum Distillate Hydrotreated Light | 0.0 | PTLAI161 | PTLFR200 | 064742-47-8 | PTLBW112 |
| 0.042 | Tetrasodium Ethylenediaminetetraacetate | 0.0 | PTLAI161 | PTLFR200 | 000064-02-8 | PTLBW112 |
| 0.01819 | Proprietary Polycarboxylic Acid Polymer | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 0.20313 | Guar Gum | 0.0 | PTLAI161 | PTLFR200 | 009000-30-0 | PTLBW112 |
| 0.042 | Proprietary Oxyalkylated Fatty Acid Derivative | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 2e-05 | Proprietary Polyether | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
| 2e-05 | Methanol (Methyl Alcohol) | 0.0 | PTLAI161 | PTLFR200 | 000067-56-1 | PTLBW112 |
| 0.04705 | Proprietary Vinyl Copolymer | 0.0 | PTLAI161 | PTLFR200 | TRADE SECRET | PTLBW112 |
For data sources see[3]